Question about Motorcycles

1 Answer

No fuel in fueline...will fire but won't idle

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Motorcycles Master
  • 8,404 Answers

No fuel in the fuel line = fuel valve off or no fuel or serious clog somewhere between the tank and the observation point. Fix this first. Will not idle = dirty carb or out of adjustment (not likely) or poor quallity fuel (very likely).

Posted on Dec 02, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rough idle on a 1995 cougar rx7 & stalls out loads


air sensor or fuel sensor it is mixing to rich

Aug 15, 2013 | Cars & Trucks

1 Answer

2007 flhtc won't idle


Hi Anonymous, try a fuel stabilizer. Good luck.

Apr 23, 2013 | Harley Davidson FLHTCUI Electra Glide...

2 Answers

My 5.9 dodge cummins diesel won't start, I've replaced the fuel lift pump, and the fuel filter, turns over. But will not start?


Most likely you just have air in the lines.Crack them open one at a time and bleed them with the fuel pump off and on till you get fuel.If it fires dont hit the throttle let it sit and idle and close the line.Does it fire up with a small whif of starting fluid?

Mar 17, 2013 | 1999 Dodge Ram

1 Answer

Sputtering Engin on 2000 Buick Lesabre


O2 Sensors only reads Oxygen Content in Exhaust
Converter,so forget that persons advice in the future

The O2 Sensor info is for adjusting fuel trim or injector
pulse timing,not your problem

You change front upstream O2 sensors at 100,000
miles, as preventative maintenance

Check Fuel Pressure at motor & pump maybe failing
as well,doesn't hold pressure thus takes too long to start

Clean the Air Idle Valve on throttle body & it won't shut off
at stops

Oct 12, 2012 | 2000 Buick LeSabre

1 Answer

Pw50 fires but won't stay running


Hi, Jj9871 and the usual suspects are:
1. Fuel cap or fuel tank is not venting properly.
2. Fuel filter clogged.
3. Fuel line pinched or kinked.
4. Float needle and seat sticking.
5. Float level too low.
6. Carburetor bowl vent line clogged/blocked/pinched.
7. Idle adjusting screw set too low.
8. Air/fuel mixture screw set too lean.
9. Idle port, transfer ports, slow air jet clogged.
10. Slow fuel jet clogged.
11. Faulty fuel pump.
For more information about your issue and valuable "Free" downloads that you will need please Click on blue links below. Good luck and have a wonderful day.
pw50 won start please help
My Son Has Yamaha Pw50 That Will Start But Won Stay Runn
https://books.google.com/books?id=ozV8-Aer4N8C&pg=PA84&dq=pw50+manual&hl=en&ei=TCS2TcbdJ4PW0QG0z9jmDw&sa=X&oi=book_result&ct=result&resnum=1&ved=0CGUQ6AEwAA#v=onepage&q=pw50%20manual&f=false
OEM parts for Yamaha
Yamaha PW50 Owner Manual

Apr 14, 2012 | 2004 Yamaha PW 50

1 Answer

1991 eagle talon will crank, but won't start up. 2 days ago I was driving home from work when i turned around in a parking lot and went to my parents house. about a half an hour there i needed to move...


That sounds like the fuel pump may have lost it's prime. Does it have fuel injection, or a carburetor on the engine? How much gas was in the tank while it was parked on an incline? Have you tried any starting fluid sprayed into the air intake hose, toward the engine? Warning! Don't use much starting fluid! Perhaps a one or two second burst, and have someone crank it immediately after you have stepped back at least 6 feet from the engine. If it fires, then it is definitely a fuel delivery problem! But it won't run long like that unless the fuel pump starts working again ... which is most likely when the engine is cold!

Apr 19, 2017 | 1991 Eagle Talon

1 Answer

I have a model 336 Husqvarna chainsaw and it won't start. Put fuel into open plug hole replug, then turn it over it fires until the fuel runs out & won't restart & has full tank, obviously...


There has to be a kink in your fuel line ,or some blockage. Dump the fuel out ,then disconnect the gas line and try to blow air through the line.

Sep 04, 2011 | Garden

1 Answer

Not firing on #4


hi mate check the coils there are a coil for each plug no 4 cylinder coil could be gone

Jul 07, 2009 | 1982 Honda CBX

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...