Question about 1995 kawasaki ZX-6R Ninja
Posted by Anonymous on
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: oil change 1995 kawasaki ninja
you need to put on service stand and pull out oil plug after draining oil filter and drain all engine oil put new filter in and us sae 10 w 40 oil
Posted on Apr 13, 2009
Carburator Theory and Tuning
For some reason everyone seems to think tuning a carb is just real easy. Change a jet or two and boom, your there. Yeah, right ! There are quite literally millions and millions of jet combinations. A rough check on Bing carbs shows there are at least 13,860,000 different combinations of jets. If you are going to change carbs you'd better be prepared to spend some time and money on the job.
If you look at a carburetor, you will notice a rather large hole going from one side to the other. This is called a Venturi. Air passes into the engine through this hole (Venturi). As the velocity of the air entering the carb (and then the engine) increases, it's pressure decreases, creating a low pressure or vacuum in the venturi. This vacuum moves around in the venturi, as the throttle is opened, and sucks gasoline through the different jets in the carb. The gas then mixes with the air going through the venturi. The way the jets are made causes the fuel to vaporize as it goes into the venturi. Where the jets are placed in the carb and where the jet's outlet is located in the venturi, determines what part of the throttle opening that jet controls. The idle jet system (comprised of pilot air jet, pilot fuel jet and pilot fuel screw) controls from 0% to about 25% of the throttle opening. The throttle valve controls 0% to 35% of the throttle opening. The needle jet and jet needle control from 15% to 80% of the throttle opening and the main jet controls 60% to 100%. This means that when you open the throttle about one eighth of the way open, all of the gas/air mixture going into your engine is controlled by the idle jet. As you can see, the different jets over lap the operating range of each other. That is, the jet needle starts to effect things before the effect of the idle jet ends. This is something to remember when working on carbs... everything is interconnected. Change one thing and it will effect other things.
OK, let's go over the different systems in the carb and see what they do.
Posted on Apr 16, 2010
SOURCE: I'm planning on purchasing a
there is only 1 vin on the bike, if your planning on registering it your gonna need it. The only other way would be to locate the frame number and have a kawi dealer cross reference for a vin, but being 6 years old, might not be able to. cant the owner just get it off his registration for you ? aslo, becarefull of receiving stolen property, sounds like an issue to me.
Posted on Mar 19, 2011
Tips for a great answer:
Nov 20, 2017 | kawasaki Motorcycles
Sep 19, 2017 | kawasaki Motorcycles
Sep 19, 2017 | 1998 Two Brothers-2002 Kawasaki ZX-6R /...
May 09, 2016 | 1997 kawasaki ZX-6R Ninja
Apr 26, 2015 | kawasaki Motorcycles
Feb 05, 2015 | kawasaki Motorcycles
Jan 30, 2011 | kawasaki ZX-6R Motorcycles
Jun 13, 2010 | 1995 kawasaki ZX-6R Ninja
Apr 04, 2010 | 1995 kawasaki ZX-6R Ninja
May 26, 2014 | 1995 kawasaki ZX-6R Ninja
108 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: