Question about 2008 Harley Davidson FXD Dyna Super Glide
I took the horn & hi-beam switches off my bike. I cut the wires on those switches, I did this with my bike running, headlight on, to know if I cut a wire and if it would affect anything. it did not effect anything. now my headlight does not work, the fuse is ok, don't know what a burned out hedalight looks like.
Depending on the wires you cut wires from the headlamp switch you will have no light. You will have to join the yellow and blue wires to get the headlamp on. The blue wire will have 12 volts on it, the white is high beam and the yellow is dipped beam.
Posted on Mar 29, 2015
The bulb glass itself usually looks burned with black and/or white distortions on the glass. the bulbs are cheap enough, just replace it with a new one. if it's not it, you'll still have a back up on hand.
Posted on Oct 19, 2014
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1998 harley davidson heratige
i sugest doing it off of your ignition with a relay use a small amount of power to controle a bigger amount that way you wont have any problems with your lights some times when you do it off your lights it can make them not work by blowing the fuse because now you are trying to pull more volts and amps
Posted on Jun 04, 2009
Depends.u have about 3 or 4 inches of play......if your gonna switch to ape hangers ,there will be alot of wiring to do ....... if the dimensions are close to what u got .......then it wont be required
Posted on Aug 07, 2009
I know this sounds aomewhat general, however please give the following some thought:
Check your relays, if you have an aftermarket horn you may have a different relay. To troubleshoot unplug your headlight, unplug your horn, etc.. Turn your ignition switch to accessory only. See if the fuse pops. If it does unplug whatever added accessories you may have still have plugged in. Once you can get the fuse to stop popping, turn the ignition switch to on. Then one at a time plug you accessory, headlight, etc. back in. When you find what pops the fuse, unplug that item, start plugging in the other items, if the fuse has not popped you have potentially isolated the circuit causing the issue. Now check the wiring for loose connections, bad ground, and CHECK the relay if that item has one. Hope this helps,
Posted on Aug 19, 2009
Tips for a great answer:
Mar 27, 2014 | 2003 Harley Davidson FXD Dyna Super Glide
Sep 15, 2013 | 2008 Harley Davidson FXD Dyna Super Glide
Jun 28, 2013 | Motorcycles
Jun 22, 2013 | 2000 Harley Davidson FXD Dyna Super Glide
Dec 04, 2012 | 2004 Harley Davidson FXD - FXDI Dyna Super...
Sep 07, 2012 | Yamaha Virago 250 Motorcycles
Jul 15, 2012 | 2001 Honda VT 1100 C2 Shadow Sabre
May 15, 2010 | 2002 Harley Davidson FXD Dyna Super Glide
May 05, 2010 | 2003 Ford Crown Victoria
Nov 26, 2009 | 2002 Yamaha YZF-R6
113 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: