Question about 2002 kawasaki EL 125 Eliminator

Open Question

2002 KAWASAKI ELIMINATOR 125 NO START. CLICKS WHEN PUSHING THE STARTER BUTTONE

WHEN PUSHING STARTING BUTTON, CLICKS WHERE THE BATTERY CABLES GO FROM BATTERY TO STARTER. THERE IS A 30 AMP FUSE HERE, JUST CLICKS

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2336 Answers

SOURCE: Oil capacity

According to the Owner's Manual for my 2001 Eliminator the total capacity is 1.4 liters which is 1.5 quarts. Should to the same for most year models.

Posted on Nov 10, 2008

Ad
  • 16 Answers

SOURCE: 1993 Kawasaki Won't Start

sounds like the sylonoid

Posted on Mar 04, 2009

DickCanFixIt
  • 948 Answers

SOURCE: 2001 kaw Vulcan 1500 will not start. new battery, starter relay

Check continuity at the kill switch? sidestand switch? Either could be malfunctioning. What does your manual tell you about the starter relay circuit?

Posted on Jul 20, 2009

czaa
  • 4536 Answers

SOURCE: Starter clutch trouble on Kawasaki Eliminator ZL600

please dont unless your a pro or from japan the clutch is on the rite or left on engine under a face plate-get a manual or bring to cycle salvage yard-theyre oldschool-it maybe just a simple adjust 0n cable or unit

Posted on Jul 30, 2009

Benimur
  • 6966 Answers

SOURCE: kawasaki eliminator dont star any noise starter

Hi and welcome to FixYa,

Initially, if the problem is that the starter motor will not turn when the start button is pressed, determine if there is a clicking sound:

  • if there is, then the starter relay is activating but not engaging. To confirm, temporarily short the 2 big terminals of the starter relay. The starter motor should turn;
  • to locate the starter relay, follow the battery's + cable;
  • if starter motor will not turn even when the relay's terminals are jumped, the faulty starter motor most likely the carbon brushes and/or the commutator segments;
  • if the starter motor spins when terminals jumped, then the starter relay is faulty;
  • if there is no clicking sound, try with the clutch lever pulled in and/or the side stand folded up;
  • check the neutral switch / light.
Postback results of above tests.

Good luck and thank you for asking FixYa.

Posted on Dec 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

'02 Vulcan 750, no power when key is turned on. Fully charged battery, heard a pop and saw a flash from the right side cover when I engaged the starter button. No burnt wires, checked with volt meter


Hi, Jay before testing any electrical component in the Starting System it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
4. Bank angle sensor needs a reset or is faulty.
5. FOB battery low or dead.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand, clutch, neutral safety switch.
9. Security alarm needs a reset.
10. Starter relay, solenoid, starter motor or circuit wiring faulty.
11. Starter armature or field coils have failed.
12. Main fuse or circuit breaker may be blown or faulty.
13. Faulty ignition relay.
14. The electric starter is working but starter clutch has failed.
15. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
No power when switch is turned on
No Power to Start Button
Kawasaki VN 750 Service Manual
OEM Parts for Kawasaki
2002 Kawasaki Vulcan 750 Owner Manual

Aug 22, 2017 | 2002 kawasaki VN 750 Vulcan

1 Answer

1986 Kawasaki voyager xii stopped for gas then push start button has nothing push starts up


Hi, Steve and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Bank angle sensor tripped and ignition/light key switch not cycled to the "OFF" position and then back to the "ON" position.
5. Faulty starter button/switch.
6. Faulty kickstand or clutch pull in switch/sensor.
7. Security alarm needs a reset.
8. Starter control circuit, relay, or solenoid faulty.
9. Main fuse or circuit breaker may be blown or faulty.
10. Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
American Voyager Association
American Voyager Association
Thread Starting problem
Kawasaki Voyager XII Service Manual Page 3

May 18, 2016 | kawasaki Motorcycles

1 Answer

2001 Kawasaki Eliminator 125 how do you remove the rotor?


Hi, Cheryl for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $ you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Kawasaki Eliminator 125 Service Manual
OEM Parts for Kawasaki
Download Manual 2002 Kawasaki Eliminator 125 Owner Manual
Kawasaki Eliminator 125 2001
Kawasaki Eliminator

Jun 18, 2015 | 2001 kawasaki EL 125 Eliminator

1 Answer

Why won't it start? I Put in a new battery, but it won't start without a jump


There's a bad connection someplace. Check all connections, clean with contact cleaner, tighten if possible. Check starter switch, especially if you park outdoors.

