Question about 2003 Suzuki RM 125

Open Question

2002 RM125 fork oil quantity - 2003 Suzuki RM 125

Posted by on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: i dont now where can i put the oil in the front

you got to have aum one take ur foorks apart

Posted on Apr 21, 2009

  • 6 Answers

SOURCE: 1991 rmx250 fork oil quantity?

about 22.1 oz. give or take a .1 oz. or two

Posted on Jun 30, 2009

  • 10 Answers

SOURCE: Correct quantity(ml) of oil per front shock(fork)

110mm oil height in each fork tube. Remember to bleed it first to ensure all air is out the inner chamber and then measure 110mm from the top of the tube, fully compressed with no spring or damping rod inside. USe a 5W fork oil. You can also look at WWW.RACETECH.com under search, and then valving search, enter all your relevant details and bike model and it calculates it for you.

Posted on Mar 01, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How much oil should i put back in the fork after a seal change on a 2001 mx 50


The Marzocchi Workshop: oil quantity's & levels

marzocchiworkshop.blogspot.com/p/oil-quantitys-and-levels_858.html
Oil quantity's are measure in volume in 'cc', always use a narrow measuring jug for ...MY, Fork, Measurement, RH, LH .... 2001, Z-1 MCR QR20+ 01, Height (mm), both legs, 50 .... 2003, MX PRO COIL c.105 SSVF, Height (mm), both legs, 50.

Aug 19, 2015 | Motorcycles

1 Answer

What is the fork oil capacity on a 2002 roadking


Hi Anonymous, for more information on your question please visit the websites below and good luck:
Cycles Capacities and Fluid Requirements Fork Filling Quantities

Dec 19, 2012 | 2002 Harley Davidson FLHR - FLHRCI Road...

1 Answer

I was looking for the oil capacities for a 2002 FLSTC, primary, transmission, and engine, as well as the front fork tubes?


The engine oil capacity is three quarts with the filter change. The primary is 36-44 ounces. Stand the bike straight up as you can safely, remove the derby cover, and fill the primary case until the oil level is just to the bottom of the outer clutch shell. Do not overfill. The transmission holds 20-24 ounces. Check it using the dipstick with the bike standing straight up. As for the fork capacity, I do not know that information. There are two different quantities. One is a "wet" quantity to be put into the fork tubes when oil is simply drained from them and a "dry" quantity when you have disassembled the fork tubes for some reason. Your dealer will provide you with this information if you call them. I'm sorry that I don't have that information.

Good Luck
Steve

Jul 26, 2011 | 2002 Harley Davidson FLSTC - FLSTCI...

1 Answer

My 2002 fxd front forks are soft and come close to bottoming out. Does the fluid need to be changed? if so how and how much?


Yes your fluid may need to be changed if you want a more firm front end. I don't know what type of fluid you have in the forks now but what you need to do is to go with a thicker oil. In my '94 FXDWG, I went to PJ1 30 weight oil. Since I don't have a book on your late model bike, I can't tell you how much oil to put into each tube. There is a "wet" and a "dry" quantity to add when you've drained them. If you simply drain the oil and refill the fork tubes, use the "wet" quantity of oil. If you disassemble and clean the tubes out, use the "dry" quantity when you refill.

To drain the oil, look on the trailing side of the fork sliders. You'll see a screw or a set screw in the slider. Take this plug out and some of the oil will simply flow out. To get all of it out, hold the front brake and push down on the handlebars. Now, oil will spray everywhere so don't do this job in your living room. Once you get the oil out of both tubes, reinstall the plugs and refill the tubes one at the time by removing the top cap out of the tube and pouring the prescribed amount of oil into each fork tube. Ride the bike and see if the front suspension is too soft, too firm, or just right. Remember, the heavier the viscosity of the oil, the more firm the front suspension is. If you can't get it right, you might want to consider changing the springs in the fork tubes.

Good Luck
Steve

May 04, 2011 | 2002 Harley Davidson FXD Dyna Super Glide

1 Answer

What grade of oil is used in the forks of a 1991& what quantity


oil: silkolene medium fork oil
quanity: 280mls each leg

Nov 03, 2009 | 1985 Yamaha XJ 600

1 Answer

What is the fork oil level after replacing seals


Here is a manual for your bike....search for English parts of it.....
http://safemanuals.com/user-guide-instructions-owner-manual/HUSQVARNA/CR%20125-_M

The manual has directions for taking out parts, putting in SAE 5 or SAE 7.5 fork oil, and then measuring the distance from the top of the fork tube to the top of the oil. It should be 3.5 inches. That doesn't sound right, but maybe that is with the forks compressed, the directions may be indicating that. You could judge by the amount you drained out of the forks. Here are the directions in the manual.......
OIL FORK LEVEL
For the regular fork operation,
both legs must be provided with
the necessary oil quantity.
Remove the forkrods from the
fork to check the oil level inside
the forkrods. Work as follows:
- remove the power rod caps;
- remove springs from the stems
letting the oil drop into the
latter;
- bring forks to stroke end;
- check that the level is at
distance “A” below the upper
limit of rods.
(distance A is 3.5 inches)

Oct 03, 2009 | 2002 Husqvarna CR 125

3 Answers

KX 125 (2003) motorcycle


its 120 mm or 4.7 inches from the top of the fork
Some measure the oil quantity and fill the fork up, some fill the fork up and measure the oil level. The most correct method is to measure the level, I guess, but many guys measure in quantity.. both ways work well.
1dcced6.jpg

Nov 26, 2008 | 2003 kawasaki KX 125

Not finding what you are looking for?
2003 Suzuki RM 125 Logo

Related Topics:

383 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...