Question about 2004 Suzuki DR-Z 250

1 Answer

I have a suzuki dr 250 1990 and it makes a funny grind noise when you let this cluch out in gear, but only when it has just bean started and warmed up, and i dont no how to tighten it and what not so any idea what i should do about that?? i woud also like to no how to test my speedo, i have the speedo on but it has no cable at the moment and i dont want to spend the money on the cable then realize it dosnt even work, so any ideas how to test it and also a rough prise and were to get one, thanks i just got this bike so if you have any pointers on how to get more out of it and more power, that would be very helpful

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

It sounds like it may be some kind of lubrication problem with the clutch, as the bike warms up and the oil thins out it lubricates better thus reducing the grinding noise, check all your fluids and see if that helps. Check round your local wrecking yards for any spares like speedo cables and stuff, a speedo cable shouldnt be any more than 20 bucks. In regards to getting better speed, a good set of pipes will always give you a boost and you can also much around changing the sprockets to give you better acceleration or top speed which ever you are after.

Posted on Jul 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The 5th gear in my dr 650 se went out it was slipping and now it acts like somthing is boging the engine so its parked.


How to drive a DR650 : Dualsport - Reddit

https://www.reddit.com/r/Dualsport/.../how_to_drive_a_dr650/

RedditNov 8, 2014 - As my username indicates, I ride a Suzuki DR650 (2003, 11000km). ...When I do say 50 km/h with a car would drive in the fourth or even fifth gear. .... The only thing to look out for is lugging; a deep rumbling sound. ... I can point you in the direction of a good course and maybe even go for a ride sometime.

DR650 popping out of 5th gear - DR - ThumperTalk

www.thumpertalk.com > ... > Make / Model Specific > Suzuki > DR

Feb 2, 2008 - 7 posts - ‎7 authors
DR650 popping out of 5th gear - posted in DR: Went and looked at an 03 DR650. When I got ... This only happened in 5th, and the owner confirmed that this is the only gear that this occurs. The bike ... Just my opinion though.

Problem with 2012 DR650 engine - DR - ThumperTalk

www.thumpertalk.com > ... > Make / Model Specific > Suzuki > DR

Jul 7, 2013 - 9 posts - ‎7 authors
Hi, so I am posting for my girlfriend, she rides a DR650 2012 that just ... in 5th gear the whole time and out of nowhere the RPM just went up.

Suzuki DR650 First Ride - webBikeWorld


Jan 08, 2016 | Motorcycles

1 Answer

Does a 2003 suzuki 125 dr-z have a wet clutch? and if yes how much gear oil do you put in & what kind?


Your motorcycle is equipped with a wet clutch . The engine, clutch, and the transmission all run in the same oil. Use any oil that is JASO MA certified motorcycle oil. 10w-40 for cold climate. 20w-50 for warm climate/touring. Car oils use different additives and may cause scoring in certain types of cam bearings. Do not use any oil that says " Energy Conserving " on the label . It will shorten the life of your wet clutch and transmission gears. If you choose Synthetic oils, they will help your bike run cooler and shift easier.

Jan 10, 2011 | 2003 Suzuki DR-Z 125 L

1 Answer

Need to find out the clutch disc spec's for a 03 suzuki orzak 250


the easy way to find out if the cluch is slipping is to ride the bike in top gear pull in the cluch rev the bike up to high revs and drop the cluch if the engine dont drop in revs very fast and the revs only drop slowly its slipping if this happens check that you have a small amount of slack in the cluck cabel ie: 1/4 of an inch is ok if its to tight it will cause the cluch to slip as the engine warms up

Jan 14, 2010 | 2003 Suzuki 250 SB

2 Answers

1978 suzuki dr 370 motorcyle just started having a problem. When in neutral the transmission makes a popping type noise intermittenly. when this occurs it tries to jump into gear. ant idea


The popping noise is gear dogs trying to engage a gear. You did not say that the bike doesn't shift smoothly so I would tend to rule out a bent shift fork. The neutral stopper pin may be worn or the stopper spring or other springs may be broken (see diagram). Another possibility is a broken stationary gear circlip which would let the gear wander a bit on the shaft. most the parts are available at Babbitt's. Go to www.babbittsonline.com/parts/viewbybrand/parts.aspx

0d5c3c9.gif

Dec 22, 2009 | 2003 Suzuki RM 125

1 Answer

Hi when bike starts from cold theres a knock/grind noise that the engine makes for about 15/20 seconds and then goes,when warm and restarted no noise she runs rearly well when warm or cold


that is because oil gets cool............there will be no problem when oil is normal..........nothin to worry about this........keep reving your engine

Nov 10, 2009 | 1999 Suzuki GSF 1200 Bandit S

1 Answer

HOW DO I KNOW WHEN THE THRUST BEARING IN MY SLAVE CYLINDER ON MY BMW GS 1150 IS GONE? WHEN THE BIKE IS WARM AND THE CLUTCH IS HELD IN THERES A KNOCKING NOISE COMING FROM THE CLUTCH, WHEN I RELEASE IT THE...


who told you that???? a wally or what?
im sorry to tell you the cluch slave cylinder has nothing to do with the cluch thrust bearing the slave cylinder only operates the cluch rod,, which inturn pushes on the cluch thrust bearing which then disengages the cluch,,,if the trust bearing is warn or wearing out it rumbles or starts a knocking sound from the gear box,, this noise gets worse as the cluch bearing wears out,, finaly it starts to realy screem,, bad like!!! the problem is,, you need a new cluch fitted to the bike which is far from cheep to get repaired,,,,,and its a big job too,
i hope this has put you right,,
good luck,,from1 biker 2 another

Nov 03, 2009 | 2001 BMW R 1150 GS

1 Answer

IV A PROBLEM WITH MY 91 SUZUKI DR 650 I JUST FITTED NEW STARTER CLUTCH AS I THOUGHT THIS WAS MY PROBLEM BUT IT ISNT,WHEN YOU HIT THE START BUTTON TO START THE BIKE THE SPROCKET BEHIND THE FLY DOESNT SEEM...


Sounds like your starter solenoid is not engaging. Try tapping it with a dead blow hammer or a hammer and block of wood (gently! Not to hard!) If it bumps over that is your problem. Also check all connections to solenoid and starter.

The whirring noise you are hearing is your starter motor but your bendix gear is not engaging.

Hope this helps!
Rob

Sep 21, 2009 | 1990 Suzuki DR 650 RS

1 Answer

Where can i find part numbers and parts for my DR 750 S big?


that is a cdi problem. you need to buy a new one.

Feb 06, 2009 | 1989 Suzuki DR 750 S

Not finding what you are looking for?
2004 Suzuki DR-Z 250 Logo

561 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4497 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...