Question about 1991 Suzuki VS 1400 Intruder
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hi ...... Find where the battery is, under the seat or behind a side panel. Disconnect the black (negative lead usually with a 10mm spanner then disconect the red (positive) lead. The battery will be held in place with a 'rubber' strap or a bracket and depending on type of battery there may be a vent hose from the battery to the lower half of the bike, this just pulls off and remains in place until you replace the battery. Installation is reverse except you connect red (positive) first.
Let us know how you get on.
Posted on Jan 20, 2009
One the left-hand side of the bike (facing forward), there is cover plate just ahead of the drive shaft. Remove that cover (mine has 8mm bolts). The bleeder valve is under this cover. Go to an auto parts store and get a "one man bleeder kit" or if you have some plastic tubing that will fit over the valve, you can use that and a clean jar. Follow the instructions on the bleeder kit, or if you're using the jar and tubing, fill the jar about a quarter of the way with break fluid (use DOT4, but never DOT5!). Take the cover off the master cylinder up at the handlebars, place the tube over the end of the bleed valve (after loosening it a turn or two. Place the other end of the tube down in the break fluid in the jar. Work the clutch lever until you stop getting bubbles in the jar. Be sure to keep the fluid level up in the reservoir. Tighten the bleeder valve, remove the tubing, top off the fluid and replace the covers.
Be careful not to get brake fluid on anything. It will eat paint and mess up other things.
Posted on Feb 13, 2009
i have a 2002 volusia intruder 800cc and the bike was runnning fine. i change the oil/oil filter/removed the radiator hose and drain the radiator/ replace spark plugs and when it was time to start the bike it started and then stalled out/ can't keep the bike running. check the fuel filter and it appears to be o.k. don't know whether or not i should change the fuel pump???
Posted on Apr 06, 2010
Tips for a great answer:
Feb 21, 2018 | 1995 Suzuki VS 1400 Intruder
Jul 01, 2017 | 2003 Suzuki VS 1400 Intruder
Apr 21, 2017 | 1999 Suzuki VS 1400 Intruder
Mar 19, 2017 | Suzuki VS 1400 Intruder Motorcycles
Feb 21, 2017 | 1995 Suzuki VS 1400 Intruder
May 08, 2016 | Suzuki Motorcycles
Feb 13, 2016 | Suzuki Motorcycles
Feb 26, 2013 | 1991 Suzuki VS 1400 Intruder
Mar 05, 2010 | 1994 Suzuki VS 1400 Intruder
627 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: