Question about Motorcycles

Open Question


Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Top tension will not ajust

check the thread is between the tension plates and not jammed behind a plate

Oct 24, 2016 | Cars & Trucks

1 Answer

What causes failure to pull

possible jammed clutch cable not allowing the plates to engage when you release the handle

Feb 09, 2016 | Motorcycles

1 Answer

Ebosser by craftwell

Replace it with a new one. Repair shop should have it though. Or, you can find any adapter that fits in and have the same spec, input voltage, output voltage, ampere and others.

Aug 27, 2014 | Computers & Internet

1 Answer

My 2003 pontiac grand am clutch pedal stuck to the floor

Is it just sunk to the floor or actually stuck? Possible linkage broken, or broken return spring on clutch plates. If it is actually stuck, then I would guess jammed linkage or damaged input shaft splines.

Apr 11, 2013 | 2003 Pontiac Grand Am

1 Answer

On brother vx 1500 when press foot needle will not move

It's jammed, take off the face plates and completely unthread it. Take out all the jammed up thread and it should operate freely:) hope this helped

Sep 20, 2012 | Sewing Machines

1 Answer

Elna SU purchased in 1977 jammed; rotating wheel is unable to move forward

it sounds like the machine needs to be serviced at a sewing machine

May 05, 2012 | Elna Sewing Machines

1 Answer

My 2002 saturn vue won't go into gear

Sir ,
Kindly tell us whether your engine starts up properly to idle . If yes , then your problem is with the transmission system or with the clutch plates . If the clutch plates are too empty , the gear would be almost stuck . If the car is in N-neutral , try pushing it and while moving slightly try to change the gear . Engine oil and transmission oil should be checked up regularly .
At present situation you will have to have your gear system unjammed or opened up by a professional and have your gear box replaced or checked for jammed gears which is pretty time consuming and difficult job . Else you will have to replace the clutch plates and youre ready to fly again .
Thanking you , Dixon Dominic

Jun 01, 2011 | 2002 Saturn VUE

1 Answer

I can't get the clutch plates off soI can remove

take spark plug out put a piece of rope in hole to lock piston there is a screw in clutch where drive shaft goes usually a torx bit head. when turnig screw rope will stop piston with out damage. keep rope in to remove clutch assm.

Jul 17, 2010 | Ryobi Garden

1 Answer

I have a HP Photosmart 2710 All in One with jammed paper.

The only option is to open up your printer to get access .....try using tweezers to pick on it and slowly removing....

Nov 10, 2008 | HP Photosmart 2710 All-In-One InkJet...

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4888 Answers


Level 3 Expert

79847 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides