Question about 2006 Ducati Multistrada 620 dark

Open Question

How do I remove the front seat (rider's seat) from the 620?

The owner's manual describes how to remove the passenger seat, - even though that's [pretty intuitive, - but there's no description provided for the removal of the rider's seat.

Posted by on

3 Suggested Answers

  • 2712 Answers

SOURCE: friction zone on 620 clutch

There are nice adjustable levers avaliable at your Ducati store. A good thing if you have smaller hands. Doesn't cure the sudden engagement, but maybe makes it easier to control.

Posted on Nov 20, 2008

  • 20 Answers

SOURCE: How to remove the passenger a rider seat on a 1999 Yamaha 650

1st take the backrest off if you have one then take the back bolt out of passenger seat should be a 10mm bolt then take the strap off that is between the two seats should be a 6mm allen screw, then then pull passenger seat off then take the passenger housing mount off 2 10mm bolts then you have got one more 10mm bolt that takes the drivers seat off take taht bolt out and lift seat off.

Posted on Aug 01, 2009

  • 88 Answers

SOURCE: where do I get the tab that slides into slot

the tab is part of the unit that holds the hold-on-strap to the bike. the two bolts used go through the hold-on-strap unit then into two holes at the rear of the front seat.
as for where you can get them..... dealer or scrap yard.
hope this helps.

Posted on Nov 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the MAX load when riding 2-up?


Hi, Anonymous sorry you can not find the first and best tool you ever bought for your Harley despair not, for a mere $10 you can download another one. For more information about your issue and valuable free downloads that you will need please visit the websites below, and for specific information or questions, you can reach me at xlch@mail.com. Good luck and have a nice day.
SHOCK LOAD TOTAL WEIGHT PRESSURE LB. KG PSI kPa Solo rider up to 150 0-68 0 0 Solo rider 150-200 68-91 0-10 0-69 Solo rider 200-250 91-113 5-15 35-103 Rider with passenger weight of up to 150 0-68 10-15 69-103 Rider with passenger weight of up to 200 0-91 20-25 138-172 Maximum GVWR see label 20-35 138-241 MODEL LOAD TIRE PRESSURE (COLD) FRONT REAR PSI kPa PSI kPa All Solo rider 36 248 36 248 Rider and passenger 36 248 40 276 Harley Davidson Manuals Mark Workshop
http://www.stcharlesharleydavidson.com/OEMpartfinder.htm
Owner Manuals Harley Davidson USA Harley Davidson FLHT Electra Glide Standard

Feb 28, 2016 | 2008 Harley Davidson FLHT Electra Glide...

1 Answer

Seat removal on 2009 harley softail deluxe


To install slide the retention nut over the tapered end of a cable tie strap so
that the larger O.D. of the nut rests on cable tie strap eyelet, then from the bottom of the rear fender feed the cable tie strap up through the fender hole, with the tab on the retention nut seated in the notch in the fender hole pull up on the cable tie strap to locate the nut snug up against the underside of the rear fender and then from the side opposite the tab i.e. from the rear of the fender slide the retention washer onto the nut which will lock it in place.

The FXST/FXSTB seat attaches with a single thumbscrew on the seat bracket. When installing a seat insert the tang at the front of the seat into the channel in the frame and install the single rear thumbscrew which Harley- Davidson has a special tool for which I have never even seen, pn HD-47190.

The FXSTC seat attaches with two fasteners through the sissy bar. When installing the seat the tang at the front of the seat is inserted into the channel in the frame and the two rear fasteners go through the and get tightened to 60-80 in-lbs (6.8-9.0Nm).

The FXCW/FXCWC Solo Seat is attached with 2 locating pins that for removal must be removed from their grommets by lifting the rear of the seat, then the seat is pulled to the rear to disengage the tongue from the frame. To install the seat put it on the frame, slide the seat forward until the tongue locks into the bracket, push the seat forward to align the two locating pins with their grommets and then push the seat down to engage the locating pins.
The FXCWC rider Seat is removed by tipping the seat up and towards the fuel tank, the two fasteners are removed and the seat is then taken off the bike. Do the reverse to install the seat and tighten the fasteners to 90-110 in-lbs (10.2-12.4 Nm).
The FXCWC Passenger Seat Support is removed by tipping the rider seat up and towards thefuel tank removing the two screws and washers from one pillion support, removing the pillion support and the rear seat pillion, then removing the remaining pillion support. To install it install one pillion support but do not tighten its fasteners, install the wave washer and bushing on each pillion support, install the pillion and the second pillion support and tighten all of the fasteners to an initial torque of 30-35 ft-lbs (40.7-47.5 Nm), then loosen the fasteners and then final tighten them to 38-42 ft-lbs(51.5-56.9 Nm), check the rider seat operation and then lower the rider seat into position and engage the locating pins into their
grommets.

