Question about kawasaki KX 250 Motorcycles

Open Question

1998 cr80 how do you install kickstarter spring

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 89 Answers

SOURCE: whats the gas mixture for a 1998 honda cr80

well for a two stroke get a small container of 2 stroke oil and mix it with 1 gallon of gas.

Posted on Jun 03, 2009

  • 34 Answers

SOURCE: My 150cc Lifan(Chinese) scooter kickstart won't

It sounds like the gear inside the Left cover is not linged up right i have the same motor and this web site bailed my out of this problem go to www.scootdawg.com it is a great frourm to find all the manual and repair how to fix your scoot For your info the motor on your scooter is known as a GY6 engine parts are all over the place. www.paertsforscooters.com is where i get some of my parts. let me know if you need any more help.
Best Reguards

Larry

Posted on Jan 11, 2010

Testimonial: "Thanks Larry, I waill check it out!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a CR80 and it is impossible to kickstart it when it's cold. The best way is to go downhill and put it in gear to start. Someone here who has an any thougts about what I can do to kickstart my


make sure the choke is working ! look through carb intake and see if you get full choke when on ? clean the carb out and fuel tank , replace fuel if older than 6mths ! only use race 2stroke oil ! if all ok then check compression is above 100psi as below is bad for a 2stroke ! P..

Dec 12, 2013 | 2002 Honda CR 125 R

1 Answer

Rg 150 kickstart not returning


The spring must be "wound" to be tight and make the kickstart lever return..

Jul 07, 2017 | 1998 Suzuki RG 150 Gamma

1 Answer

1998 yamaha 125 kickstart will not retract back when i tighten down side cover


Hi, Masters for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Kickstart Won Come Back Up Help
YZ125 Part 10 2 Stroke Shifter Drum Kickstart Spring Gear ETC
YAMAHA YZ125 Owner Service Manual
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Oct 14, 2011 | 2003 Yamaha YZ 125

2 Answers

Need to change kick start spring


Hi, i am sorry but you dont say what the model of your machine is, this would help me determing the correct, answers for your questions, most kickstart springs can be changed by simply removing the clutch cover followed by the kickstarter shaft and then replacing the spring, make a note of kickstart stop location carefully remove the shaft holding the gears together replace the spring followed by the. Replacing the shaft and tensioning the spring before cover replacment, oil,etc. Some machines the shaft and spring is inside the centre cases and a complete engine strip is ness

Sep 25, 2011 | kawasaki KX 250 Motorcycles

1 Answer

2007 Yamaha Ybr 125 kickstart not engaging


Hi, Jakewhithbrea for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
spring kick start gear problem
Kickstarter spring
Yamaha YBR125ED 2005 Service Manual
OEM parts for Yamaha
Yamaha YBR125ED Owner Manual

Jul 27, 2010 | 2007 Yamaha Ybr 125

2 Answers

1986 xr250 kickstart binding up release clutch cover and works fin tighten bolt and binds up again


The problem was Alloy spacer inside spring that supports spring had turned. Not allowing for shaft to fit in proberly

May 24, 2010 | Honda Xr 250 Motorcycles

1 Answer

My kickstaryer broke off.


If I remember pull the nylon spacer in the middle of the spring out first, this will allow the spring to move away from the shaft

Apr 24, 2010 | 1998 Honda XR 400R

1 Answer

My 125dt dosent sart or kick sart,the gear inside have a bushing in shafting?or it was broken..


Common cause of kickstarter not engaging(I am guesing that this is your problem) is a broken spring on the kickstart mechanism,or that the kickstart idler gear cerclip has fallen off(this allows the idler gear to move forward on the shaft & thus won't allow the kickstart gear to transfer drive to the clutch hub).Remove clutch cover, put kickstart lever back on shaft spline,activate kickstart lever by hand(easier with sparkplug removed+in neautral)as kickstart lever moves down 90 degrees the gear on the kickstarter mechanism should move out to engage with gear next to it(kickstart idler gear).If the gear on the kickstarter mechanism dosn't move outward it has a broken spring on the kickstart mechanism.replace spring and all should work.(if the spring is broken you need to try find the broken piece with a magnetic pick-up tool as the broken part can cause further damage if not removed)To do this job I highly recommend you first purchase a workshop manual which will guide you through these processes.After all a manual is the most valuable tool in your tool kit.

Nov 17, 2009 | 2003 Yamaha YZ 125

2 Answers

Whats the gas mixture for a 1998 honda cr80


well for a two stroke get a small container of 2 stroke oil and mix it with 1 gallon of gas.

Jun 03, 2009 | 2002 Honda CR 125 R

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...