Question about 1995 Honda CBR 900 RR Fireblade

2 Answers

Front fork Just want to know witch kind and how much oil goes in front forks for cbr 900 rr 1995

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You can use auto transmission oil to (it will not boil).

Posted on May 15, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 74 Answers

10w, 120ml

Posted on Jan 16, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Please could you tell me how many ml of forkoil or air gap for a cbr 900 fireblade 1997 thanks

the fork oil level should be 100 to 110 mm from the top with the fork cartridge blead & the fork fully compressed. To blead the cartridge, slowly pump the cartridge rod up & down untill you can feel smooth resistance for the FULL stroke of the rod- Both in & out.

let me know if you have any other questions.
Regards Andrew Porrelli

Apr 24, 2011 | 1999 Honda CBR 900 RR Fireblade

1 Answer

How much oil do you put in the front forks when changing the fork seals on a honda fireblade 900 rrw model on a t reg

It's hard to get specs in mls or cc these days so I'll let you in on a BIG secret(don't tell everyone,hush hush,& we stay wiser than others,promse not to tell, cross your heart).

Ok here we go- NO this ISN'T a joke so listen carefully.

Set the oil levels in the front forks

with the cartridges blead(simply draw up & down on the damper rod & you can feel the air bleeding out),

& before you re-fit the springs,

With the forks fully compressed
The fork oil level should be 100-110mm from the top.
This applies to basically all forks(except-a few like MX showa on certain RMs' & the new kawasaki 250 MXer.)
Hope this helps
Regards Andrew

Jul 14, 2010 | 1999 Honda CBR 900 RR Fireblade

1 Answer

How to replace top front fork seals on a 99 honda cbr 900

If you have never taken your bike front-end off for any type of maintenance, you better get a friend who can show you step by step process, as it requires mtre just taking the fork off the bike once you get into the for to replace the seals and putting the fork oil into it.

Apr 25, 2010 | 1999 Honda CBR 900 RR Fireblade

2 Answers


Measure the diameter of the forks and the position of the yokes(clamps that hold the forks)Also fork length.If they are are the same,bolt them on.Best if you have the entire front end with wheels brakes etc as its less work to do.Different part no's is the springs and valves in the forks that are very slightly different.Hope this helps

Dec 31, 2009 | 1997 Honda CBR 900 RR Fireblade

2 Answers

Have to do fork seals on my honda900rrw how much fork oil and what oil would you recemend

usually, i put about 425cc of fork oil in each fork. you can fit a little more in there to make stiffer or use no less the 370cc for softer.

Jun 14, 2009 | 1998 Honda CBR 900 RR Fireblade

1 Answer

Do i fill forks raised or on ground?

If you are replacing the oil the fork tubes should be removed. If you are just topping off the existing oil then just raise and fill.

May 19, 2009 | 1995 Honda CBR 900 RR Fireblade

1 Answer


no you can change the seal and the oil just make sure you measure the oil you remove and put the same amount back in

Apr 14, 2009 | 1995 Honda CBR 900 RR Fireblade

1 Answer

Front forks

honda ss8 lh/rh-4.5'' from top of fork tube

Feb 11, 2009 | 1998 Honda CBR 900 RR Fireblade

Not finding what you are looking for?
1995 Honda CBR 900 RR Fireblade Logo

569 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers


Level 3 Expert

70347 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides