Question about Suzuki Motorcycles
What kind of gear oil should i use in a 1991 rm 250 and how much ?
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Transmission Fluid Specs
Castrol Syntec motorcycle 10-40wt is what i woul recommend and you have a dipstick. So if you have drained the old fluid start by pouring in 1 qt. then check the dipstick w/ bike level on level ground. Then add a little oil at a time until full..If you have a sightglass instead of a dipstick then fill half to 3/4 up the sightglass. Buy 2qts while your at the store...good Luck to you friend...Tim
Posted on May 10, 2009
It should be stamped on the right side of the engine case. If not most 250s require between .75 and .85 liters
Posted on May 22, 2009
Use 10w40 motor oil in the gear box. Don't use any synthetic oils, oil marked "EC", or oil with "special" additives. Stick with the major brands; Pennzoil, Quaker State, Mobil or Shell.
Use TWO STROKE ENGINE OIL in the pump. If not using an automatic oil pump, then mix the gas and oil 32 to 1. That equals 4 ounces of TWO STROKE ENGINE OIL to one gallon of gas. NEVER use motor oil in the gas. Only two stroke engine oil.
Please top rate this answer. Thanks!
Posted on Jun 07, 2009
Tips for a great answer:
Jul 13, 2011 | 2003 Suzuki RM 250
Feb 19, 2010 | 2005 Suzuki RM 250
Aug 23, 2009 | 2003 Suzuki RM 250
Dec 29, 2008 | 2003 Suzuki RM 250
Jun 07, 2015 | Suzuki VL 125 Intruder LC Motorcycles
23 people viewed this question
Usually answered in minutes!