Question about Harley Davidson Motorcycles

1 Answer

Had a biketronics audio system installed, left hand controls do not work

This is a plug and play system. What can I do top get the control working again. The only change made after the audio installation was to change the wind shield. Any suggestion in fixing my problem for a 2009 HD FLHT

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Harley Davidson Master
  • 42,885 Answers

Hi Drop, take it back to the dealer and demand satisfaction politely and you want it fixed for free since you already paid big bucks for the practice repair. If they give you any static ask the store manager for the Motor Company's customer service phone number so you can ask them why your dealer won;t waranty their work in a timely manner. Good luck and have nice day.

Posted on Jun 23, 2015

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 190 Answers

SOURCE: lighted floor board inserts inop

was the Y connector used with resistor

if not need a resistor in the circuit to cut down current possible led's are dead an need to replace

here's a how to make your own led tree

Posted on Apr 06, 2009

  • 47 Answers

SOURCE: how do I change the oil and filter

the one to the front is the oil the one to the rear is the trans and the oil filter is a spin on - off at the front of the bike

Posted on Aug 22, 2009

  • 269 Answers

SOURCE: Rear Speakers and audio controls no longer work.

Remove your "new" heated gear harness, test functionality of audio. When installing the heated gear run new power and ground wires. Unless installing HD items and directed to use existing circuit. Good troubleshooting practice, if it nolonger works undo what you did then move forward after it works again. Hope this helps.

JP

Posted on Sep 16, 2009

ironcrossaud
  • 281 Answers

SOURCE: I am installing a CB to my 08 Street Glide.

Contact Iron Cross Audio (www.ironcrossaudio.com). They should have a wiring diagram

Posted on Sep 23, 2009

wd4ity
  • 4565 Answers

SOURCE: remove 2009 fxstb softail gas tank

I haven't worked on an '09 model but all the Softails I ever worked on had two tanks. To remove them, first remove the dash and any thing covering the "tank gap". There are three bolts on each tank half, two in the front of the tank and one at the rear. There is also two hoses that connect the two tanks to each other. One in front that is the fuel crossover. Make sure you drain as much fuel out of the tanks as possible before removing this line. Still there will be some gasoline spill out so don't be smoking while doing this job. The other hose is a vent hose at the top of the tanks under the dash. It just vents the left tank to the right one since the left tank gas cap does not have a vent built into it. If it did, gasoline would spill out when the tanks were full and you put the bike on the side stand. You may not have to remove both tanks to install your bars. I don't know where the handle bar wiring harness connects under the tanks.

Posted on Oct 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Snes no sound


Installation steps:
These steps work for Wii, Nintendo GameCube, Nintendo 64, and Super NES hookups.

Gently pull the yellow cable of the Stereo AV cable apart from the two Audio cables (red & white). Plug the yellow cable into the Video Input on the TV or VCR.
Locate an open set of Audio inputs (left & right) on your home stereo. Do NOT use inputs marked "Phono."
Plug the white cable into the Audio Left input on your home stereo. Plug the red cable into the Audio Right input on your home stereo.
Set the input select on the stereo system to match the label on the set of audio inputs. (For example, if you plugged the Audio cables into the AUX port, switch the stereo to AUX or "auxilliary."
Make sure the game is placed properly in the system.
Plug the controller(s) into the front of the Control Deck using the left most port for player one.
Plug the AC Adapter into the back of the system. Plug the other end into a wall outlet.
Turn the power on.
Turn on the TV or VCR and locate the input select. It's often called Input Select, AUX (auxilary), Line, Line In, Input, Source, Select, In, or EXT (external. Switch the input select to show the Nintendo game.
Note: If you are using a VCR, you will need to set the VCR's TV/VCR button to VCR. You can do this by putting a movie in the VCR, pressing play, then pressing stop.

The game image should now be displayed on the screen. You're ready to play.

Dec 31, 2012 | Nintendo Super NES Console

1 Answer

My n 64 has audio but no video


These steps work for Wii, Nintendo GameCube, Nintendo 64, and Super NES hookups.

Gently pull the yellow cable of the Stereo AV cable apart from the two Audio cables (red & white). Plug the yellow cable into the Video Input on the TV or VCR.
Locate an open set of Audio inputs (left & right) on your home stereo. Do NOT use inputs marked "Phono."
Plug the white cable into the Audio Left input on your home stereo. Plug the red cable into the Audio Right input on your home stereo.
Set the input select on the stereo system to match the label on the set of audio inputs. (For example, if you plugged the Audio cables into the AUX port, switch the stereo to AUX or "auxilliary."
Make sure the game is placed properly in the system.
Plug the controller(s) into the front of the Control Deck using the left most port for player one.
Plug the AC Adapter into the back of the system. Plug the other end into a wall outlet.
Turn the power on.
Turn on the TV or VCR and locate the input select. It's often called Input Select, AUX (auxilary), Line, Line In, Input, Source, Select, In, or EXT (external. Switch the input select to show the Nintendo game.
Note: If you are using a VCR, you will need to set the VCR's TV/VCR button to VCR. You can do this by putting a movie in the VCR, pressing play, then pressing stop.

The game image should now be displayed on the screen. You're ready to play.

Dec 25, 2012 | Nintendo 64 Console

1 Answer

No video or sound


External Speakers



Installation steps:
These steps work for Wii, Nintendo GameCube, Nintendo 64, and Super NES hookups.

Gently pull the yellow cable of the Stereo AV cable apart from the two Audio cables (red & white). Plug the yellow cable into the Video Input on the TV or VCR.
Locate an open set of Audio inputs (left & right) on your home stereo. Do NOT use inputs marked "Phono."
Plug the white cable into the Audio Left input on your home stereo. Plug the red cable into the Audio Right input on your home stereo.
Set the input select on the stereo system to match the label on the set of audio inputs. (For example, if you plugged the Audio cables into the AUX port, switch the stereo to AUX or "auxilliary."
Make sure the game is placed properly in the system.
Plug the controller(s) into the front of the Control Deck using the left most port for player one.
Plug the AC Adapter into the back of the system. Plug the other end into a wall outlet.
Turn the power on.
Turn on the TV or VCR and locate the input select. It's often called Input Select, AUX (auxilary), Line, Line In, Input, Source, Select, In, or EXT (external. Switch the input select to show the Nintendo game.
Note: If you are using a VCR, you will need to set the VCR's TV/VCR button to VCR. You can do this by putting a movie in the VCR, pressing play, then pressing stop.

The game image should now be displayed on the screen. You're ready to play.

Dec 27, 2011 | Nintendo Super NES Console

1 Answer

Ther is know audio and sound in to my computer.how can i fix it?


- Go to control panel in My Computer, then go to Sounds and Audio Devices. - Go to the tab labeled audio and where it says sound playback click volume and make sure you volume control is not muted. If it still doesn't play music make sure the plug from your speakers is plugged into the green plug in the back of your computer - Make sure also to plug it from an outlet if it uses electricity
If the above troubleshooting still didn't work, go to Control Panel, then System, find Device Manager. Click the Sound, video and game controller,then right-click the soundcard installed then click Properties. Check for the device status if it is working properly, otherwise if other message status is there, try to find a new driver on the net.



Mar 24, 2011 | Computers & Internet

1 Answer

Trying to hook up my nintendo 64 but there is no video or sound output??


External Speakers



Installation steps:
These steps work for Wii, Nintendo GameCube, Nintendo 64, and Super NES hookups.

