Question about 2001 Harley Davidson FLHRCI Road King Classic

1 Answer

Oil pressure specifications flhrci 2005

Just need the actual oil pressure specs for engine of 2005 flhrci

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Harley Davidson Master
  • 3,506 Answers

30-38 psi (207-262 kN/m squared) at
2000 rpm and normal operating temperature
of 230 degrees F (110 degreesC)

Posted on Nov 28, 2014

  • jfhinton45 Nov 28, 2014

    30-38 psi (207-262 kN/m squared) at

    2000 rpm and normal operating temperature

    of 230 degrees F (110 degreesC)

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is it possible for the transmission fluid in my 2005 Road King to leak into the crank case oil pan?


if there is a faulty seal on the crankshaft then the gear oil can get to the crankcase
being a separate case with separate oil, check that the breather for the transmission is not blocked and the pressure build up is not forcing the oil past the seal into the crankcase

Mar 21, 2016 | 2005 Harley Davidson FLHRCI Road King...

1 Answer

? looking the bolt tension specs for flywheel and clutch pressure plate for 4hf1 thank you


Torque Specification - National Truck Spares ' Parts

www.nationaltruckspares.com.au/Parts.aspx?ProductTypeID=8...
1073, 4BC2 tq, Isuzu, Torque Specification, KT26 TLD57 NKR57 NPR57 ... 1075, 4HF1Tq, Isuzu, Torque Specification, NKR66 NPR66, 92 - 03, 4HF1, 4334

Small Block Chevrolet V8 Engine Specs ' Torque Specs ...

boxwrench.net/specs/chevy_sb.htm
Flywheel (Clutch). Thread Locker, 60 ft-lbs. Clutch Pressure Plate, Thread Locker, 35 ft-lbs. Centerbolt. (Harmonic Damper). Engine Oil, 60 ft-lbs. Bellhousin

Nov 07, 2015 | Cars & Trucks

1 Answer

2005 flhrci twin cam 88 oil pressure test procedure ,oil pressure specificatin


Hi Anonymous, start by checking oil level in tank and it is between the add and full mark. With engine at normal operating temperature 180-230 degrees and the use of a 10 micron synthetic media oil filter, oil pressure will be 30-38 psi at 2,000 RPM and 3-5 psi. at idle. The oil pressure light is designed to come on at 2 psi. or less. To accurately test oil pressure remove oil pressure sending unit and install known good oil pressure gauge that reads 0-50, there might possibly be some plumbing required for hard to access points. If you are out in the middle of nowhere and there is no cell phone service and your oil pressure gauge isn't working and your oil pressure light is burned out, despair not, you still have one last line of defense left HYDRAULIC LIFTERS.as long as those tireless workers are quiet, you have oil pressure, maybe not much, but enough to get you down the road at a slow to moderate speed using the least amount of RPMS as nessary. Good luck

Oct 10, 2012 | Harley Davidson FLHRCI Road King Classic...

1 Answer

I own a 2005 Chevy Tahoe. My oil pressure gauge has pegged out at over 80. This is not the first time this has happened. I had it checked out to see if it was actually a pressure problem but the...


The oil pressure sending unit works on resistance if the sender gets hot the resistance value may be out of spec causing the gauge to go to full. or you could have a loose or bad connection causing the resistance to go High.this may why it only happens on long trips.

Feb 06, 2011 | 2005 Chevrolet Tahoe

1 Answer

I jhust bought a 2005 srt4 47k miles on the way home the oil and check engine light came on does anyone know what it could be from


The oil light means that the oil pressure is low which may mean the oil filter is plugged up or the oil pump is wearing out and not generating enough oil pressure.

The check engine light indicates there is something wrong or out of specs. as far as a sensor on the engine, which should be checked.

An OBD-II Scanner can be used to analyze what is wrong with the engine. Try autozone or advance auto parts since they will scan it for free.

Good luck on the repairs.

Nov 05, 2010 | 2005 Dodge SRT-4

1 Answer

How do I check and possibly replace the engine oil pressure sensor in a 2006 GMC Envoy Denali?


Oil Pressure Test Check for proper oil pressure at the sending unit passage with an externally mounted mechanical oil pressure gauge. A tachometer may also be needed, as some specifications may require running the engine at a specific RPM.
  1. While the engine is cold, locate and remove the oil pressure sending unit.
  2. Following the manufacturer's instructions, connect a mechanical oil pressure gauge and, if necessary, a tachometer to the engine.
  3. Start the engine and allow it to idle.
  4. Note and record the oil pressure reading when the engine is cold. The engine may need to run at a specified RPM, if so check the vehicle's specification.
  5. Run the engine until normal operating temperature is reached.
  6. Check the oil pressure reading again with the engine hot and record the value. Turn off the engine.
Compare the hot oil pressure reading to the specification. If the reading is low, check the cold pressure reading against the specification. If the cold pressure is well above the specification, and the hot reading was lower than the specification, the engine may have the wrong viscosity oil. Change the oil, making sure to use the proper grade and quantity, and then repeat the test.
Low oil pressure readings could be attributed to internal component wear, pump related problems, a low oil level, or oil viscosity that is too low. High oil pressure readings could be caused by an overfilled crankcase, too high of an oil viscosity or a faulty pressure relief valve.

Oct 09, 2010 | 2006 GMC Envoy Denali

2 Answers

Where is the oil pressure sending unit oa a 2005 GMC Yukon with a 5.3 engin


my 2004 yukon engine oil sensor is at its highest, what is the problem

Feb 20, 2010 | 2005 GMC Yukon

2 Answers

Oil pressure guage dropped to 5 after an oil change in my pontiac bonneville gxp 2005


Did it stay there? If so, put a pressure gauge on the engine, to check the actual pressure and then you will be able to tell if it is just the sending unit/pressure sw , that is off.

Feb 09, 2010 | 2005 Pontiac Bonneville

2 Answers

Oil pressure


30 PSI hot idle is ok, 40-50 PSI at freeway speeds hot is good. this is based on using the correct weight of oil which is 10W-30W

Mar 30, 2009 | 2007 GMC Sierra 1500

Not finding what you are looking for?

Open Questions:

See all 2001 Harley Davidson FLHRCI Road King Classic Questions

2001 Harley Davidson FLHRCI Road King Classic Logo

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...