Question about 2003 Harley Davidson FXD Dyna Super Glide

1 Answer

I have a 1999 softtail how do i change the stator

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Harley Davidson Master
  • 448 Answers

Drain the primary fluid. Remove the outer primary cover. The stator is behind the compensating sprocket in the front of the inner primary. Increase the slack in the clutch cable at the adjuster. Lock the primary drive with the locking tool (may be purchased from Harley or Drag Specialties if you don't have one). Unbolt the primary chain adjuster from the inner primary. Remove the comp nut and nut holding the clutch basket on the trans mainshaft (this nut has right hand threads).Remove the primary drive as an assembly.Remove the rotor. It is held on magnetically. Unplug the voltage regulator from the stator. Remove the 4 bolts holding the stator to the engine case, and throw them away. You will need new stator bolts to install the new stator. Do not reuse the old ones. Remove the stator. Installation is the reverse of removal. Some models also require the removal of the inner primary in order to remove the stator. If this is required, replace all the seals in the inner primary while you have it off. A service manual will be a great help if you do this job yourself. Torque specs are rather high for reinstalling the primary drive, so you may want to consider having a shop do the job. Good luck!

Posted on Dec 07, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHEN CHANGING A STATOR DO YOU HAVE TO RE SET THE TIMMIMG ON A 2004 HERITAGE SOFTTAIL


Hi, Johnny any relation to Craig Breedlove? your timing is non-adjustable it is controlled by the ignition module and various engine sensors for changing the stator you will need your service/owners manual if you can not find the best tool you ever bought for your Harley, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at xlch@mail.com. Good luck and have a wonderful day.
Harley Davidson rotor and stator diy repair replacement ep21 eng Roma...
http://www.carlsalter.com/pdfs/Harley_Davidson_Softail%20Models_2007.pdf
http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
http://mybikemanuals.com/harley-davidson/2005-harley-davidson-owners-manuals
Instant Tech Relief To speak to me personally absolutely "FREE"

Jun 02, 2017 | 2004 Harley Davidson FLSTC - FLSTCI...

1 Answer

1998 heritage softtail battery going dead


Hi Anonymous, perform the following tests:
1. Fill acid type batteries to proper levels.
2. Charge battery overnight at 1-2 amps you need 12 volts or better after charging.
3. Make sure all connections are clean and tight especially the negative cable at both ends.
4. Hook up volt meter to battery and start engine, if meter falls below 9.5 v replace battery.
5. With engine running at 3600 RPM battery should read 14.3-14.7 volts if not continue tests.
6. Unplug voltage regulator from alternator at crankcase by front of primary cover.
7. To test voltage regulator go to: https://www.youtube.com/watch?v=F8EjV0IjW9Q
8. With ohm meter, one lead grounded, touch alternator pin meter should read infinity, if not replace stator.
9. With ohm meter, both leads touching alternator pins meter should read 0.1 to 0.2 ohms on 1989 and later models. 0.2 to 0.4 ohms 1988 and earlier models, if not replace stator.
10. With volt meter set on AC scale, both leads touching alternator pins meter should read
16 to 20 volts AC for every 1000 RPM'S 1989 and later and 19 to 26 volts AC for every 1000 RPMS. If not replace rotor. Good luck

Sep 08, 2012 | Harley Davidson FLSTC Heritage Softail...

1 Answer

Harly davidson heritage softtail


many things can cause this ,if you change your seating postion ( lean forward / move backwards does it go away?....

front forks loose at triple tree,
new front / rear tire more aggressive tread than before,
front wheel loose,
worn head bearings,
bent rim,
loose spokes if any,
wrong tire pressures,
loose handle bars
,some new addition to change the handling of the bike , rear seat rest etc,

Apr 30, 2010 | 2004 Harley Davidson FLSTC - FLSTCI...

1 Answer

I have a paucho rigid frame and a 1980 shovelhead 1340 cc motor with kick and electric starter and i need a wiring diagram also it has a heritage softtail forks and lights and switches


The shop manual for shovels has a diagram in it .They're all the same except for xtra lights your bike probably doesn't have. Get the heritage book too for the front end wiring.Both have alt./stator/reg. so have at it.

Mar 23, 2010 | 2000 Harley Davidson FLSTC Heritage...

1 Answer

1991 Softtail Lights stopped working


try changing bulbs wiggle around see if comes on if not pull the assy from between the tanks and check wiring sometimes the sockets the bulbs sit in take a dump if youre inclined replace the sockets if not JP cycles and buy a new one with all new components

Jul 22, 2009 | Harley Davidson FLSTC Heritage Softail...

3 Answers

I have a 1992 softtail fxst and the battery is not being recharged after I ride it for a while it just dies, its a new battery so when I use jumper cables it will start but dies after a while...help


You need to use an ohmeter and test the stator to see if it is grounded out. Pull the plug going to the regulator and put one lead to a good ground and then poke the other lead in each of the connector holes to the stator. do this with the motor not running. If you have continutity on either wire to ground then the stator is shorted/grounded and must be replaced. If everything is ok there then the regulator is bad.

Jun 05, 2009 | 2000 Harley Davidson FLSTC Heritage...

Not finding what you are looking for?
2003 Harley Davidson FXD Dyna Super Glide Logo

300 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...