Question about Motorcycles

Open Question

Adjusting rear shock absorber on kawasaki klx250

Posted by Anonymous on

6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 65 Answers

SOURCE: Kawasaki KLE 500 B6F rear shock absorber

hagon shocks will more than likely be the people to contact
a very good British manufacturer
good luck ian

Posted on Dec 31, 2008

  • 72 Answers

SOURCE: adjust rear shocks

YOU should have a tool for that in your tool bag under the seat.

Posted on Mar 23, 2009

  • 53 Answers

SOURCE: Any way to adjust the rear shocks on a 1996 vulcan 1500-a10 ?

dear susan shock adjustment for the rear shock are done with c wrench. you will notice at the top of the shocks there is a ring with 3 adjustment cams. the wrench is placed in the two holes you see on the shock opposite each other this is where the wrench fits you simply turn either direction for softer or harder ride. this adjustment puts more or less tension on the spring. i own a 96 vulcan as well hope this will help you jim

Posted on Mar 26, 2009

  • 1689 Answers

SOURCE: will a rear shock absorber of a zx9r c1 fit a zx9r b1

yep, same link and same position.

Posted on May 21, 2009

SOURCE: My YZ 250 F rear shock absorber fluid and nitro amount

there is no quantity that i can give have to fill that thing completely and make sure you have no air at all in it...maybe you can see this important step on you tube....otherwise the pressure of nitrogen is between 150-175 lbs depending on the way you like you're bike to absorb..make sur you place you're valving shim in right place if you change you seal....

Posted on Sep 16, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Bypass ignition switch

Hi, Ricky I am sorry you can't find the first and best tool you ever bought for your Kawasaki but despair not for a mere $0 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.

Nov 29, 2015 | kawasaki KLX 250 Motorcycles

1 Answer

I have a 2006 kawasaki ninja 650r and i am trying to adjust the riding height, is it possible and how would i do it

no the bike is not fitted with a ride height adjuster you can only stiffen or soften the rear shock absorber preload on the spring or drop the fork through the can on the other hand buy either shorter or longer dog bone links for the rear suspension linkage to lower or lift the rear suspension

Feb 15, 2015 | 2006 kawasaki Ninja 650R

1 Answer

Pulsar 150 DTSi rear shock absorber gas pressure is low. How to fill the gas into shock absorber and how much pressure of gas to be fill into it?........ and normal AIR can fill into shock absorber...

The new Pulsar 150 has RSA with Coil Springs and Suspension Fluid. If the Springs are fine, then get the shocks filled with equal amounts of Fluid at major Service Centers (Few workshops have it).
Else, if the Springs are weak, they can be adjusted by Local Shock Absorber Repairers (Dealers do not suggest it and do not have any mecanism to do it).
If neither of the above works, you have to finally change to a new Set of Rear Shock Absorbers...

Nov 14, 2013 | 2005 Bajaj Pulsar 150

1 Answer

1984 kawasaki gpz 1100.. would you be able to tell me what the air pressure for the rear uni track shock absorber should be?

Around 20psi with shock damping on position three gave a good ride in conjunction with 8psi in the linked front forks; for serious street racery another 10 psi in the shock and max damping helped stiffen things up.

Aug 09, 2011 | 1995 kawasaki GPZ 1100

1 Answer

Is there adjustment in the rear shock? and if so how do U adjust it

Adjusting the rear shock is a realitively simply process, once you expose the shock.

On the left side of the bike, use your key to remove the tool box cover. Remove the inner cover from the tool box and remove the tools that came with the bike. The tool box itself is held in with 2 - 10 mm hex head screws (which also have philips head slots). Remove the tool box.

Now the rear shock absorber should be visible. Use the spanner wrench and handle extension in your tool kit to make the desired adjustments to the shock absorber.

Reverse the process to put everything back together.

Aug 05, 2010 | 2005 Suzuki Boulevard C50

1 Answer

Vulcan 800A (not Classic) Can you adjust the rear shock?

There is a shock company that makes progressive shocks for your bike. That is also the name of the shock, and a lot of them are adjustable eye to eye length. But they are not cheap.

Sep 15, 2009 | 2002 kawasaki VN 800 Vulcan Classic

1 Answer

Kawasaki KLE 500 B6F rear shock absorber

hagon shocks will more than likely be the people to contact
a very good British manufacturer
good luck ian

Dec 31, 2008 | 2006 kawasaki KLE 500

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers


Level 3 Expert

75077 Answers


Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides