Question about 2005 Harley Davidson FLHRS - FLHRSI Road King Custom

1 Answer

I have a 2005 Harley Road King Custom. With ignition switch on, I have horn, brake lights and instrument light. I don't hear fuel pump, turn signals don't work; headlight doesn't work and

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Harley Davidson Master
  • 41,660 Answers

Hi Mark, I would start by checking fuses first located behind the left side panel. Then check for continuity at your system/fuel pump relay also in that same general area, check the connection at the turn signal module and for continuity at the ignition switch and your high/low beam switch. This is assuming of course that your security alarm has been disabled. for more information on your question please visit the websites below and good luck:
Harley Davidson Wiring Diagrams and Schematics
Harley Diagnostic Codes 04 to Present

Posted on May 23, 2015

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
DJ_MAX1369
  • 119 Answers

SOURCE: fuel pump?

the fuel pump for your 2000 fuel injected road king is located in the fuel tank. you will have to remove the speedometer housing, by first removing the seat, then remove the one small screw near the seat that holds the speedometer housing in place, also remove the small screw at the front of the speedometer housing and lift the housing off the tank and disconnect the wiring that goes to the back of the speedometer. there is a large oval shaped gold in appearance plate on top of the fuel tank. this plate is what the fuel pump is mounted to.

Posted on Mar 31, 2009

tundrajet
  • 80 Answers

SOURCE: Speedo, turn signals, brake lights, horn stopped working. All else is fine.

Gap your plugs to 38 thou. Check all your bulbs (one burned out will affect the rest) Take a look at all your fuses and make sure they are all ok. Otherwise you are probably looking at a wiring short which will require trouble shooting of the elctrical system. Buy your self a service manual for your bike, this will help you a lot.

Posted on Jun 06, 2009

v2iper
  • 150 Answers

SOURCE: 1999 road king wont start

Its your fuel pump if you can't hear it. And its inside your tank. Not a hard fix if you have a book that tells you how to remove it. Alot of procedures to follow to get it right. And yes it does work off a relay.

Posted on Jun 14, 2009

wayneman01
  • 301 Answers

SOURCE: lights, turn signals, horn don't work

Look for a bad ground connection inside the headlight shell (or possibly elsewhere). The other thing that all of the items you mention that are working intermittently have in common is the ignition switch. With the switch 'on', check for battery voltage at the fuses for the headlight, turn signals, horn, etc. No voltage at the fuses likely means a bad ignition switch.

Posted on Nov 05, 2009

Testimonial: "quick response to my posted problem. don't know yet if that's the problem, but i've got a good place to start looking. thanks for the help."

  • 4088 Answers

SOURCE: Brake lights,turn signal and horn not working...

Check the wiring within the headlight shell--look for connectors that may be corroded or pulled loose. A little WD-40 will favor connection integrity when sprayed into the connectors, then coupling and uncoupling them several times. Hope this helps!

Posted on May 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuel reserve switch in a Harley road king


Hi Anonymous, if you are carburated there is a fuel valve on the bottom left side of fuel tank, if you are injected there is no valve or switch just a low fuel warning light. Have nice day.

Sep 18, 2013 | 2004 Harley Davidson FLHRS - FLHRSI Road...

1 Answer

Fuel gauge dont work and light is on on 2005 road king


Hi Anonymous, check your wiring and connections to the fuel gauge sending unit, then remove sending unit and manually raise and lower float arm to confirm function. Good luck.

Apr 13, 2013 | 2005 Harley Davidson FLHRS - FLHRSI Road...

1 Answer

Location of fuses 2007 road king


Hi Anonymous, 1992 and later Touring Models, fuel pump fuses and relays will be behind the right side panel, starter and ignition relays will be under the seat behind the battery, everything else will be behind the left side panel to access fuses pull back on the front two locking tabs and slide the cover up. Good luck and have nice day.

Sep 13, 2012 | 2007 Harley Davidson FLHR Road King

1 Answer

What is causing 2005 flhrsi road king custom speedometer to malfunction.


Hi,
Check first the FUSES, clean the terminals of the fuse and replace if already blown.
The intermitent location of the speedo means a trickle of voltage going into the system. The malfunction came when your charging the battery w/o removing the terminals.
Check and clean the harness connection.
Tell me if there is some more problem.

Nov 13, 2011 | 2005 Harley Davidson FLHRSI Road King...

1 Answer

I have a. 2007 road king custom and when I turn the ignition switch the fuel pump starts and when I start the bike it runs alittle and then the fuse blows ...put in new fuse and run the bike 10-30 miles...


Hi Wayzach, you could have a hard/dead short that should be easy to find generally they are the easiest. Time to get out your test light and connect it to the power side of the, circuit breaker, relay or the blown fuse receiver, start by tracking the out bound wire towards the ignition switch and beyond if necessary, when the test light quits lighting you are very close to your short. For a free wiring diagram please visit the website below. Good luck and have nice day. Harley Davidson Wiring Diagrams and Schematics

Jun 27, 2011 | 2007 Harley Davidson FLHRS Road King...

1 Answer

2000 road king. enginge light comes on at prestart but dont hear elec.fuel pump cycle. turn off and try again may cycle may not. off and on again finally cycles and can start then. whats the problem?


I would check for loose wires to either the fuel pump or the ignition switch. To repair either of these I would purchase a repair manual it is a mechanics best friend. I would not do any job on a bike without a repair manual.

Mar 03, 2011 | 2000 Harley Davidson FLHR-FLHRI Road king

Not finding what you are looking for?
2005 Harley Davidson FLHRS - FLHRSI Road King Custom Logo

428 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

Mike

Level 3 Expert

4339 Answers

yadayada
yadayada

Level 3 Expert

76070 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...