Question about 2005 Yamaha YZF-R1

2 Answers

2004 r1 it won't start need help

To make it short. Bike been sitting thru winter and i tried to start but no go. So i jump it thinkin batt is low and it starts right up. Ok, took batt to dealer had them charge back up and bought batt tender also to charge over night. Now next day thinkin it should be ok it still won't light up to start. Turn on key to on and no gauge light only neutral green lights come on and when i push start button just clicks no other sounds. Now batt is fully charge gots voltage. But not sure why gauges out. Does anyone have any idea what i got here? Do i need to check all fuses behind the fairing or just at battery point? thanks

Posted by on

  • Jay Hiet
    Jay Hiet Jan 13, 2009

    Ok, i took fairing off and check fuse box all is good. Key is turn and no gauge light on at all, just green neutral, some times ticking sound but not all the time. I clean batt connector put grease already. Batt voltage off is 14 or so. Where else I check?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Have you tried the red key in the ignition ?

Posted on Jan 12, 2009

  • tenbob3 Jan 13, 2009

    is the exup valve making a noise ? if its not it could be the immobleliser, did you recieve the spare red key with the bike, without that you could have a world of problems.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 716 Answers

Id Smack The Started With A Hammer Cause That Would Be Your Clicking Sound. But Yeah Id Start With The Fuses Other Wise.

Posted on Jan 12, 2009

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 R1 won't start just clicks


Hi, Anonymous it should be noted that in order to "PROPERLY" diagnosis any electric starter issue it is "IMPERATIVE" that you begin with a fully charged battery 12.5 volts or better and be able to pass a proper load test, and the usual suspects are:
1. Battery terminals have loose or corroded connections.
2. Battery cables faulty due corroded or broken internal wiring at the cable connector especially the "NEGATIVE" cable which needs to be checked at "BOTH" ends.
3. Battery voltage, 12.5 volts or better,to the main circuit breaker to the ignition switch to the security/ignition fuse to the TSM/TSSM module to the engine stop/run switch to the starter button to the starter relay to the green wire that connects to the starter solenoid has dropped more than 1/2 volt.
4. With a voltmeter connected to the battery, the ignition switch in the on position, the kill switch in the run position, the starter button depressed, starter engagement should not bring voltage below 8-9 volts.
If a lower voltage is produced a proper battery load test should be performed with a load tester to validate battery integrity or battery replacement.
5. Faulty starter relay, check continuity.
6. Faulty starter solenoid, check contact plate and shoes for excessive electrical erosion/etching, refurbish as necessary or invert contact plate and use the virgin backside. Check contact shoes for being loose. Replace solenoid if the negative function is still a final outcome.
7. Faulty starter, bench test starter with a 12-volt battery if negative function check, decontaminate and undercut armature commutator segments as necessary, check segments with an ohmmeter probe each one and the segment next to it for shorts. Have the armature tested with a growler and field coils, and brush plate with an ohm-meter for opens, shorts or grounds. Replace brushes if less than .438" It is generally cheaper to overhaul/refurbish a starter motor than buy a new one.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.r1-forum.com/forums/104-04-06-r1-mechanical-help/323828-battery-charged-bike-still-wont-start.html
Won start just clicks but can push start Jumping relay doesn start it
2004 2005 Yamaha YZF R1 Service Manual R1 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Jul 17, 2012 | 2004 Yamaha YZF-R1

1 Answer

2006 r1 wont start stoped and road end


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $10 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
R1 01 won start after storage
http://www.r6-forum.com/forums/46-general-discussions/81502-wont-start-after-long-winter.html
Yamaha YZF R1 Service Repair Workshop Manual 04 06 Download Manuals...
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Apr 07, 2012 | 2006 Yamaha YZF-R1

1 Answer

Have a1983 gs450L suzuki for a winter project. I got it to start after sitting for years. Took off mufflers and added straight pipes and put on airfilter pods plus went from 130 main jet to 140. Bike wont...


Go back to the 130 main jet. Be sure to check that both carb slides lift at the same moment. Also check to see if one carb is "driving" the other due to the idle screws not being balanced. Check the compression in both cylinders. It should be within 10% of each other. It is not likely that the bike has jumped time.

Sep 28, 2011 | 1983 Suzuki Gs 550 L

1 Answer

I have a 2004 R1.start it and it runs fine. when I ride it more than a few miles and turn it off it wont start like batterys died. l just let it sit for maybe an hour it starts right up. I put on charger...


Hi, Tom and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Tip over sensor needs a reset.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Starter control circuit, relay, or solenoid faulty.
10. Main fuse or circuit breaker may be blown or faulty.
11. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
http://www.r1-forum.com/forums/104-04-06-r1-mechanical-help/323828-battery-charged-bike-still-wont-start.html
99 R1 won start wondering about the diagnosis
2004 2005 Yamaha YZF R1 Service Manual R1 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Apr 13, 2011 | 2004 Yamaha YZF-R1

2 Answers

Hi, I own a 2005 R1 for a year now and about 2 or 3 months ago I felt that the battery maybe low, I tried to cherge it but it didn't help much. I bought a new battery today and after installing it the...


ur alternator or voltage regulator has issues-batt is not being charged--havum tested with a multimeter--inspect wiring 1st-may be loose or corroded

Sep 14, 2010 | 2007 Yamaha YZF-R1

1 Answer

Tried to jump start my 2004 yzf r1 off the car and now I have no lights or anything come up on my screen


Hi, Anonymous if the car was running you may have blown some fuses or even fried your ECU for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
How do you jump start bike Yamaha R1 Forum YZF R1 Forums
https://answers.yahoo.com/question/index?qid=20080625112146AAIZGgI
2004 2005 Yamaha YZF R1 Service Manual R1 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

May 21, 2010 | Yamaha YZF-R1 Motorcycles

1 Answer

Yam r1 no go,put new batts in remotes,meta 357t,will not code in,can not turn imobb off to start bike up.(help)


got bike started,managed to recode remote just once,when bike stopped, would not restart alarm has spiked back,requires new alarm system.

Feb 15, 2010 | 2001 Yamaha YZF-R1

2 Answers

2001 dodge ram 1500 wont start


yur not supposed to and no yu dont need to reset them to the best of my knowledge my truck a 97 dodge ram 2500 v8 sat for like 8 months dead battery and had no problems but yes disconecting negative will remove power from the computer message me back with any questions

Jul 02, 2009 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

Location of the fuse box on a 2006 victory vegas jackpot


i had the same problem last winter. my problem was the bat. had power but not enough to open the injectors. might want to take a look at that. jump the bike and try to start it.

Mar 13, 2009 | 2006 Victory Vegas Jackpot

Not finding what you are looking for?
2005 Yamaha YZF-R1 Logo

335 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

278 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

D. E. Hev

Level 3 Expert

1167 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...