Question about Motorcycles

Open Question

How to adjust the clutch on an 04 suzuki eiger 400cc

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3567 Answers

SOURCE: what battery fits 1995 suzuki intruder 400cc ***

Your best bet is to go to a Suzuki shop and get one there. That way you know for sure you have the right battery and that it will fit your bike.

Posted on Mar 26, 2009

  • 149 Answers

SOURCE: '06 Suzuki Eiger ATV will not start. When pushing the

Try shorting out the 2 10mm nuts on the starter relay (has the lead from the battery and starter going to it) if the the engine turns over chech the relay or safety switches. It will flash so make sure the is no open fuel. If nothing happens try tapping the starter motor l(lightly) then try it. If this works the brushes in the starter are worn out..Dont keep on doing it as you will burn the comutator in the starter..Brushes are cheap.

Posted on Jul 03, 2010

19ken55
  • 426 Answers

SOURCE: Just had the motor rebuilt

Adjust the idle to correct RPM say 900 or so.

Posted on Jan 27, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I got a 2005 Suzuki eiger 400 I was riding and a


its bent, stripped or broke the gears inside. not an easy repair.

Oct 12, 2014 | Suzuki 2005 Eiger Automatic 400 4X4

1 Answer

Where do i find clutch,throttle, and brake cable for 16inch ape hangers?


Look on EBAY and join volusiariders.com someone there will have the answer or may have one available

Sep 02, 2014 | 1988 Suzuki LS 650 Savage

1 Answer

How to remove centrifugal clutch


You need c clutch puller.See a dealer thier cheap.

Aug 15, 2014 | Suzuki 2006 Eiger Automatic 400 4X4...

1 Answer

Why would suzuki forenza stall at a stop


Turn the ignition and start the Suzuki Eiger. If the engine has difficulty starting or will not start at all, there may be a problem in the electrical or starting system. Remove the spark plug wire from the spark plug and remove the spark plug from the engine using a spark plug wrench. You can replace the spark plug or use a wire brush and gap tool to clean and re-gap the spark plug. Insert and tighten the spark plug, reattach the spark plug wire and try to restart the engine. Remove the battery cables from the battery and attach a battery meter to the battery. Observe the amount of charge the battery is holding and if the meter has a test feature, test the battery to see if it will dispense the correct amount of power. Clean the battery contacts with a wire brush and reconnect the battery cables. Check the oil, gas, transmission and brake fluid levels on the Suzuki Eiger. If there is not enough gas in the ATV, it will not start. Checking the fluids regularly to see if there are any leaks or if any of the fluids are dangerously low. Top up any fluids that may be low before you use the ATV. Adjust the fuel idle mixture screw on the Suzuki Eiger's carburetor if the engine is running rough. Inspect the air intake and exhaust pipe for the Suzuki Eiger. Any blockage in or on these components can affect engine performance. OBD2 PROMOTION FindOBD2 com

Aug 15, 2014 | Cars & Trucks

1 Answer

I have an 04 Suzuki Eiger 400. Smokes a lot when first started but subsides a little after running. Im thinking piston rings but would like any other feedback before tearing the top end apart


sounds like piston rings, if rings are in bad shape,will be at its worst when cold then will get better when it warms up. Should be some power loss as well. pretty easy rebuild. good luck

Apr 13, 2014 | Suzuki 2004 Eiger 400 4X4 Manual

1 Answer

Adjusting clutch


I have a Suzuki Eiger 400 4x4 and the shifter is sticking in gear! How do I solve this problem?

Jan 09, 2014 | Motorcycles

1 Answer

Bogs under a load or climbing hills


Its an automatic, so im guessing its belt driven. Possibly worn belt/pully's/clutch.

Jul 09, 2013 | Suzuki 2007 Eiger 400 4X4 Automatic

2 Answers

My 2007 suzuki Eiger 400 4X4 will not move when shifted into gear forward or reverse


if its a CVT the belt might be broke or worn. If a manual then it could be the centrifugal clutches

Apr 14, 2013 | Suzuki 2007 Eiger 400 4X4 Semi-Automatic...

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

388 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...