Gently pull the yellow cable of the Stereo AV cable apart from the two Audio cables (red & white). Plug the yellow cable into the Video Input on the TV or VCR.
Locate an open set of Audio inputs (left & right) on your home stereo. Do NOT use inputs marked "Phono."
Plug the white cable into the Audio Left input on your home stereo. Plug the red cable into the Audio Right input on your home stereo.
Set the input select on the stereo system to match the label on the set of audio inputs. (For example, if you plugged the Audio cables into the AUX port, switch the stereo to AUX or "auxilliary."
Make sure the game is placed properly in the system.
Plug the controller(s) into the front of the Control Deck using the left most port for player one.
Plug the AC Adapter into the back of the system. Plug the other end into a wall outlet.
Turn the power on.
Turn on the TV or VCR and locate the input select. It's often called Input Select, AUX (auxilary), Line, Line In, Input, Source, Select, In, or EXT (external. Switch the input select to show the Nintendo game.
Note: If you are using a VCR, you will need to set the VCR's TV/VCR button to VCR. You can do this by putting a movie in the VCR, pressing play, then pressing stop.

The game image should now be displayed on the screen. You're ready to play.

Feb 10, 2011 | Nintendo 64 Console

1 Answer

I hooked up my n64 and everything is working perfectly, except it's telling me there's no controller plugged in...when there is. I've tried a different controller, playing with the wires, resetting, using...


Make sure you are using all licensed accessories with your system. Make sure both the controller is licensed and any accessories you are using with the controller (Rumble Pak, Controller Pak) are licensed as well. Unlicensed products may not be fully compatible with our systems.

Slide the Power Switch on the control deck to the OFF position and unplug the controller. Plug the controller back in, making sure the controller-plug is firmly inserted into socket one (on the left front ofthe control deck). Slide the power switch on the control deck to the ON position.

If possible, try another controller in the left-hand port. If you have a second controller, repeat Steps 1 through 3. If the trouble disappears, the first controller may need to be replaced. For information on locating replacements for older products, please click here.

Jan 21, 2011 | Nintendo 64 Console

1 Answer

Cant play sound it keeps asking for multimedia audio controller when i install audio driver it states RPC Server not found


It sounds like you have the wrong driver installed or there are more drivers that you need to install and update.

One way to ensure that you install the correct drivers is to go through the Device Manager and update your driver.

This is for a Windows XP system

To Update your drivers through Device Manager, pls do the following:

1. Attach your computer to the internet, make sure you can get on the internet by launching your browser, ie. Internet Explorer, Firefox, Safari
2. Navigate to Start/Control Panel, System
3. Choose the Hardware Tab and click Device Manager
4. See if there are yellow exclamation marks or question marks listed
5. Select them and right click on each one (you have to do this one by one until you see no more yellow exclamation marks or question marks)
6. Choose Update Driver
7. Follow the prompts to complete (usually by clicking ok to all the prompts)

This is for a Windows Vista or Windows 7 system
1. Connect your computer to the internet and ensure that you have internet connection by launching your browser and surfing to your favorite website.
2. Navigate Start/Control Panel/System
3. On the top left hand corner, click Device Manager
4. Do the same from 5-7 under the Windows XP directions up above.

Again, remember that sometimes drivers are related to something else on the system. Therefore you may need to update one or more drivers. This is the only way to ensure that you get everything.

Let me know how it works out and please don't forget to rate me.

Mar 19, 2010 | Compaq Evo D500 PC Desktop

1 Answer

Distortion when music play


click on start and right click on

computer.click on properties.on the left

hand top corner click on device

manager.here double click on sound video and game controller now right click on idt high definition audio codec and uninstall.after that close all the windows and retstart the system.everything should work fine.

Jan 08, 2010 | Computers & Internet

1 Answer

My speakers won't work


Hi! It seems that your problem is in your computer system setting. You have to install the audio device DRIVER and install it. After that, problem solve. Good luck, THANKS

May 06, 2009 | Audio Players & Recorders

9 Answers

No Sound... Multimedia Audio Controller Issue


i have a dell dimension 8100 no audio device the multimedia audio controllers has a yellow question mark ive try fixing but cant

May 09, 2008 | Dell Dimension 8100 PC Desktop

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4533 Answers

Mike

Level 3 Expert

4340 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...