Question about 2007 Bajaj Pulsar 150
Hi, Kms_sajal for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix or parts inquiry. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.
Posted on Nov 18, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Your motorcycle has CDI (electronic) ignition. A complete tune up is a new stock sparkplug, changing the oil,(10w40 is standard), clean or replace thr air cleaner, lubricate the chain and control cables, and clean the carburetor and fuel line. Below is how to clean the carb and fuel line.
To clean the fuel line, remove the water trap bowl at the bottom of the petcock, (gas valve). Any water or trash in the bowl? Drain a cup of gas from the tank. Any water or trash in the cup? Dump it, clean it and re-mount it, ( not all bikes have a water trap bowl ).
Drain the carburetor. There should be a screw on the lower side of the carb float bowl. Remove the screw then replace it after the fuel drains. Turn the gas back on and wait a minute for the carb to fill with gas. Install a new stock spark plug and start the engine. If the bike doesn't start and run properly then shut off the gas and remove the carburetor from the engine.
Remove the float bowl and clean the entire carb with a spray carb cleaner from the auto parts store. Wear protective goggles to avoid getting spray in your eyes. Spray into all the little airways and fittings in the carb. Remove the two screws on the outside throat of the carb and spray into the screw holes as well.
< < READ CLOSELY > >
Be sure to put these two screws back in the same hole they came out of. IMPORTANT > do not tighten these two screws down. Only screw these in until they LIGHTLY seat. Now turn each screw one and one half turns outward. Put the rest of the carb back together, clean or replace the air filter and install the carb. Let the float bowl fill then start the engine. This process should get you back on the road.
Please rate this solution. Thanks!
Posted on Apr 01, 2009
Tips for a great answer:
Sep 07, 2014 | 2011 Bajaj Pulsar 150
Apr 23, 2014 | 2007 Bajaj Pulsar 150
Jan 10, 2014 | Bajaj Motorcycles
May 23, 2013 | 2011 Bajaj Pulsar 150
Aug 21, 2012 | Bajaj CT 100 Motorcycles
Mar 16, 2011 | Bajaj Chetak Motorcycles
Sep 17, 2010 | Bajaj Pulsar 180 Motorcycles
Mar 10, 2010 | 2007 Bajaj Discover DTS-I
Sep 12, 2009 | 2005 Bajaj Pulsar 150
42 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: