Question about 1983 Honda XL 125 R

1 Answer

Honda xl 100 1982 wiring problem

My signals and horn are very weak, how does the electrical system work? I am proficient in household wiring and wonder if i can re run these circuits

Posted by on

  • www_anthony_ May 11, 2010

    did you check if the system charges the battery?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I ould start by checking the main engine ground, its a real possibility for your problem and always a good idea, if that does not solve it then i would clean the contacts in the horn button and turn signal control. be careful when opening this as the parts are small and can easily fall out of place

Posted on Jan 04, 2009

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 10865 Answers

SOURCE: honda xl 100 1982 wiring problem

As long as your battery has tested good, and it is fully charged, the next thing to look at is your electrical ground. Clean the battery terminals with some emory cloth and also shine up the ends of the battery wires that attach to the battery. Then trace the black and the red wiress to the other end and clean them with emory cloth. chances are that corrosion has made a connection poor resulting in subpar flow of electricity to your signals and horn. Once you have checked and cleaned the battery wires test and see how your signals and horn are working. If they are still weak then you need to open up the signals and the horn and clean up the connections there. get back and let me know how you make out. I know we can solve your problem.

Posted on May 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1982 honda nc50 has no brake, turn signils, horn ect


Hi, William for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Honda, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Wiring Diagrams Myrons Mopeds
http://vfrworld.com/forums/showthread.php/29448-No-Turn-Signals-No-Brake-Lights-amp-No-Horn-then-try-this-gt-gt-gt-gt-gt
No Horn No blinking turn signals in The Repair Shed Electrical Help Forum
http://www.jax184.com/projects/Express/Honda%20Shop%20Manual%20for%20NC50-NA50.pdf
http://www.vintagemopedsforsale.com/pdfs/honda-express-nc50-1978-owners-manual.pdf

Jun 23, 2016 | Honda Motorcycles

1 Answer

Sportster turn signal


Hi Anonymous, check wiring in switch housings and blown fuses. Good luck

Apr 01, 2014 | 2004 Harley Davidson XL 1200 C Sportster...

1 Answer

2004 Honda XL 125 V Varadero hi and low beam come on at the same time


Hi, Anonymous if your headlight is not working, only one beam works, keeps burning out, blinking, dim or surges from bright to dim to bright the first thing you need to check is the headlight bulb for damaged filaments then check your light circuit fuse, then check your head light bulb socket ground wire for a clean tight connection, that being said the usual suspects are:
1. Faulty ground or power supply wire to headlight bulb socket.
2. Worn down solder contacts or loose fit of the bulb base in the socket due to vibration.
3. Worn, chafed, or broken wires in the light circuit.
4. Corroded, broken, or loose pins/sockets in wire connectors.
5. Faulty hi/low beam switch.
6. Faulty ignition switch.
7. Fuse is good but no continuity on both sides.
8. Faulty headlight relay.
9. Faulty wiring between battery positive and headlight bulb socket.
10. Weak charging alternator/generator/lighting coil
11. Faulty voltage regulator/rectifier ground or overcharging.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Quality Headlight Horn Indicator 7 8 22mm Switch Fits Honda XL125 1000...
http://www.rg-racing.com/browsebike/Honda/Varadero_125
Honda XL 125 V1 Shop Manual
https://www.partsfish.com/page/oem-parts-for-honda
http://mybikemanuals.com/honda/227

Feb 25, 2013 | 2004 Honda XL 125 V Varadero

1 Answer

Fuse box for a 2002 harley davidson sportster


Hi Anonymous, 1998 and later Sportster models circuit breaker and fuses were located in an electrical bracket behind the starter relay and data link that was mounted behind the left side panel. 1997 and earlier circuit breakers only no fuses were located under the seat and for a free wiring diagram please visit the website below and good luck. Harley Davidson Wiring Diagrams and Schematics

Jul 24, 2012 | 2002 Harley Davidson XL Sportster 883

1 Answer

Electrical short, No headlight, no horn, no turn signals


may have burnt a wire inside the wiring loom, use multi meter to check each wire continuity, or perhaps jump a wire from + battery to the positive horn wire.
use a fuse on the jump wire in case of short.
If this work then definate break in loom

Apr 09, 2010 | Yamaha 1900 XV 1900 A Midnight Star

2 Answers

Turn signals dont work and niether does the horn or brake light


the acc fuse will be toast they on a 15amp. youll have one spare on the bike. change the fuse and your off.

Oct 03, 2009 | 2006 Harley Davidson XL 1200 C Sportster...

2 Answers

Electrical issue on 2005 Sportster 883


chec fuses-test them even tho they may look good-inspec starter relay-think there was a current overload -look over wireing for burns etc

Sep 08, 2009 | 2005 Harley Davidson XL 883L Sportster

2 Answers

Speedo, turn signals, brake lights, horn stopped working. All else is fine.


Gap your plugs to 38 thou. Check all your bulbs (one burned out will affect the rest) Take a look at all your fuses and make sure they are all ok. Otherwise you are probably looking at a wiring short which will require trouble shooting of the elctrical system. Buy your self a service manual for your bike, this will help you a lot.

Jun 03, 2009 | 2005 Harley Davidson XL 1200 C Sportster...

1 Answer

Honda xl 100 1982 wiring problem


As long as your battery has tested good, and it is fully charged, the next thing to look at is your electrical ground. Clean the battery terminals with some emory cloth and also shine up the ends of the battery wires that attach to the battery. Then trace the black and the red wiress to the other end and clean them with emory cloth. chances are that corrosion has made a connection poor resulting in subpar flow of electricity to your signals and horn. Once you have checked and cleaned the battery wires test and see how your signals and horn are working. If they are still weak then you need to open up the signals and the horn and clean up the connections there. get back and let me know how you make out. I know we can solve your problem.

May 27, 2009 | 1983 Honda XL 125 R

1 Answer

Electrical woes


make sure you have not crimped the wires when you changed the grips

Nov 20, 2008 | 2005 Harley Davidson XL 883R Sportster

Not finding what you are looking for?
1983 Honda XL 125 R Logo

Related Topics:

853 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...