Question about 2005 Honda CR 125 R

2 Answers

Kickstart bought son honda cr125 for xmas went on track for first time,it cut out twice third time he tried to start it the kickstart wont go back for him to ride it .it seems jammed can anybody help thanks

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 188 Answers

Try push starting the bike off by putting it into 2nd or 3rd gear, and push it off with the clutch pulled in. Once you get speed up, dump the clutch out. This might put everything back to normal.???

Posted on Feb 11, 2009

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 36 Answers

Sometimes they will hang between gears and cause this.Put it in 2nd and rock it back and forth.Hope this helps.Always check the easy stuff first

Posted on Jan 04, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I put my Honda nsr 125 on a warm up after a warm up revved up then it cut &won't start back up , iknow the power valve servo has gone paid for one , has had new spark plug and air filter does spark

Hi Anonymous, and the usual suspects are:
1. Enrichner system plugged, not properly functioning or improperly operated.
2. Fuel overflow.
3. Restricted fuel supply.
4. Gas cap and or fuel tank not venting properly.
5. Plugged slow jet or passages.
6. Inlet system air leak.
For more information about your issue please visit the websites below. Good luck and have a nice day.
Honda NSR 125 won't start after cold Xmas
My Nsr 125 Wont Start Please Help
1988 1994 Honda NSR125 Service Manual Moto Data Project
Honda nsr 125 Owners manual

Jan 02, 2016 | Honda Motorcycles

1 Answer

1996 Honda cr125 just got it and the guy I had got it from said it was running one day and it just died on him while riding then never done anything with it. It set for 2 or 3 years now I've got it I...

youve jammed the need to remove the engine casing and reset the mechanism, check the return spring.also you need to set the float level on carb to correct check engine turns over remove spark plug,put in gear and turn back wheel.

Nov 16, 2014 | Motorcycles

1 Answer

Kickstart has no compression

no compression
has the spark plug come loose,
could be bust piston, rings or valves,
right googled it, its a 2 stroke no valves,
moving on, your have to remove the head and barrell to see whats gone, the piston or the rings. its probably the rings.
its not as hard as it sounds on a 2 stroke so even a novice could do it.

Feb 14, 2013 | 2003 Honda CR 250 R

1 Answer

My kx 60 wont kickstart but it will bump start

Sounds like low compression. Do a compression test,and it should have at least 90psi,..if not,its time to rebuild the top end..(piston,rings,bore)...pretty common for two strokes.

Aug 29, 2012 | kawasaki KX 65 Motorcycles

1 Answer

I have just bought a honda cr125 2003. the guy i bought from said the engin was running as a 139cc and was changed back to a 125 with new piston before i purchased it. i was riding along in 3rd gear, gas...

Unfortunately, there could be so many things wrong and none of them are good. If the top end is new, the rod bearing on the crank is the next likely culprit. You'll need to tear the motor down and see what went wrong. Good luck!

Jun 11, 2011 | Honda CR 125 R Motorcycles

1 Answer

Stalls out

Effectively it needs a few good runs to clean out the cobwebs. Turn up the idle screw and leave it like that until the bike returns to norma. Then just adfjust it back to normal.

Jan 18, 2010 | 2003 Honda CR 125 R

3 Answers

Engine seized?

First thing to do is make sure it's the kick starter that has seized and not the engine. Take the cover off the end of the crankcase and try to turn the crankshaft. Apparently these engines were notorious for doing bottom ends. Start pulling it down and see what you find..

Jul 16, 2009 | 2004 Yamaha YZ 250 F

1 Answer

Cr125 problems with acceleration

Hi,try the stator, may need rewinding.

May 18, 2009 | Honda CR 125 R Motorcycles

1 Answer

Yamaha DT50 MX Kickstart doesn't work

i assume the MX is a 2 stroke engine ! Those can be tough at the best of times but let's get it going 1st...This is a tiny lite bike sooo,turn igntion on, shift into 2nd gear and push that little devil until she pops sputters and starts. Now only use premium gas, clean spark plug regularly and use a premium oil, don't that baby out in the field for an hour to clean her out...good Luck to you friend...Tim

May 14, 2009 | 2004 Yamaha YZ 125

1 Answer

Honda cr125 86, engine kicks back

timing it"s all in the timing when it stalled it jumped time

Jan 12, 2009 | 2002 TM Racing Mx 250 4t

Not finding what you are looking for?
2005 Honda CR 125 R Logo

466 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4497 Answers


Level 3 Expert

63990 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides