Question about 1998 Honda CBR 600 F(3)W
I have a cbr 600 f3 that has poor acceleration in 2nd and all the other gears under heavy acceleration the bike bogs down and the wants to die@
Posted by Anonymous on
Hi, Anonymous engine "BOG" is mainly caused by a rich air and lean fuel condition but it can also be caused by a lean air and rich fuel condition this situation rarely occurs and is only caused by the misinformed weekend warrior that owns a toolbox.
The more you open your throttle the more vacuum you are creating in your carburetor venturi and your intake manifold. When you are operating at higher RPM any unmetered air that leaks into your system can become more obvious.
Unmetered air is air that is getting into your system after the fuel has been delivered. If you have unmetered air getting into your system between the butterfly/slide of the carburetor and the cylinder head this will create a lean condition.
All of the rubber components of the fuel system like vacuum hoses and intake manifold that you mount the carburetor to are made of rubber. If none of these components have been changed they are more than likely highly degraded and probably cracked in places to allow unwanted-unmetered-contaminated air into the combustion chamber. Check all of your vacuum lines and vacuum plugs for carburetor synchronization. The vacuum plugs are in the head just after the rubber intake manifolds. The petcock has a vacuum line as well as part of the emission system.
1. Check the intake manifold for fissures.
2. Ensure the bands used to tighten the manifolds down on the intake are secure and have not bound up the manifold.
3. Make sure air box fittings are not warped and fit completely over the carburetor.
Your airbox is metering air and is the first step in a process of consuming air and fuel. The system requires the resistance of the air filter in order to get the proper vacuum to "SUCK" the fuel out of the float bowl and create the proper venturi effect.
Improper mounting and sealing of the airbox will create a small lean effect. This might seem like no big deal but you are inviting dust and debris in your engine that is doing slow damage by not having proper fitment. Fix it so you know it's not contributing to your issue. Pick the low-hanging fruit first.
Do not go and start adjusting anything at this point. It ran fine before. There is something wrong with the assembly or a component. Do not adjust your floats. Get it back to where it was. The moment you start tweaking everything is the moment you lose OEM settings which are a must-have for fine-tuning and maximum performance.
Fine-tuning your carburetor and multi carb syncing come at the very end following the proper procedure established by the Carburetor Gods.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
98 F3 bogging down under load CBR Forum Enthusiast forums for Honda CBR...
96 CBR600 F3 engine bogs out spark
1995 1998 CBR600F3 Repair Manual Download Manuals Technical $15
Honda CBR600RR 2007 Owner Manual
Posted on Nov 03, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: cbr 600 f3 will not start
wow, 7 years without use! try to check if the fuel pump motor is still working... also check the fuel lines if its clogged.. I hope you get your bike up and running again... feel that adrenaline rush when going 100+mph.. hehehe.. have a good one bro...
Posted on May 26, 2009
as far as i know there was never a 5 speed hurricane, my 87 is identical to your picture, mine has 6 speeds, mine also does more than 135, but mines got a k&n, Vance and hines pipes, and stage 3 jet kit, but never heard of one with 5 gears,
Posted on Sep 30, 2009
Tips for a great answer:
Apr 09, 2014 | 1997 Honda CBR 900 RR Fireblade
Jul 13, 2013 | Motorcycles
May 04, 2013 | Honda Motorcycles
Aug 12, 2017 | Honda CBR600F2 CBR600F3 CBR600 CBR 600 F2...
Feb 22, 2013 | 1988 GMC C2500
Mar 31, 2010 | 1995 Honda CBR 600 F(3)S
Mar 10, 2010 | 1997 Honda CBR 600 F(3)V
Oct 24, 2009 | 1996 Honda CBR 600 F(3)T
May 22, 2009 | 1996 Honda CBR 600 F(3)T
May 12, 2009 | 1998 Honda CBR 600 F(3)W
78 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: