Question about Bajaj Motorcycles

1 Answer

Where is the air fuel mixture screw for baja sc150?

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Bajaj Master
  • 40,627 Answers

Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.Scooter Air Fuel Mixture Screw Adjustment
How to tune carburetor in GY6 chinese scooter 150 or 50 cc
http://www.bajamotorsports.com/system/documents/49_ASSEMBLY_INSTRUCTIONS_-_SC150_Sun_City_150cc.pdf
http://www.bajamotorsports.com/system/documents/51_OWNERS_MANUAL_-_SC150_Scooter_Owner_s_Manual_VIN_prefix_L5YT_.pdf
http://www.bajamotorsports.com/system/documents/53_PARTS_CATALOG_-_SC150_HSun_150cc_Street_Scooter.pdf

Posted on Dec 04, 2015

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Thunder55
  • 318 Answers

SOURCE: fuel mixture screw

Begin by screwing the mixture screw in all the way until it stopps,,,but ONLY JUST STOPS,,,,,DONT FORCE IT,,,then look at the top of the screw slot,,and call that 12 oclock,,,now turn the screw out to you three full turns going through 12oclock,,that means 12 to 12 is one turn.

then start the bike,,,finish your adjustments now by slowley turning the screw outwards until the engine starts to misfire,,,at this point turn the screw back in one half to three quarters of a turn.Now you have the mixture set roughly.
For fine tuning,, you need to use a monometer while turning the mixture screw
Best of luck...

Posted on Jan 19, 2009

cape cod bob
  • 292 Answers

SOURCE: rich mixture virago xv250

http://www.stadiumyamaha.com/pages/parts/viewbybrand/2/Yamaha.aspx

look up your bike here and i think it is number 13 on the diagram. which looks like its right by where the throttle cable connects

Posted on Mar 24, 2009

  • 3567 Answers

SOURCE: screw setting for a 49cc baja dirt bike its a

GENTLY turn the idle screw and the air screw all the way in untill the LIGHTLY seat. Now turn each screw out one and one-half
( 1 and 1/2 ) full turns. This is the stock setting.

Please rater this answer. Thanks snow8006!

Posted on Apr 05, 2009

  • 1 Answer

SOURCE: looking for the air fuel mixture screws on carb any help?

[IMG]http://i199.photobucket.com/albums/aa59/88gixxer/100_4177.jpg[/IMG]

Posted on Apr 09, 2009

  • 3567 Answers

SOURCE: where is the air/fuel mixture screw

A “very helpful” rating for this answer? Thanks!

690eecb.gif

Posted on Jun 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ajust idle on 2002 FXDL


Hi Anonymous, on the right hand side of the carburator there is an idle adjusting screw with a spring behind it, turn screw clockwise to increase idle counter clockwise to decrease idle. There is also an air/fuel mixture screw inside a carb body lug that may or may not be plugged with an aluminum cap that's about 3/16" thick. This cap can be drilled out to acess the air/fuel mixture screw. Turning screw clockwise will lean out mixture and lower idle, turning screw counter clockwise will richen mixture and raise idle. You need to balance the two adjusting screws to obtain an idle of 950-1000 RPM then back out air/fuel mixture screw 1/4 turn, snap throttle to confirm responce, you may continue to back out air/fuel mixture screw untill desired throttle responce is achieved, if you see black smoke coming out of exhaust you have gone to far and need to turn screw back in 1/8 turn at a time. Good luck.

Oct 04, 2013 | 2002 Harley Davidson FXDL Dyna Low Rider

1 Answer

Cant start 2008 baja sc150 with out spraying carb and wont stay idling


Hi, Joe and the usual suspects are:
1. Enrichner system plugged, not properly functioning or improperly operated.
2. Fuel overflow.
3. Restricted fuel supply.
4. Plugged slow jet or passages.
5. Inlet system air leak.
For more information about your issue please visit the websites below. Good luck and have a nice day.
How to clean carburetor in 15 minutes
Pilot Air Fuel Screw Adjustment Explained
http://www.carlsalter.com/download.asp?p=150
http://www.scootermasters.com/manuals/pdf_255.pdf
http://www.scootermasters.com/manuals/Chetak%20Service%20Manual.pdf

Sep 22, 2013 | 2000 Bajaj Chetak 150

1 Answer

2008 baja sc150 have to spray carb with carb cleaner to start it


Hi, Joe and the usual suspects are:
1. Idle speed improperly adjusted.
2. Inlet system air leak.
3. Leaking accelerator pump.
4. Loose low-speed jet.
5. Plugged low-speed jet.
6. Contaminated or plugged low-speed circuit.
7. Enrichner valve is not seated or leaking.
For more information about your issue please visit the websites below. Good luck and have nice a day.
Pilot Air Fuel Screw Adjustment Explained
How to clean carburetor in 15 minutes
http://www.carlsalter.com/download.asp?p=150
http://www.scootermasters.com/manuals/pdf_255.pdf http://www.scootermasters.com/manuals/Chetak%20Service%20Manual.pdf

Sep 19, 2013 | 2000 Bajaj Chetak 150

1 Answer

Adjust air fuel mixture


Hi Wentzpatrick, on the right hand side of the carburator there is an idle adjusting screw with a spring behind it, turn screw clockwise to increase idle counter clockwise to decrease idle. There is also an air/fuel mixture screw inside a carb body lug that may or may not be plugged with an aluminum cap that's about 3/16" thick. This cap can be drilled out to acess the air/fuel mixture screw. Turning screw clockwise will lean out mixture and lower idle, turning screw counter clockwise will richen mixture and raise idle. You need to balance the two adjusting screws to obtain an idle of 950-1000 RPM then back out air/fuel mixture screw 1/4 turn, snap throttle to confirm responce, you may continue to back out air/fuel mixture screw untill desired throttle responce is achieved, if you see black smoke coming out of exhaust you have gone to far and need to turn screw back in 1/8 turn at a time. Good luck.

Jul 15, 2013 | Harley Davidson XLH Sportster 883...

1 Answer

How do you adjust ldle air mixture on 2002 dyna low rider


Hi Anonymous, on the right hand side of the carburator there is an idle adjusting screw with a spring behind it, turn screw clockwise to increase idle counter clockwise to decrease idle. There is also an air/fuel mixture screw inside a carb body lug that may or may not be plugged with an aluminum cap that's about 3/16" thick. This cap can be drilled out to acess the air/fuel mixture screw. Turning screw clockwise will lean out mixture and lower idle, turning screw counter clockwise will richen mixture and raise idle. You need to balance the two adjusting screws to obtain an idle of 950-1000 RPM then back out air/fuel mixture screw 1/4 turn, snap throttle to confirm responce, you may continue to back out air/fuel mixture screw untill desired throttle responce is achieved, if you see black smoke coming out of exhaust you have gone to far and need to turn screw back in 1/8 turn at a time. Good luck.

Apr 14, 2013 | 2002 Harley Davidson FXDL Dyna Low Rider

1 Answer

How do you adjust the air flow mixture on a 2005 electra glide


Hi Anonymous, on the right hand side of the carburator there is an idle adjusting screw with a spring behind it, turn screw clockwise to increase idle counter clockwise to decrease idle. There is also an air/fuel mixture screw inside a carb body lug that may or may not be plugged with an aluminum cap that's about 3/16" thick. This cap can be drilled out to acess the air/fuel mixture screw. Turning screw clockwise will lean out mixture and lower idle, turning screw counter clockwise will richen mixture and raise idle. You need to balance the two adjusting screws to obtain an idle of 950-1000 RPM then back out air/fuel mixture screw 1/4 turn, snap throttle to confirm responce, you may continue to back out air/fuel mixture screw untill desired throttle responce is achieved, if you see black smoke coming out of exhaust you have gone to far and need to turn screw back in 1/8 turn at a time. Good luck.

Apr 01, 2012 | 2005 Harley Davidson XL 1200 C Sportster...

1 Answer

My 2008 Baja SC150 runs fine on flat ground, but


the problem is most likely a crack on the black plastic intake. This same thing happened to mine.

Jul 25, 2010 | 2007 TN'G Baja 150

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bajaj Experts

sachin sharma
sachin sharma

Level 2 Expert

171 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Joseph Gallucci

Level 2 Expert

120 Answers

Are you a Bajaj Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...