Question about 2005 Yamaha XT 125 R
Iv got a new cable but cant seem to move the peice inside the carb
Hi, James for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Yamaha XT 125R 2005 Service Information
OEM parts for Yamaha
Yamaha xt 125 service manual
throttle cable replacement xt125x
How to replace the choke cable on yamaha xt125r Google Search
Posted on Feb 04, 2017
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The problems with a plunger style choke happen when the rubber on the bottom becomes deformed and does not seal or the spring does not push the plunger down hard enough, or the cap breaks so the plunger is not pushed down hard enough. If you put your finger over the hole and the bike runs properly your bike is running on choke. You have to block the hole deep inside the carb to shut off the choke. I assume the original problem was that the bike would not idle .If this is the case, take the carb apart remove the slow jet and clean the jet and the carb body out so fuel will flow at idle. This should fix your no idle problem.
Posted on Jun 29, 2010
Testimonial: "Thanks for the info. The original problem was the bike would idle okay, but stall as soon as gas was applied, I suspected a gas flow problem. I shotgunned a bunch of things including new petcock value filter in tank, taking carb off and cleaning jets, float bowl, and various orifices, replaced intake manifold (thought it could be a vacuum leak from some cracks seen), plus some other things I'm probably forgetting. Each change seemed to fix problem for a while, but it would always return (problem was always intermittent). Recently I noticed just moving the choke cable (without changing choke setting) was causing bike idle to change, then it died hard and would not start again after I fiddled with cable a bit - tried ether, etc. Since it fired right up after taking choke cable off I ordered a new one, still waiting for it, hopefully that'll fix it. I couldn't find anyway to adjust choke cable though manual debug section claims it can mis-adjusted. If this still fails I'll probably take the carb off again and try cleaning again. Been an intermittent thorn in my side for a while now. Thanks for the suggestions!! "
Tips for a great answer:
Feb 27, 2016 | Motorcycles
Nov 30, 2012 | 2005 Yamaha XT 125 R
Oct 24, 2012 | Motorcycles
Jun 26, 2010 | 2002 Yamaha Xv 250 Virago S
May 06, 2010 | Mtd LAWN MOWER PART # 903-0382 AXLE...
Sep 09, 2009 | Boating
Apr 17, 2009 | 2003 Honda CB 250 Nighthawk
Dec 16, 2008 | 1982 Suzuki GSX 400 FS impulse
60 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: