The gauges on my fiat scudo ie temperature ,speedo ,,clock mileag

Often times more than one gauge having a problem is related to the common ground.

Once you gain access to the connections behind the dash, just unplug/disconnect and then plug/connect the harness/wiring back into the gauge panel to see if you get a reading. If not, you'll need to trace the wiring using a digital voltmeter as well as verifying the grounding wires. Any connections that aren't clean should be sanded lightly and a light coat of grease applied. Di-electric grease is best as it seals out moisture but won't cause a connection.

it may be a blown fuse, check all the fuses.....cheers

On this website you find fuse box diagram and description for Fiat Scudo mk2

Fiat Scudo mk2 2006 2016 fuse box diagram Auto Genius

sounds like ignition barrel to me.

there are 4 10mm bolts at the back between the manifold pipes an 2 at the front

I'm dealing with the same issues on mine: check the speedo cable is properly hooked up on the back of the instrument panel and at the sender on the transmission. Check your electrical connections and fuses are ok for all the other instruments.

Sounds like there is a fuse burned out. Would be labeled I/P or INST

dealer only for the parts ,and they are all available

sound like a wiring problem check the starter and ignition switch could have a short to ground or short to power

i want to reprogramme or change the immobiliser code on my fiat scudo van r reg?