Question about Motorcycles

Open Question

Kawasaki KVF360 quad , it will not go into gear without grunching the gears, so what does go on inside that big black cover on off side !!!

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

czaa
  • 4514 Answers

SOURCE: HD Sportster 1200cc Custom. Runs fine for 10 to 20

your choke could be sticking or other carb adjust needed. also get that clutch inspected before u start pedaling!

Posted on Aug 06, 2009

Testimonial: "Thank you for the comment!!! "

  • 3567 Answers

SOURCE: kawasaki en 500 c1Im having problems changing up and down gears

The bike has some bent shift forks. Bent shift forks do not move the slider gears properly when changing gears. Expensive to fix.
1ae44e1.gif

Posted on Sep 15, 2009

  • 850 Answers

SOURCE: first and second gear in 1994 kawasaki bayou is

selector cam may be damaged

Posted on Jan 05, 2010

  • 95 Answers

SOURCE: Kawasaki gpz 400r Problem: Gear selecter has

get a used on from a salvage yeard

Posted on Jun 17, 2010

  • 409 Answers

SOURCE: Kawasaki EL250 Eliminator 1987 model will only go into first gear and Neutral no others

All kawasakis will only go into first gear or neutral until you are doing approx 12 mph...

Posted on May 31, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have what sounds to me like rocker arm ticking. The previous owner said its the clutch set up and that they are known for this issue. Is this true?


Rocker arm and tappet ticking is very distinctive. Easy way to test. Get it warm and pull the clutch in, put the bike in gear. Does the ticking stop. I didn't think so ?? Check if the adjustment is manual or hydraulic. I am not familiar with you bike, although I have had a few kwackers including an H1 500 triple.

Mar 20, 2016 | Adventure Power 2003 Kawasaki Prairie KVF...

1 Answer

Shifter moves on big bear 350 but quad wont reverse now it goes forwards


for some reason you are not getting into reverse , there is no real reason it should stay in forward gears unless there is someting wrong with the shifter itself being in the wrong position this can happen take it off and reposition it and make sure your clutch is disengauging to shift gears , will it go into all gears or just 1 forward , ck into that and be a little more specific on the problem ,good luck

Mar 18, 2014 | Grizzly Big Bear Atv Maintenance Free...

1 Answer

Loud knocking noise at idling posotion


Look at kick start gears behind the clutch basket. The bushings on the gears wear out causing the gear to hit rivets on back of clutch basket creating a loud hard knock. you will have to replace whole gear the bushings are not sold seperatly

Mar 25, 2012 | kawasaki Quad Bikes

1 Answer

Quad driver module computer circuit #2 fault ?


I will start by pinout check current + to ECM and - ground there is many .
A Quad driver work like a big fuse d?pends some are resettable and other not reset(ECM defect) if it is so then you have to check all solenoid not short to ground before replacing ECM it will burn without checking the solenoid
hope it help

Feb 08, 2012 | 1988 Oldsmobile Delta 88

1 Answer

Beach Racer Quad fuse for high gear keeps blowing out


Called wayfair with same issue. Extra fuses are sent attached to the battery packs. They said to go to Walmart or an auto parts store and to get a 40 v fuse instead of the 30 that comes with the quad. Worked fine when we switched the fuse so far.

Dec 30, 2011 | Activeforever CTM Kids Electric Big Beach...

1 Answer

Water pump leaking. This car has a 4cyl. quad motor, I hear its a big project to change the water pump. can you help?


Have to look at the new pump,some are a splined shaft that just slides on to the gear ,those are fairly easy,if the new pump has a gear on the end the whole front cover and timing chain has to come off ,big job.

Nov 26, 2010 | 1995 Pontiac Grand Am

1 Answer

Fluid changeing.


hello should be small cover on gear shift side of case with 3-4 screws in it , oil filter is behind cover, not many fluids to change on this bike unless it is automatic, also there is big screw in bottom of motor to drain oil.

Mar 31, 2010 | 1996 kawasaki VN 800 Vulcan Classic

2 Answers

Rearend for a 1993 k1500 dont know how to find out the size


two ways this can be done.
1. in the gove box there is a build sheet a square
piece of paper thats glued on inside with a bunch
of three or four letter codes . call a dealer and they,
tell you which ones tell rearend info.
2. remove rearend cover , you will see veryis gears
count the teeth on the big gear on the left side,
write it down,count the teeth on the gear that comes from the drive shaft,write it down.
you can call dealer or divide the big gear[ring gear]
with the pinion gear the small gear that comes from
the drive shaft.

Sep 25, 2009 | 1993 Chevrolet K1500

1 Answer

Drive train slipping


Get someone to help--set the brakes and try to drive it. The other person needs to watch what is turning. If it turns into the differential, but nothing happens coming out on either side, then drain the oil out of, and open the cover on the differential. Look at the drive pinion gear (you can run this for a short time without lubrication), is it turning? That will turn the ring gear which turns the differential unit. If one axle turns, but the other side doesn't, look for a broken axle on the side that turns. If the input pinion gear doesn't turn, look for a broken pinion shaft. Hope this helps!

Sep 06, 2009 | 2002 kawasaki KLX 300 R

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...