Question about 2011 kawasaki KX 450F

Open Question

2011 kx450f wont start, has fresh fuel and gets spark, not sure whats wrong. any ideas?

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 3567 Answers

SOURCE: My 2006 kx450f will not start.

Compression release not fully closing? You have spark and you have air. Fuel is the unknown. Drain the carb float bowl. Now remove the water trap ( if the bike has one ),at the base of the fuel valve. Clean it out and try to start the bike after fresh gas fills the float bowl. You may want to give the air cleaner a shot of starting fluid.

Let me know what happens.

Posted on Mar 24, 2009

Ad
SuperTech-11
  • 1591 Answers

SOURCE: I just bought a 2011

The engine isn't broken in yet, and will probably need to be choked to start in the cold.

Posted on Mar 03, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Won't start


did you drain the fuel line is the fuel pump electric you may be able to disconnect fuel line near engine and pump fresh fuel through the fuel line by powering the fuel pump while putting the old fuel in the lines into a fuel container.

Aug 05, 2016 | Suzuki Motorcycles

2 Answers

I have a 2011 husqvarna 345 xtorq only done 2 hours work .i got spark , cleaned out carb new plug still wont start or even fire any ideas plz


did you check for spark? you need air fuel and spark for engine to operate. check all of these then if it still wont start check the ground wire from coil to switch

Aug 14, 2014 | Garden

1 Answer

Wont start


I would check your fuel first. Replace fresh fuel, check fuel filter if equipped, check fuel line to not be clogged. When trying to start make sure fuel is getting to carb. If after checking all the above, it still doesn't start, I would check the spark. Make sure you are getting a spark, clean and or replace spark plug. Best of luck.

Aug 07, 2012 | Ardisam Earthquake Earth Auger...

1 Answer

Engine wont run with wrong fuel mix


drain the fuel and replace with fresh fuel if you cant get it started you might need to replace the spark plug

May 03, 2012 | Briggs & Stratton Garden

1 Answer

26 hp briggs it is firing and full of fresh gas but wont start.


Well you didn't indicate what its mounted on but the basics are: spark and fuel. Pull a spark plug and make sure you get spark. If you do then it must be fuel. You can try a shot of starting fluid (small amont) into the carb, if it runs on that you know you have a fuel problem. Be sure the carb is getting fuel from the tank. Clean the carb. Maybe a carb kit. With today's fuel, you must take care of your fuel system. Use Sta-bil year round. Fuel can go bad in 60 days.

Jul 18, 2010 | Briggs & Stratton Briggs Stratton Intek V...

1 Answer

My 1994 Camry cranks but wont fully start


As you are finding out ....this is how you kill a car. You need fuel, spark, compression, and air to run an engine. Look for spark and fuel items to be working. A computer controls much of the spark part. They canbe sensitve electrically. If you are cranking ..starter sounds ok. Alt. will act up after you get started. concentrate on spark and spark control. Fuel and fuel control. This is what you need to start.

Jul 14, 2009 | 1994 Toyota Camry

2 Answers

Lawnmower wont start


Possible Causes Corrective actions
Unit will not start Control handle is not engaged Engage control handle spacer.gif spacer.gif
Spark plug wire is disconnected Connect spark plug wire spacer.gif spacer.gif
Fuel tank empty or stale fuel Replace with clean, fresh gas spacer.gif spacer.gif
Blocked fuel line Clean fuel line spacer.gif spacer.gif
Faulty spark plug Replace, clean, or adjust gap spacer.gif spacer.gif
Engine flooded Wait to restart, do not prime spacer.gif spacer.gif
Air filter filled with dirt or debris Replace or clean air filter

May 23, 2009 | Mtd 22" Yard Machine Push Mower

1 Answer

My 2006 kx450f will not start.


Compression release not fully closing? You have spark and you have air. Fuel is the unknown. Drain the carb float bowl. Now remove the water trap ( if the bike has one ),at the base of the fuel valve. Clean it out and try to start the bike after fresh gas fills the float bowl. You may want to give the air cleaner a shot of starting fluid.

Let me know what happens.

Mar 24, 2009 | 2006 kawasaki KX 450 F

Not finding what you are looking for?
2011 kawasaki KX 450F Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...