Question about 2007 Suzuki GSX-R 1000

1 Answer

How to fix the -C40 code

The F1 light comes on as soon as you start it and it runs like sounds like it is only hitting on two cylinders. WTF

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 216 Answers

C40
Idle speed control valve (ISC valve)...
Will your bike start without the clutch pulled in? Sometimes aftermarket levers do not actuate the pin as needed.
Wouldn't hurt to pull apart and clean all electrical connectors, inc the ones under the airbox.

Posted on Dec 09, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

F1 light flashing on my zx6r 2007


Have you replaced your exhurst system if you have did you put the O2 sensor back in as f1 error code is for this sensor and your CPU can not tell if the engine is running correctly and will shut the engine down when a gear is selected

Apr 06, 2014 | kawasaki ZX-6R Ninja Motorcycles

1 Answer

Bike back fires and the f1 light comes on on the cluster panel as well as bike dies


The F1 light is the FI fuel injection light. Your bike needs to be diagnosed and scanned by your dealer or trusted mechanic. There is a problem with your fuel system and a code has been registered, your bike won't start or run correctly until your mechanic has scanned, fixed and cleared the code.

Sep 11, 2011 | 2003 Honda VTX

2 Answers

When excelerating my car starts to **** until I get to a steady speed then it runs just fine. I've already replaced the filters but the garage still can't find anything wrong. Thanks for your help.


Is the check engine or service engine soon light illuminated? If so, what trouble codes were found.
Per your description it sounds as though you may have an engine missfire condition in from the ignition system.
Is this a 4 cylinder or 6 cylinder engine.
Good luck

Jan 24, 2011 | 2002 Pontiac Grand Am

2 Answers

My service engine soon light is on and now the car bucks when I step on the gas but it doesn't stall, it sounds like it is trying to though, where do think I should start.


The check engine light/service engine soon (yellow light) comes only when the engine computer control unit (called the PCM) senses a fault in the electronic controls of the engine and/or the emission system you will seldom feel the car engine run any different, there are about 200 possible faults that turn the light on, to know what has developed a problem you must have the system tested (this is the first step to ID the problem), this is called an OBD2 fault code test, Kragen and Autozone parts stores do this testing for free.

Nov 05, 2010 | 1992 Chevrolet Lumina

1 Answer

Kenmore Electric Range model 790 has F9 & F1 code error


Hi,
Before you go working too hard to get you oven to go into the self clean mode....check out this tip...


http://www.fixya.com/support/r3969401-self_cleaning_oven_problem

heatman101

" Wish I had read this first. I never would have used the self cleaning option. Thanks for the info!! "

Apr 20, 2010 | Kenmore 79012 / 79014 / 79019 Gas Kitchen...

1 Answer

F1 code coming up on my Oasis HE washer


YES! Serious problem...more annoying than anything else. Wait until your machine stops at the spin cycle and displays "F1" again. We just had a repair tech out today and received a quote of $384+ to fix/replace the circuit board. Kenmore & Sears are fully aware of this problem and have issued a recall on a model that is one digit off of the model I have yet they will not do anything about this even though it is the same problem. These machines are huge dogs!

Jan 15, 2010 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

Will not load past the "DELL" loading screen when you turn it on..wtf is wrong with it?!


hmm
ok try turning the computer on soon as you see any life at all hit f8.
or it maybe Shift f8 on yours. you may have to try both. but hit f8 you will see the advance menu screen. on advance menu screen select last known good configuration.
allow the computer to boot. if it gets to desk top perform a system restore to before the problem started. if not you will need to shut down again . boot the computer again as soon as you see any life . you will need to enter setup. you can do this by turning on computer soon as you see any life hit f1 or f2 or delete. it will be 1 of those keys that will get you into setup. in setup you will look to the upper left corner you will see where it says load default settings.
click on load defult settings. agree to it by clicking yes or by typing a Y.
now you will want to save your settings and exit the bios. the save and exit will also be there with load default button. click on save and exit.
allow system to boot.
Hope this was helpful.

Nov 17, 2009 | Dell Inspiron 1525 Notebook

1 Answer

INstalled a aftermarket Berringer clutch.


G'day Garrison , C40 is an idle air control(IAC) valve problem.Check all hoses to the valve.Check the valve wiring to the valve and to the ECU. ..Cheers.

May 14, 2009 | 2007 Suzuki GSX-R 1000

Not finding what you are looking for?
2007 Suzuki GSX-R 1000 Logo

295 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...