Question about 2003 Suzuki GZ 125 Marauder

Open Question

Sissy bars for 125 marauder - 2003 Suzuki GZ 125 Marauder

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 278 Answers

SOURCE: i want to remove the sissy bar on my suzuki vl

More than 2 bolts hold a back rest. Continue

Posted on Oct 13, 2009

Ad
  • 88 Answers

SOURCE: Installation of Sissy Bar

the bolts on the rear fender area hold the sissy bar as well as the rear fender. I had the same difficulties. you will have to buy long bolts that will fit through the sissy bar and through the chrome and then through the fender. I found this out the hard way when I removed the sissy bar and did not replace the bolts. the rear fender was close to falling off the bike.
the bolts are found in diy stores. the only restriction is to make sure the bolt does not go into the area of the rear wheel so that it might come in contact with the tyre.

Posted on Aug 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Looking for a sissy bar for a 1985 honda magna vf700c.can only find 1984, 1986, & 1990's. Will they fit mine?


Hi, Beth after careful deliberation 4 out 5 Honda Gods give this one a thumbs up, but just to be on the safe side you should give your local dealer's parts/service department a call to confirm. For more information about your issue and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have a nice day.
HONDA MAGNA 700 750 SISSY BARS BACKRESTS AND RACKS
Cobra 1985 Honda Magna V42 VF700C Backrest Pads Sissy Bar Pads
Seats Sissy Bars
https://drive.google.com/file/d/0B6uU39dq308cNTUzODE4NmYtMDIxNy00MzAwLWFkZDUtNDNkMWUxYTVmYWQx/view?ddrp=1&hl=en&pli=1#

Mar 28, 2016 | Honda Motorcycles

1 Answer

How to install a sissy bar


There are different mounts for a sissy bar. If it is a permanent mount sissy bar it mounts on the side fender braces. If you bought it new, the replacement bolts and shims( if required) should hve came with it

Jul 29, 2011 | 2004 Harley Davidson FLSTC - FLSTCI...

1 Answer

How do remove the seat? I've removed the bolt attached to the rear fender. The book says to pull the seat back to release the hook from the frame? The seat doesn't want to pull back toward the rear.


If you have a sissy bar on the bike, you'll have to lift the rear of the seat a bit to get the clearance necessary for the seat to slide to the rear. If that doesn't work, take the sissy bar off by removing the two small bolts on either side of the sissy bar side plates. With the sissy bar off, the seat should come off easily.

Good Luck
Steve

Nov 28, 2010 | 2005 Harley Davidson FXDL - FXDLI Dyna Low...

1 Answer

How to change low sissy bar on a 2000 FLSTC


Look on either side of the sissy bar down near the base. There are usually two bolts on each side. Remove these bolts and the sissy bar pulls out of the side plates which stay on the bike.

Good Luck
Steve

Oct 08, 2010 | 2000 Harley Davidson FLSTC Heritage...

1 Answer

Installation of Sissy Bar


the bolts on the rear fender area hold the sissy bar as well as the rear fender. I had the same difficulties. you will have to buy long bolts that will fit through the sissy bar and through the chrome and then through the fender. I found this out the hard way when I removed the sissy bar and did not replace the bolts. the rear fender was close to falling off the bike.
the bolts are found in diy stores. the only restriction is to make sure the bolt does not go into the area of the rear wheel so that it might come in contact with the tyre.

May 13, 2010 | 2005 Suzuki Boulevard M50

2 Answers

Tyre Pressure


As always, correct pressure depends on the tyre fitted but if it is running with the standard tyres that it had fitted from new then:
Single rider: Front is 1.75 bar (25 PSI) Rear 2.0 (29 PSI)
Fully loaded (Panniers and or pillion passenger) Front 2.0 bar (29 PSI) Rear 2.25 bar (32 PSI)

These settings from the book for a 2006 model, though I imagine that they apply to all with very little if any variation

Jan 23, 2009 | 2003 Suzuki GZ 125 Marauder

2 Answers

Wiring diagram


The Haynes Service and Repair Manual ISBN 1844252787 has the wiring diagrams for GZ 125 Marauders from 1998 to 2005.

Nov 10, 2008 | 2003 Suzuki GZ 125 Marauder

Not finding what you are looking for?
2003 Suzuki GZ 125 Marauder Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...