To remove the FLSTN/FLSTF/FLST/FLSTC seat remove the passenger seat and seat mounting fasteners. When installing the seat insert the tang at the front of the seat into the channel in the frame and install the seat mounting nuts, then install the passenger seat.

To remove the FLSTSB seat remove the screw from the seat hinge at the front of the seat, raise the rear of the seat only slightly during removal or installation because pivoting the rear of the seat up too high can cause the nose of the seat to damage the leather trim panel on the fuel tank., to disengage the springs from the seat spring mounting pins and remove the seat. To install the FLSTB seat align the seat hinge with the mounting bracket on the frame, insert the screw into the seat hinge from the right side of the motorcycle and tighten it to 14-16 ft-lbs (19.0-21.7Nm), align the bushings on the seat springs with the mounting pins and push the rear of the seat down to engage the seat spring mounting pins. The seat position may be adjusted forward or rearward for rider comfort by removing the seat, removing the nut on the seat hinge, removing the bolts from the seat spring support bracket, (the seat hinge and seat spring support bracket must be installed in the same position in either a forward or a rearward configuration for the seat to fit properly on the motorcycle). To position seat forward install the hinge with the front tab in the slot, install the seat spring support bracket with the springs toward the rear of the seat. AND to position the seat rearward install the hinge with the rear tab in the slot and install the seat spring support bracket with the springs toward the front of the seat., THEN install the nut on the seat hinge and tighten it to 20-25 ft-lbs (27.1-33.9 Nm), install the screws for the seat spring support bracket and tighten them to 15-20 ft-lbs (20.3-27.1 Nm) and then install the seat.

May 18, 2014 | 2005 Harley Davidson XL 1200 R Sportster

1 Answer

Handlebars are bent


Instructions

YZF600R (1994 - 2007)
1

Insert the ignition key into the seat lock, located on the left side of the tail fairing above the left passenger foot peg. Twist the key clockwise to release the seat lock mechanism.
2

Grasp the rear portion of the seat and lift it off of the motorcycle's subframe. Pull the front of the seat away from the gas tank until the tab under the front of the seat is free of the subframe.

3

Hold the seat over the subframe to reinstall it. Hook the seat's tab under the cross-member below the base of the gas tank.
4

Push the seat forward slightly, then lower the rear of the seat onto the motorcycle's subframe.
5

Push down on the rear of the seat until the seat lock mechanism clicks into place. Remove the ignition key from the seat lock.
YZF-R6 (1998 - Present)
6

Insert the ignition key into the seat lock on the left side of the tail fairing. 2006 and newer R6 models place the seat lock under the tail fairing, near the left rear foot peg. Twist the key clockwise to release the seat lock mechanism.
7

Grasp the rear of the passenger seat and lift it up slightly. Pull the seat toward the rear of the motorcycle until the hooks under the front of the seat are free of the tabs built into the subframe under the tail fairing.
8

Pull the rear corners of the rider's seat up to reveal both mounting bolts. Unscrew the bolts with a 5 mm Allen wrench. Lift the rear of the seat up, then pull it away from the gas tank until the tabs under the front of the seat are free of the cross-member below the base of the gas tank.
9

Slide the rider's seat tabs under the frame cross-member to reinstall the seat. Lower the back of the seat onto the subframe, then screw the mounting bolts into place with a 5 mm Allen wrench.
10

Hook the front of the passenger seat onto the tabs built into the subframe under the tail fairing. Lower the seat onto the fairing and press down until the seat lock mechanism clicks into place. Remove the ignition key from the seat lock.

Jan 15, 2013 | Yamaha XT 125 X Motorcycles

1 Answer

How to remove rider seat 2011 dyna wideglide


Hi Anonymous, seat removal can range from the simple and obvious to the complex and baffling for the novice new Harley Davidson owner. Seems like the more expensive the bike is the harder it is to remove the seat. So let's start with the most expensive. 99% of all Harley seats have a male tounge in the front that slides into a female reciever that is either bolted or welded to the frame just behind the fuel tank. For this reason when ever you are removing a seat you must always slide it backwards 3-5 inches. Next they may may have a bolt on each side usually under a flap on the seat. Then there is the seat strap that is secured on both sides, only one side needs to be removed. A single phillips head bolt can secure it to the rear fender or it may have a bracket with two studs secured by nuts or knobs to fasten the rear portion of the seat. On newer model short seats there may be a "T" stud that locks in the rear portion of the seat just a few inches in front of the rear seat bolt, you have to push forward and lift up after you remove the bolt. If you have a pillion pad or passenger seat that snugs up against the front seat there can be a bolt securing the two to the rear fender, you have to get your hand in between the two seats and force seperation of seat material to see and gain acess to the bolt. Finally there is the rear seat bolt in the back that is the caboose of seat fasteners, usually a large chrome bracket, that screws into the rear fender. Care must be exercised in covering this shinny bauble with your hand during the sliding back procedure so as to NOT scratch the tour pak. So when all the hidden and mysterious fasteners have been removed, it's lift up in the rear, slide backwards a few inches and bingo you have mastered the impossible. Good luck.

