Question about 2005 Kymco Xciting 500

1 Answer

Yamaha r6 doesnt start at 40 degrees, any help?

Posted by on

  • 2 more comments 
  • marlen_vb Jan 08, 2009

    my motorcycle is an 04, yamaha r6, I use it everyday,but in the early morning it doesn't want to start. besides this I haven't had any other problem with it.during the day it work perfectly fine, im guessing is the cold outside but is only 40 degrees.and if it is the cold, how can I fix it?

  • marlen_vb Jan 08, 2009

    im sorry I say the cold hahha.. the cool weather. sorry is me who have the cold not the motorcycle haaha :)

  • dhurt May 11, 2010

    Start by checking the oil. Is it a cold weather oil, could be too think?

  • Terry Engel May 11, 2010

    Can you tell me what year the bike is please, and how often do you sue it...the last time you used it...things like thta



    Thank you

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Your oil is to thick the same happend to my buell, it start and stall about 5 times befor it would stay running. around 45 degrees outside,I switched to a thinner oil for winter. now it starts and rides in 10 degrees.

Posted on Jan 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

R6 overheating


Hi, Anonymous and the usual suspects are:
1. Low coolant level.
2. Restricted radiator air flow.
3. Faulty thermostat.
4. Coolant pump or fans inoperative.
5. Vent hose crimped.
6. Air in the coolant and needs bleeding.
7. Engine idling too long or bike moving too slow.
8. Coolant too old needs to be replaced.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.r6-forum.com/forums/65-new-member-section/160259-02-r6-overheating-problems.html
R6 overheating problem solved
Yamaha YZF R6T Supplementary Service Manual
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

May 19, 2014 | 2005 Yamaha YZF-R6

1 Answer

R6 2007 will start but wont rev


Hi, Moses for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.r6-forum.com/forums/57-garage-mechanical-help/158952-bike-starts-wont-rev.html
07 R6 throttle is not getting engaged and clutch seems jammed bike was...
2007 Yamaha YZF R6 Service Manual R6 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Mar 27, 2014 | 2007 Yamaha YZF-R6

1 Answer

Fixya review


Hi, Anonymous and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery, should have 12.5 volts or better and be able to pass a load test if necessary.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and CDI box.
5. Spark plug cables in bad condition, shorting / leaking, spark plug cable connections loose, check for spark leakage in the dark.
6. Faulty ignition coil, pick up coil, trigger coil or CDI box testing needs to be checked with an ohmmeter at 70 degrees Fahrenheit
7. Faulty safety switches clutch, kickstand, neutral, off/on etc.
8. Faulty ignition switch.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.r6-forum.com/forums/57-garage-mechanical-help/38102-00-r6-turns-over-but-no-spark.html
http://pnwriders.com/threads/99-r6-wont-start-no-spark.138195
2008 2009 Yamaha YZF R6 Service Manual R6 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Mar 04, 2014 | Yamaha YZF-R6 Motorcycles

1 Answer

2003 yzf r6 hit start button but nothing happens


Hi, Anonymous and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Tip over sensor needs a reset.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Starter control circuit, relay, or solenoid faulty.
10. Main fuse or circuit breaker may be blown or faulty.
11. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
http://www.r6-forum.com/forums/57-garage-mechanical-help/152797-2002-r6-starts-starter-button-doesnt-work.html
Starting issue push the start button and nothing happens
2003 2004 Yamaha YZF R6 Service Manual R6 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Apr 03, 2013 | 2003 Yamaha YZF-R6

1 Answer

Yamahar6 secondary injectors code show 40


Not sure what your talking about - 2000 R6's had carb's. The first year for a fuel injected R6 was 2003.

Feb 13, 2013 | 2000 Yamaha YZF-R6

1 Answer

2001 yamaha r6 wont turn over


Could be a bad ignition switch. if the system isn't getting signal it won't start.

Feb 06, 2013 | 2001 Yamaha YZF-R6

1 Answer

Hi i have a 99 r6 and i have no spark to any of the plugs. help please !!


Hi, Jonathan and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery, should have 12.5 volts or better and be able to pass a load test if necessary.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and CDI box.
5. Spark plug cables in bad condition, shorting / leaking, spark plug cable connections loose, check for spark leakage in the dark.
6. Faulty ignition coil, pick up coil, trigger coil or CDI box testing needs to be checked with an ohmmeter at 70 degrees Fahrenheit
7. Faulty safety switches clutch, kickstand, neutral, off/on etc.
8. Faulty ignition switch.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.r6-forum.com/forums/57-garage-mechanical-help/335658-no-spark-troubleshooting-nutshell-may-still-need-help.html
http://pnwriders.com/threads/99-r6-wont-start-no-spark.138195
1999 2002 Yamaha YZF R6 Service Manual R6 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals
Project Yamaha R6 Part
Yamaha YZF 600 R6 5SL 05

Aug 22, 2012 | 1999 Yamaha YZF-R6

1 Answer

I have a 2007 Yamaha R6. Today I tried to start


i WOULD SAY YOU HVE IT FIGURED OUT. yJE TEMP SENSOR INDICATES AND COMMUNICATES WITH FAn, gOOD lUCK

Oct 04, 2009 | 2007 Yamaha YZF-R6

1 Answer

Motorcycle yamaha r6 won't start at 40 degrees, any help?


try spraying a little gas in the carb if it starts then the problem would be your choke

Jan 08, 2009 | 2005 Kymco Xciting 500

Not finding what you are looking for?
2005 Kymco Xciting 500 Logo

Related Topics:

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kymco Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4481 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Kymco Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...