Question about Motorcycles

Open Question

Changing oil on my 2003 Suzuki marauder VZ800. How much oil do i put back in/

Let me know.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: Looking for an Owners Manual

Hi, not sure if this will help. Click the link and choose your model. All in PDF format and can be downloaded for free.... http://www.manualz.info/Manuals_pdf/SUZUKI/

Posted on Jan 15, 2009

Ad
  • 10 Answers

SOURCE: how does the tank come off on a 2001 suzuki vz800 marauder

first take off the seat
when the front seat is removed you will clearly see 2 10 mm bolts holding down the tank...
you must also disconnect the fuel lines at the fuel shut off switch, i plug them with golf tees
perfect fit.

Posted on May 15, 2009

  • 39 Answers

SOURCE: How many quarts of oil does my 2001 VZ800 Suzuki Marauder require

the bike should be straight up and down and the oli level should be in the middle of the glass you bike should take around 4 qts

Posted on May 15, 2009

pugwash814
  • 377 Answers

SOURCE: I need to know the oil capacity of the front

FORK OIL
• Place the front fork vertically without spring.
• Compress it fully.
• Pour specified front fork oil up to the top level of the outer
tube.
Capacity (each leg): 490 ml (16.6/17.3 US/lmp oz)
99000-99044-L01: SUZUKI FORK OIL L01
or an equivalent fork oil
• Move the inner rod slowly with the special tool ten times and
more until no more bubbles come out from the oil.
09940-52841: Inner rod holder
NOTE:
Refill front fork oil up to the top of the outer tube so that bubbles
are visible while bleeding air.
• Refill specified front fork oil up to the top level of the outer
tube again. Move the outer tube up and down several strokes
until no more bubbles come out from the oil.
• Keep the front fork vertically and wait 5 – 6 minutes.
NOTE:
* Always keep oil level over the cartridge top end, or air may
enter the cartridge during this procedure.
* Take extreme care so as to pump out air completely.
• Hold the front fork vertically and adjust fork oil level with the
special tool.
NOTE:
When adjusting the fork oil level, compress the outer tube fully
without the fork spring.
Fork oil level: 153 mm (6.02 in)
09943-74111: Front fork oil level gauge

Posted on Dec 20, 2009

dmsr63
  • 2050 Answers

SOURCE: Gas leake from Air vent

If you mean that fuel runs out of one of the vent lines, note that one of those lines is for overflow from the carb bowl. If this is what is happening, you might have corrosion or dirt making your float needle stick, and overflow fuel to that carb. It needs to be cleaned out by removing the bowl, float and float needle.

Posted on Sep 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 Suzuki VZ 800 Marauder running on one cylinder


Hi, Michelle you need "FIVE" things in order for a cylinder to run properly:
1. FUEL: in order to validate your not getting fuel spray some starting fluid into the air cleaner and hit the starter button, if it fires up and runs for a few seconds then you know you have a fuel delivery issue. Multi carb banks should be bench "SYNC"
2. SPARK: remove the spark plug and with it connected to the spark plug cable ground the threads to something metal you should see a bluish white spark if not you have a faulty spark plug, spark plug cable, ignition coil, condenser, CKP, ECM, sensor or the wiring in between.
3. COMPRESSION: you must have at least 80-100 PSI for most bikes, multi-cylinder engines should be within 10-15% of each other if not perform a leak down test you may have a burnt or bent valve or hole in the piston or broken rings.
4. CAM TIMING: confirm your timing marks are aligned to see if the cam chain or adjuster are worn out and the chain has skipped a couple teeth.
5. IGNITION TIMING: on older bikes check to see if your points have not closed up, timing plate has not become loose and confirm with a timing light for proper retard and advance functions, on newer bikes where timing is controlled by an ECM and is nonadjustable check you CKP, TPS, MAP, O2, sensor or its counterpart for integrity.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
mis firing VZ800
Vz800 97 only runs on one cylinder possible broken wire
2000 VZ800 marauder 800 Front cylinder not getting fuel
Suzuki 1997 VZ800 Service Manual
OEM parts for Suzuki
http://mybikemanuals.com/suzuki

