Question about 2000 kawasaki ZX-12R

3 Answers

Kawasaki zx12 i have a question if any one can help me i have a 2000 zx12r while in 1st gear at 40mph gearbox starts to hammer then comes out of gear then on decel it begins to ratchet then engages back into gear does any one have any advice for me

Posted by on

  • Anonymous Mar 28, 2014

    What stock tires come on a 2003 Kawasaki zx12r

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My zx 12 r Kawasaki water pump gasket was leaking and i put new gasket on it crank my bike back up and road it did the street now it keeping a noise like something is not line up right is the pice that look like a star have a off set to it i see the hole that supose to be line up with the oil pump hole can some on tell what is going on and that i have not miss my engine up please and by the way its not leaking any more fix that problem

Posted on Sep 13, 2013

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

IT SOUNDS LIKE UR DOGLEG SULECTOR IS WORN IN THE GEARBOX ,NOT ALOWING IT TO ENGAGE SMOOTHLY.

Posted on Apr 21, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Change gear!!!!

no need to be doing 40mph in first on any motorcycle!!!

Posted on Jan 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My fan on my zx12r does not come on when it gets hot


First check that fans good, attach power leads to it if it turns on next check the relay, swop with similar one, possible the horn if horn doesn't work there's your problem, replace relay. If it does work, replace thermostat.

Jun 10, 2014 | kawasaki KAWASAKI ZX6 ZX7 ZX10 ZX12 ZX14...

1 Answer

How to replace a clutch on a 2001 kawasaki zx12


Hi Lynn, for more information about your question please visit the website below. Good luck and have a nice day.
Kawasaki ZX12R Ninja 2001 Service Manual Download

Apr 27, 2014 | Motorcycles

1 Answer

1998 Kawasaki Vulcan 1500, when getting on it and shifting from 1st to 2nd it drops to neutral, however when riding it normal it goes through all of the gears just fine. Only has the problem with 2nd...


This is normal for Kawasaki's...2nd won't engage until the gearbox output shaft is turning fast enough to locate the centrifugal lockout bearing. This is to make it easier to find neutral at a standstill...

Feb 14, 2014 | kawasaki VN 1500 Vulcan Classic...

1 Answer

I HAVE A 2000 ZX12. WHEN I PUT IT IN GEAR IT SHUTS OFF


Kickstand or kickstand sensor also check its wiring.

May 09, 2012 | 2000 kawasaki ZX-12R

1 Answer

Kawasaki ZX12R engine code?


http://www.motoverse.com/tools/vin/kawasaki.asp

Go to the above lnk and type in your entire VIN. You have only displayed 13 digits only of 17.

Apr 21, 2010 | 2001 kawasaki ZX-6R Ninja

1 Answer

Can select 1st gear and 2nd gear but am unable to select 3rd gear at all..... New gear box?


The gearbox does not need to be relpaced. The bike has a bent shift fork. The engine comes out then gets a complete tear down to get to the bad fork. This will probably cost $1200 or so. Call a dealer and get an estimate. Please rate my answer. Thanks.

Feb 21, 2010 | 1999 kawasaki ZX-6R Ninja

1 Answer

Honda auto gearbox problem


worn shift fork. shifts linkage could be binding.

Mar 29, 2009 | 2000 Honda Accord

1 Answer

Kawasaki vn1500 classic 1st gear problem!..


it sounds like you have a broken dog on 1st gear. (on sprocket inside gear box) gearbox needs stripping down and investigating.

Feb 21, 2009 | 2000 kawasaki VN 1500 Vulcan Classic...

Not finding what you are looking for?
2000 kawasaki ZX-12R Logo

Related Topics:

364 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

68970 Answers

chris

Level 2 Expert

232 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...