Question about 2003 Husqvarna SM 450 R

1 Answer

Hi there, i own an '03 husqvarna sm 450 r, want to change the engine oil but dont know much i will need, i dont want to run short any assistance will be great Thanks, Dylan

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,512 Answers

Hi Dylan
Oddly, only the transmission oil volume is mentioned in the owners manual, and it appears that the engine and the transmission share the same oil, and require the same 10-60w oil, so I am assuming that is the as listed in the manual  holds 1.41litres (1.48 USquarts or 48 ounces),  You can download the manual by right clicking on   on this  here. and "save file as"   When yo changing the oil, don't forget to clean the filters when changing the oil. Page 100 has details in the manual. Details on the fill level are also in the manual. Hope this has helped. A FixYa rating  is a great reward for looking into this for you. Cheers!
regards robotek

Posted on Jan 04, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Amount of oil it holds


SMR's only hold about a liter. My 2007 SMR510 only held a liter of oil. Use the good stuff and change it often!!! I never went over 700 miles on oil.

May 05, 2014 | 2008 Husqvarna SM 450 RR

1 Answer

I have a 450 husqvarna chainsaw that will not run I have. Changed the spark plug still not running


Hi robert davis... You will use a 50 to 1 fuel ratio... 1 pint of 2 cycle oil to 6 gallons of gasoline.. Please take time to rate me

Sep 27, 2011 | Husqvarna 450 e-series 18" Chain Saw

1 Answer

Hi dear expert I have a Husqvarna SM 125 '07 (zCGH200AB7V011268) I have such a problem: blinking light oil (3 long 3 short) oil in the tank is full, look forward to your reply, Regards Nazar...


That warning is for the oil pressure- it's missing. Check the pipe connecting the tank to the oil pump and the cartridge filter. If they are free then the pump and the engine will have to be dismantled to identify what went wrong.

Sep 22, 2011 | Husqvarna Designer I

1 Answer

Hi; te450, when engine gets hot the clutch stops working,i replaced fluid with fork oil like dealer said, no change?thanks.


There may have been some confusion with the dealers advice.
Brake fluid is used in the hydraulic clutch master , its called fluid cause its not a oil , and has a high boiling point
Fork oil is for forks.it is a hydraulic oil, but an oil.
Engine oil is for engines that the clutch also runs in.

Apr 23, 2011 | 2006 Husqvarna TE 450

1 Answer

2000 Husqvarna SM 610 S has excessive engine vibration


Hi, Anonymous and the usual suspects are:
1. Wheels and or tires worn or damaged.
2. Engine/transmission/vehicle not aligned properly.
3. Primary chain is badly worn or links too tight as a result of insufficient lubrication or misalignment.
4. Engine to transmission mounting bolts loose.
5. Upper engine mounting bracket loose.
6. Ignition timing incorrect due to a poorly tuned engine.
7. Internal engine problem flywheels or balancers have shifted.
8. Broken frame.
9. Stabilizer links worn or loose.
10. Rubber mounts loose or worn.
11. Rear fork pivot shaft nuts loose.
12. Front engine mounting bolts loose.
13. Worn out or broken universal joint on shaft drive models.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Husky SM610 Sudden Vibration
http://www.cafehusky.com/threads/610-counterbalancer-vibrations.23472
Husqvarna Motorcycle Parts Fiche Husky Part Numbers
Husqvarna SM 610 Workshop Manual
Husqvarna TE 610E Owner Manual

Jul 01, 2017 | 2001 Husqvarna SM 610 S

1 Answer

Whats the oil petrol mix for husqavarna 50cc 2 stroke


Mixtures and ratios are usually on the oil bottle. Does this bike not have automatic fuel oil mix tank system?

Oct 13, 2009 | 2003 Husqvarna SM 450 R

1 Answer

Service manual and spare part for Huaqvarna SM 450RR/2008


Hi,

All Hushy info can be downloaded FREE from the officiial husky site.
If you struggle, I will e-mail you a copy of all

Jon
dirtbikeservices@gmail.com

Feb 13, 2009 | 2008 Husqvarna TE 450

2 Answers

03 husqvarna sm450r oil change


Howdy, Mine is an 05 and it holds 1.4 qts. There is an overflow bolt on the same side as the filler plug. Down and to your right. Open it and fill until oil comes out. :)

Jan 04, 2009 | 2003 Husqvarna SM 450 R

Not finding what you are looking for?
2003 Husqvarna SM 450 R Logo

Related Topics:

485 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

choprboz5

Level 2 Expert

196 Answers

Joseph Hoffmann

Level 3 Expert

1709 Answers

Are you a Husqvarna Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...