Aug 12, 2017 | 1998 Suzuki VZ 800 Marauder

1 Answer

Is there normaly oil in flywheel side suzuki marauder 1999mod


Hi, Appen behind the right side cover there will be an oil bath, behind the left side cover there may be less than 1 oz. of oil, sorry you can't find the first and best tool you ever bought for your Suzuki despair, not for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have a nice day. OEM parts for Suzuki
Service Manuals
http://pt.notices-pdf.com/marauder-800-manual-pdf.html
Suzuki VZ800 Marauder

Mar 07, 2016 | Suzuki Motorcycles

1 Answer

2000 suzuki marauder vz800 Changing rings in head need to know the foot pound pressure on 14mm head bolt and on 10mm head bolt?


Hi Jennifer, I am sorry you can't find the first and best tool you ever bought for your Suzuki but despair not for a mere $10 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
https://www.tradebit.com/filesharing.php/search/0/2000+suzuki+marauder+vz800

Aug 30, 2015 | Suzuki Motorcycles

1 Answer

How many quarts does a 2003 Suzuki Marauder 800 use


  1. Suzuki VZ800 Marauder - Motorcycle Specs

    www.motorcyclespecs.co.za/model/suzu/suzuki_vz800_97.htm Suzuki VZ 800 Marauder. Year. 1997. Engine. Four stroke, 45°V-Twin, SOHC, 4 valves per cylinder. Capacity. 805 cc / 49.1 cu in. Bore x Stroke, 83 x 74.4 mm.

Jun 19, 2015 | 2003 Suzuki VZ 800 Marauder

1 Answer

Wiring diagram schematic


http://www.cmsnl.com/suzuki-vz800-marauder-1997-2003-usa_model16330/partslist/

http://www.wiringdiagrams21.com/2012/07/03/suzuki-marauder-vz800-starter-system-circuit

Aug 28, 2012 | 1997 Suzuki VZ 800 Marauder

1 Answer

Torque specs on a suzuki vz800 head bolts


2000 suzuki marauder vz800

Changing rings in head need to know the foot pound pressure on 14mm head bolt and on 10mm head bolt?

Jul 23, 2012 | 2000 Suzuki VZ 800 Marauder

1 Answer

1997 Suzuki Marauder vz800 stalls


Hi, Abgurkins and the usual suspects are:
1. Idle circuit and transfer ports clogged.
2. Air fuel mixture adjustment too lean.
3. Pilot jet clogged.
4. Faulty accelerator pump.
5. Float level too low.
6. Float bowl contaminated old fuel, water, dirt, rust, etc.
7. Float bowl vent or overflow tube clogged.
8. Fuel flow to carburetor restricted.
9. Intake manifold leak.
10. The gas cap is not venting properly or fuel tank venting system blocked.
11. Vacuum line from intake manifold to petcock broken, cracked, or not attached, carburetor vent line plugged.
12. Needle and seat stuck closed in the float bowl.
13. Multi carburetors not in sync.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
97 Marauder VZ800 Not running right
Suzuki VZ800 engine dies when it gets warm Biker ie Forums
Suzuki 1997 VZ800 Service Manual
OEM parts for Suzuki
http://mybikemanuals.com/suzuki

Jun 30, 2017 | 1999 Suzuki VZ 800 Marauder

1 Answer

How do you check the oil level in my 2002 Suzuki VZ800 Marauder?.


To check the oil level, look at the site glass at the bottom of the motor

ednelson.jpg

Nov 06, 2010 | 2002 Suzuki VZ 800 Marauder

2 Answers

How many quarts of oil does my 2001 VZ800 Suzuki Marauder require


the bike should be straight up and down and the oli level should be in the middle of the glass you bike should take around 4 qts

May 15, 2009 | 2001 Suzuki VZ 800 Marauder

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4525 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...