Mar 24, 2012 | 2011 Harley Davidson FXDWG Dyna Wide Glide

1 Answer

How top remove seats


  • Lift the rear of the passenger seat's cushion to find the screw that secures the seat to the rear fender. Use a 5-mm Allen wrench to remove the screw.


  • Lift the rear of the passenger seat slightly and pull it away from the rider's seat.


  • Use the 5-mm Allen wrench to remove the screws from the rear of the rider's seat.


  • Lift the rear of the rider's seat upward slightly. Pull the seat back until the tabs on the front of the seat separate from the motorcycle's frame.


  • Mar 27, 2011 | 2005 Suzuki Boulevard C50

    1 Answer

    How do I raise the seat up on a 2001 kawasaki zx9 ?


    If it's like my 2003 ZX9, to take the riders seat off you open the rear compartment by removing the passenger seat, the front bracket that hold the the seat has two 8mm bolts and a screw. Unscrew the screw and remove the bolts and slide or remove the bracket and then the riders seat lifts up.

    Jul 23, 2010 | 2001 kawasaki ZX-9 R Ninja

    1 Answer

    How do you remove the seat on the 2002 honda shadow ace delux to change the battery


    First, remove the passenger seat; one bolt behind it anchors it to the fender; then lift the back end and push against the rider seat to disengage the keyhole mount to the front bolt. It pops up when you do this.

    The bolt that engages the passenger seat bracket also anchors the rider seat. Remove it and lift the seat off.

    An electronic (expensive) module clips in above the battery. Remove it and handle it carefully. Now you can get the battery.

    I learned this by experience on a bike I had never seen before, so I checked the Clymer manual. This is what it says too. Worth the money!

    Mar 25, 2010 | 2002 Honda VT 750 CD Shadow A.C.E. Deluxe

    1 Answer

    Just bout a used '02 vmax. I put stock seat back on. Now the release for the gas tank is not working. Any takers on how to get it off to look at what is going on?


    From Orig Owners Manual on how-to :
    Read carefully and hope it helps.

    Fuel tank cap
    To remove the fuel tank cap
    1. Push the levers on the left and
    right side of the rider seat backrest
    as shown and slide the rider seat
    backrest forward.
    2. Insert the key into the lock, and
    then turn it 1/4 turn clockwise. The
    lock will be released and the fuel
    tank cap can be opened
    To install the fuel tank cap
    1. Insert the fuel tank cap into the
    tank opening with the key inserted
    in the lock.
    2. Turn the key counterclockwise,
    and then remove it.
    3. Slide the rider seat backrest rearward
    and push it down.
    NOTE: @
    The fuel tank cap cannot be installed
    unless the key is in the lock. In addition,
    the key cannot be removed if the cap is
    not properly installed and locked

    To install the rider seat
    1. Insert the projection on the front of
    the rider seat into the seat holder
    as shown.
    2. Place the rider seat in the original
    position, and then tighten the bolts
    and screws.
    NOTE: @
    Make sure that the seat is properly secured
    before riding.
    @
    3. Return the rider seat backrest to
    the original position

    Mar 22, 2010 | 2002 Yamaha V-Max

    1 Answer

    Need to remove seat to jump battery...how do I do that?


    There is a bolt at the back of the passenger seat, you remove it and slide the seat to the rear This will expose the bolts at the rear of the rider's seat, remove them and slide the rider's seat back. There's your battery.

    Oct 25, 2009 | 2007 Suzuki Boulevard

    1 Answer

    Friction zone on 620 clutch


    There are nice adjustable levers avaliable at your Ducati store. A good thing if you have smaller hands. Doesn't cure the sudden engagement, but maybe makes it easier to control.

    Nov 20, 2008 | 2005 Ducati Monster 620 Dark 2 disc

    Not finding what you are looking for?
    2006 Ducati Multistrada 620 dark Logo

    Related Topics:

    335 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ducati Experts

    Arnie Burke
    Arnie Burke

    Level 3 Expert

    4514 Answers

    Gino Cussen
    Gino Cussen

    Level 2 Expert

    216 Answers

    yadayada
    yadayada

    Level 3 Expert

    67757 Answers

    Are you a Ducati Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...