SOURCE: vacuum line schematic 1987 toyota corolla le front wheel drive
It is similar to my rear wheel drive two door.
The main vacuum line from a vacuum source on the intake goes to the multi-hose valve on the top and the distributor vacuum advance.This multi-valve switching valve is the main connection to the other vacuum hoses on mine. Two lines come in from a vacuum source and thre go out to three components according to tempature. On mine the middle one off to side 1)goes to choke opener and switching vacumm valves mounted on the fenders the other middle one 2)second from top goes to another choke opener and EGR Valve and EGRModulator. The bottom hose connection is on when cold 3)and goes to a part on the carburator to help it run better when warming up a AAP valve.
There is a check valve diaprham thing inline to the EGR vlave on the second line from top.
I have another vacuum line on the drivers side of the carburator that has a check vlave inline but larger it goes to the throttle linkage to help slow the closing of the trottle on rapid deceleration.
SOURCE: 1990 toyota camry
Well if it is a 4 cylinder the timing marks would be small hole in camshaft lined up with little dot on head at 12 o'clock position and the crank with the pulley on should line up with 0 on the timing indicator. If it is a 6 cyl then the marks would be- camshafts both with dots up and lined up with indicaters on heads and crank timing mark on 0 with the harmonic balancer installed. Hope this helps.
SOURCE: Need to find Mass Air Flow sensor on 98 Camry
You are not stupd! :-) This car has a speed-density system. The computer is programmed to meter fuel and spark timing from manifold absolute pressure (MAP), engine temperature, air temperature, and throttle position only.
Are you having a problem?
SOURCE: 1998 toyota camry , 2 codes, p0171. + p1133
P0171 lean code. Clean the maf sensor. A f sensor is inthe exhaust pipe.
SOURCE: where is the fuel filter for 1995 toyota camry le ...
left side of engine compartment next to the air cleaner (between air filter box and firewall) bolted to inner fender
543 views
Usually answered in minutes!
×