Question about Jincheng Rune Motorcycles

Open Question

No spark for jinsheng moped

Getting no spark at spark plug

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

isaid
  • 302 Answers

SOURCE: how to get my moped to start ? I've already

IF IT HAS BEEN SITTING FOR LONGER THAN A MONTH OR SO THE FUEL COULD HAVE GONE BAD DRAIN FUEL AND PUT NEW GAS IN IT , THEN DRAIN CARB BUY LOOSTENING SCREW ON BASE UNTIL FUEL BECOMES CLEAR

Posted on Oct 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My aprilia sr gt 1 50cc moped wont start?


DO YOU HAVE GAS? DO YOU HAVE POWER?
TAKE OUT THE SPARK PLUG, RECONNECT IT TO THE CABLE AND LAY IT ON THE MOTOR, NOW TRY TO START THE MOTOR WATCHING IF YOU CAN SEE A SPARK. NO SPARK NO POWER. YOU MAY FIND OUT THAT POWER IS GETTING TO THE STARTER COIL BUT NOT TO THE PLUG. REPLACE THE COIL.

Jun 20, 2015 | Aprilia Motorcycles

1 Answer

MY MOPED STOPPED


check /change the spark plug.

Aug 10, 2014 | RTO 50cc Moped Scooter

1 Answer

What spark plug do i need for a Yamaha M S 50 moped 1986


take out the old plug and the details are on the ceramic bit
the new plug will be gapped correctly.
brand doesn't matter

Jul 24, 2014 | RTO 50cc Moped Scooter

2 Answers

I have no spark on my 1969 Honda 90 passport moped any help??


I believe that this moped has a magnito and it is probably not functioning

Jun 09, 2014 | Cars & Trucks

2 Answers

Moped


the gapping is standard you can u a match book and if it slides between the gap easy it is fine if it wont goo in the gap it needs to be gapped more if there is alot of space between it, it needs to be closed up some.

Apr 21, 2010 | RTO 50cc Classic Gas Moped Scooter

1 Answer

My moped does not creat a spark with the spark plugs. how do i get it to spark?


Make shure the wires on the coil are not reversed
Also the end of the spark plue wire are prone to being loose go to your local auto parts store and get a new spark plug end for it when you install it rememer to cut a quarter inch off to get full access of the center of the spark plug wire then put the new end on it .it has happen to me with the same problem.
Try a differnt spark plug
One Other Though put a meter on the witers comming from the stator make shure you are getting 13.5 voats frome it (If you Have A Battery)

Best Reguards

Larry

Nov 07, 2009 | RTO 50cc Moped Scooter

1 Answer

2007 50cc moped.wire with the fuse getting hot


Check the whole system over an see if evory thing is fastened securley,make shure that no two wires are toucing!

Oct 15, 2009 | RTO 50cc Moped Scooter

1 Answer

Peugeot jet force 50 engine cuts out on overrun


when the engine dies pull out the spark plug and earth the plug on the metal part and turn it over dont hold the spark plug as you will get a shock if the plug sparks you know the ignition system is working.if you have no spark do a compresion test to see if there is a problem with the engine.if that ok you will have a fuel problem make sure the breather on the fuel tank isn blocked or trapped.

Oct 08, 2009 | 1976 Honda CB 100

2 Answers

Moped wont start


is there a spark a decent one if not try changing plugs if still no spark it could only be the cdi,coil and magneto get back to me buddy

Sep 13, 2009 | 2005 Tomos Se 125 F

1 Answer

Xg wg50 wireing diagram


Hi, Xsprodb if you have a CKP sensor it needs compression to send the correct signal to the ICM/ECM, make sure both spark plugs are in heads and use a grounded third plug to check for spark or hold spark plug cable close to spark plug in the head. If still not getting spark the usual suspects are:
1. Fouled spark plugs.
2. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
3. Loose connection at ignition coil or plug between ignition sensor and module.
4. Spark plug cables in bad condition, shorting / leaking, spark plug cable connections loose.
5. Faulty ignition coil or ignition / electronic module
6. Failed CKP, CMP, or BAS sensor.
7. Faulty ignition switch.
8. Security alarm failing to disarm needs reset
For more information about your issue, please visit the websites below. Good luck and have a nice day.
Chinese scooter no spark kit
My scooter has no spark how to fix gy6 chinese scooter 139qmb qmb139 50cc...
The Ultimate GY6 Starter Ignition Troubleshooting Tutorial Benelli service manuals page 4
2008 Benelli BX505 Enduro


Mar 30, 2009 | 2008 Benelli Bx 505

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jincheng Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

74914 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Jincheng Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...