SOURCE: How do i remove battery from 2007 883 low harley davidson
To charge the battery you can connect to the positive terminal on the battery or the large lug on the starter, then connect the ground to any clean bolt on the frame as the battery negitive goes to chassis
SOURCE: removing harley davidson ultra classic gas tank
Drain the fuel either by siphening or removing the cross over tube at the front of the tank and letting it drain that way or just block off those cross over lines and leave the fule in the tank for removal.
0) remove seat
1) drain fuel
2) undo cross over line (bottom front of gas tank.
3) shut off pet **** and remove fuel line from pet ****.
4)there should only be 2 bolts holding the tank on, one at the top front of the tank and one at the back of the tank.
All in all a pretty easy (but possibloy messy) job.
SOURCE: i need to remove the fuel tank on my 2006 harley davidson
I haven't worked on a bike as new as yours but your bike is one of the Dyna series of motorcycles that Harley makes. Most Dyna's have one piece tanks instead of the twin tanks like on a Softail series bike.
To get the tank off, first remove the seat. Disconnect the fuel lines and drain the fuel from the tank. Disconnect the fuel "crossover" hose at the front of the tank. Disconnect any wires going to fuel gauges and fuel pumps in the tank. Now, take the nut off the top of the dash and remove it. There should be three bolts that hold the instrument cluster on, remove them. Unplug the connectors under the instrument cluster, usually three of those. Now, there is one bolt at the front of the tank and possibly two at the rear. Lift the tank off the frame.
Taking the tank off is not that difficult of a problem. Just watch what you're doing and don't force anything. If something won't come off, look for anonother bolt somewhere. Usually, the wiring connectors are idiot proof in that they will only connect with the correct mating plug and you can't connect them in the wrong way.
If the bike per chance has split tanks, you won't have to take the instrument panel off the frame, just the dash cover. The tanks have two bolts in the front and one bolt in the rear of each tank, one on either side of the frame.
Now, keep in mind that I told you that I haven't worked on your particular model of bike doing this particular job. But, Harley usually doesn't change much on their bikes. View the information I gave you here a "general guidelines". Use your head and you'll be using the best tool you've got. No problem.
Testimonial: "thank you. i am going to give it a shot. i layed the bike over a couple weeks ago. i need to paint the tank. "
SOURCE: Replacement of a stock fuel gauge on a '06 Harley Street Bob.
no need to remove tank, Remove terminal pins from connector under left side of tank then pull gauge and wires out. Install new gauge, replace terminal pins in their propper place in the connector,plug it in and varify the repair.
SOURCE: need to change battery
remove the screw from the rear of the seat lift the seat gentlypulling the seat towards the rear of the machine once you have the seat of the battery is right in front of you. Regards Geoff
365 views
Usually answered in minutes!
×