Jul 10, 2014 | 2002 kawasaki EL 125 Eliminator

1 Answer

I have a 2002 Eliminator 125. It only wants to start after the starter is "tapped" a few times. We have a new battery and relay switch.. I'm wondering if it is the starter motor. Is there...


if u are tapping the starter and it starts sometimes its the starter motor replase it as the bushes are gone inside also your cellenoid is attached to the battery leed so not hard to find round with 2 wires cuming off folloe the red leed from starter motor nearly all 125 ellenoids are the same but sounds like the starter motor also check the earth is good take off and clean with emery cloth ans sand paper

Jul 28, 2011 | 2002 kawasaki EL 125 Eliminator

1 Answer

Bought new battery bc i havent rode in a month or so i hok the new battery up and everything comes on and when i push the start button all i get is a click from the soleniod if i jump start it by rolling...


Follow the positive battery cable to the solenoid. Now jump the battery cable to the starter cable. If the starter works you need a new solenoid. If the starter does not work, try holding the starter button while tapping on the starer with a plastic hammer. If the starter works now you need new starter brushes. If you open up the starter and the coils are burnt or the armature is shorted replace the assembly.

Sep 09, 2010 | 2000 kawasaki ZX-12R

1 Answer

I charged the battery on my kawasaki zx12r & now it wont start! anybody have a clue why? it does not turn no noise when I push the start button, lights, horn everything else comes on. I am stationed in...


could be the starter solenod. you can find it by following the positive cable from the battery to the solenoid. try bridging the two posts with a pair of needle nose pliers. if it starts you now know your solenoid is bad. if it doesn't, could be your starter. check all wires clean and connected.

Jun 06, 2010 | 2002 kawasaki ZX-12R

1 Answer

Kawasaki eliminator dont star any noise starter, when im push star botton


Hi and welcome to FixYa,

Initially, if the problem is that the starter motor will not turn when the start button is pressed, determine if there is a clicking sound:
  • if there is, then the starter relay is activating but not engaging. To confirm, temporarily short the 2 big terminals of the starter relay. The starter motor should turn;
  • to locate the starter relay, follow the battery's + cable;
  • if starter motor will not turn even when the relay's terminals are jumped, the faulty starter motor most likely the carbon brushes and/or the commutator segments;
  • if the starter motor spins when terminals jumped, then the starter relay is faulty;
  • if there is no clicking sound, try with the clutch lever pulled in and/or the side stand folded up;
  • check the neutral switch / light.
Postback results of above tests.

Good luck and thank you for asking FixYa.

Dec 21, 2009 | 1985 kawasaki ZL 900 A1 Eliminator

1 Answer

Same exact problem as you,


Hi and welcome to FixYa,

On the "...light click..." and no start, initially:
  • externally charge the battery;
  • install and try again and start the bike:
  • if no click, try with the clutch lever pulled in and/or the sidestand folded up;
  • if there is click but will not start, follow the big cable from the battery's + terminal;
  • it would end in the starter relay;
  • press on the start button;
  • determine if the click is coming from the starter relay;
  • short the two big cables/terminals;
  • if the starter motor spins, then faulty starter relay;
  • if not, then fault starter motor, most likely, the carbon brushes.

Postback results of checks/tests.

Good luck and thank you for asking FixYa.

Jul 10, 2009 | 2002 kawasaki VN 800 Vulcan Classic

Not finding what you are looking for?
2002 kawasaki EL 125 Eliminator Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...