Question about 2005 Yamaha YZF-R1

1 Answer

Cant get the oil pan off

Trying to replace the oil pan and having problems getting the old one off

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Yamaha Master
  • 39,992 Answers

Hi, Gilbert for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.r1-forum.com/forums/104-04-06-r1-mechanical-help/160271-oil-pan-removal.html
How To Oil Pan Removal Install 06 R6
2004 2005 Yamaha YZF R1 Service Manual R1 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Posted on Aug 24, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i change my oil


Drain old oil, replace filter, fill with new oil.
First find out how much oil your car holds, and what viscosity (you'll see on any new bottle of oil, 10w-30, 5w-30, 0w-20, etc.) Then find out what filter you need. Honestly walmart is your best bet. They will tell you which model your car needs. Get your car on a sloped surface, (you can buy plastic ramps cheap specially for this) and remove the plug from the oil pan Located toward the front of the car directly under the dashboard. You can google pics of an oil pan. Drain the used oil, find your old filter, remove it, replace, put the plug back in and fill it with however much yoyr engine needs. Most cars take 3 to 5 quarts. Good luck

Feb 27, 2015 | 2000 GMC Sierra

1 Answer

Oil Pan Gasket Replacement/ Oil Pan removal


yes the starter does have to be removed but also the engine mounts must be also as the engine must be raised about 10 " to get the pan out. if you do try this make sure you have very very sturdy jack stands for the engine to just a jack as the jack will lift it but wont maintain it long enough to safely remove the pan and reinstall it......good luck and be very carefull

Aug 11, 2014 | 1998 Oldsmobile Silhouette

1 Answer

Removing oil pan


Need the make, model and year.

Jun 30, 2013 | Cars & Trucks

1 Answer

Oil Pan Rusted and needs replaced


ok not to hard to replace you need to go to auto store and buy a new one. it may or may not come with new gaskett they can tell you what size you need if it dosent come with a new one. also you will need to drain the oil before removing the old pan so make sure to buy new oil for that.. your basicly doing an oil change so you may as well get new oil filter too. then after you have everything... new pan, oil, oil filter, gaskett.. just get under take out oil plugg drain oil in catch can. remove the oil pan bolts you may have too tap the oil pan in different directions to get it to drop off. clean away old gaskett if you need to, and replace new gaskett and oil pan, lay new gaskett ontop of new oil pan and hold in place to get a couple bolts started then start and tighten all bolts useing a cross bolt tightining pattern to make sure the pan is in place{ tighten one bolt then do opposit bolt} change oil filter, and refill with oil.. if you need to see this done youtube is an excillent place to find videos on this.. i hope this helps... remember to let the car cool before doing this so get everything you need and start the next day before you drive.. nothing worse that getting hot oil down you arm while your laying on the ground...

Jul 24, 2011 | 1995 Ford Windstar

1 Answer

How to change oil pan seal


start the car and let run for 2 minutes just to warm the oil and make it a little thinner,turn car off. now if you cant get under the car jack ther car up, and let the vehicle rest on jack stands. drain the oil from the oil drain plug which should be on the bottom of the oil pan. once the oil is drained replace the oil drain bolt and tighten it. then remove all of the bolts that keep the oil pan in place. should be around 6 of them. remove oil pan and scrape off the old seal with a clean scraper. place new seal on, and replace the pan. put the bolts back on tightly and refill the engine oil to specified amount. check to be sure there is no leak on the oil pan. turn vehicle on and let the car run for a few minutes. make sure there is still no leak.

Dec 22, 2010 | 1991 Oldsmobile Cutlass Calais

1 Answer

Cant get oil plug loose


FIRST: oil the plug (I know it sounds redundant)
1. breaker bar instead of ratchet wrench (buy one if you dont have one)
2. extension bar on breaker bar handle
If Getting desperate:
1. buy a new oil pan plug
2. use a damaged/rounded extraction socket on a breaker bar.
3. use an extension handle on the breaker bar handle
Be prepared to buy (and install)a new oil pan if the threads on the oil pan are ruined.

Installing a new oil pan is "easy" for experienced mechanics, but
replacing one can be involved for 1st-timers - and you'll usually want to buy (and install) a new oil pan gasket with the new oil pan.

That's everything from breaker bar (your minimum for stuck bolts) to replacing plug and pan (the worst-case scenario).

Sep 21, 2010 | 2006 Chevrolet Monte Carlo

1 Answer

Oil pan removal?


Im not sure if you are talking about the motor pan or the tranny pan. But I have lifted the motor and tranny together on a vehicle to change the motor pan and mounts before. I remember having to loosen the fan shroud. Undo linkage on the tranny and make sure the shifter boots were loose. The key for me was going real slow with the crane and having extra eyes around. It was a pain but it worked out.

Feb 20, 2010 | Ford E-150 Cars & Trucks

1 Answer

Replace oil pan gasket 2002 chrysler 300m


The owner of the car should be able to locate and replace oil pan gasket .prepare the equipment to be used .Drain the oil from the oil pan ,spill it to an empty big can that can carry the oil from the oil pan.Then twist the bolts that connect the oil pan to the engine.After removing the bolts then you have take the old gasket off to the oil pan.After taking off the old gasket then you have to replace it with the new oil pan gasket.then return the oil pan with the new gasket. twist the bolt back until the oil pan that connect the oil pan with the engine.And return the drain plug twist until it will not spill.

Sep 30, 2009 | 2001 Chrysler 300M

1 Answer

Oil pan sits on the steering rack


swap oil pickup pipes and the sump should do the trick for you

Mar 14, 2009 | 1985 Mazda 626

1 Answer

2001 Concorde 3.2 L Oil Pan Removal


if you have your old drain plug take it to a auto part store get a self tapping drain plug! save big$$$$$ I have installed piles of these they last for ever $5-$20- for one. cheers

Dec 24, 2008 | 2001 Chrysler Concorde

Not finding what you are looking for?
2005 Yamaha YZF-R1 Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...