Question about 2008 Suzuki B-king

1 Answer

Reset/change the maintace intervals

I followed the owners manual book but it did not work! help!

Posted by on

  • bk2008gti07 Jan 04, 2009

    it worked. thank u for your assistance.



    the owner's manual does not differentiate ignition from ignition switch.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 254 Answers

To reset the m on the display press the info button on the tank to bring up the maintenance interval then turn the ignition off.

while holding the set button (on the tank) down turn on the ignition the interval should be set to the next oil change (6000K's)


hope this helps

Posted on Jan 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How reset oil change light 2011 charger


Your vehicle is equipped with an engine oil change
indicator system. The "Oil Change Due" message will
flash in the EVIC display for approximately 10 seconds
after a single chime has sounded to indicate the next
scheduled oil change interval. The engine oil change
indicator system is duty cycle based, which means the
engine oil change interval may fluctuate dependent upon
your personal driving style.

Unless reset, this message will continue to display each
time you cycle the ignition to the ON/RUN position. To
turn off the message temporarily, press and release the
MENU button. To reset the oil change indicator system
(after performing the scheduled maintenance), perform
the following procedure:

1. Without pressing the brake pedal, push the ENGINE
START/STOP button and cycle the ignition to the ON/
RUN position (Do not start the engine.)

2. Fully depress the accelerator pedal, slowly, three times
within 10 seconds.

3. Without pressing the brake pedal, push the ENGINE
START/STOP button once to return the ignition to the
OFF/LOCK position.

NOTE: If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.

Source: Owner's Manual page 293

Dodge Charger Owners Manual

Oct 04, 2013 | 2011 Dodge Charger

1 Answer

Reset oil change indicator on 2011 Dodge Charger


Your vehicle is equipped with an engine oil change
indicator system. The "Oil Change Due" message will
flash in the EVIC display for approximately 10 seconds
after a single chime has sounded to indicate the next
scheduled oil change interval. The engine oil change
indicator system is duty cycle based, which means the
engine oil change interval may fluctuate dependent upon
your personal driving style.

Unless reset, this message will continue to display each
time you cycle the ignition to the ON/RUN position. To
turn off the message temporarily, press and release the
MENU button. To reset the oil change indicator system
(after performing the scheduled maintenance), perform
the following procedure:

1. Without pressing the brake pedal, push the ENGINE
START/STOP button and cycle the ignition to the ON/
RUN position (Do not start the engine.)
2. Fully depress the accelerator pedal, slowly, three times
within 10 seconds.
3. Without pressing the brake pedal, push the ENGINE
START/STOP button once to return the ignition to the
OFF/LOCK position.

NOTE: If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.

Source: Owner's Manual page 293

Dodge Charger Owners Manual

Oct 22, 2012 | 2011 Dodge Charger

1 Answer

Need to reset the button for the mileage the perform service keeps coming on


The shop service manual is rather vague on this subject.
It says that you must select "Service Interval" and once in the service interval display, the interval can be changed by pressing the "Step" button.
The "Reset (Yes/No)" display only becomes available when the service interval is changed.
It doesn't explain where these buttons or the display is located.

This proceedure is probably better explained in the Owner's Manual.

Nov 28, 2010 | 2005 Jeep Liberty

1 Answer

If I use synthetic in my primary how often should it be changed?


You may want to follow the standard changing intervals just so it is easier. With synthetic oils you will benefit from better lubrication, cooler temperatures, longer transmission life, and if you desire longer intervals between changes. You could just change as needed shorter intervals city driving and much longer intervals highway driving , much like motor oil. Or set a longer interval to follow for the transmission change. The manufacturer usually gives you recommendations in the owners manual , unless you keep a chart it is just easier to follow that recommendation. Besides, oil is cheap compared to your bike. More changes are always better than less changes.

Sep 16, 2010 | 2006 Harley Davidson FLHR Road king

2 Answers

How many kilometers before change the transmission oil of ford f-150 2006


The best thing you can do is look in you owners manual and look up service interval and look up you vehicle under rough service and follow the guide

Jul 28, 2010 | 2006 Ford F-150

1 Answer

WHAT DOES IT MEAN WHEN YOUR PERFORM SERVICE LIGHT COMES ON? I JUST BOUGHT MY JEEP USED AND DID NOT GET A BOOK WITH IT,


this is a service reminder and can be reset by you, it refers to regular maintenance intervals the are recommended by the manufacturer that can be found in the owner's manual such as oil changes, air filter replacement, tune-ups etc., depending on the mileage of the vehicle. to reset, try this procedure. hit step button until console reads 0 miles to service. than hold down the reset button until display resets miles.

Mar 30, 2010 | 1998 Jeep Grand Cherokee

2 Answers

When do i need to change oil


Most all GM cars and trucks, Now have a Smart Oil Life Monitor System. Your Oil Life Quality (not quantity) is now determined by the Car's on board computer. By your driving habits, speeds, temperature, distance, time, etc. Your Car's computer knows when the Oil is 'worn' out and needs changing. Read the fine print in owners manual for how to reset it. GM owners manuals are available Free online, for reading or printing. Free, Free. Now you still have to pull the dip stick and check the oil level every tank of gas of so. The computer won't do that for you.

Jul 03, 2009 | 2008 Chevrolet Uplander

2 Answers

2006 ford exsplorer oil light did not go off after a oil change.


In the owners manual, you will find reset procedures.

I found this for ya, hope it helps!

Please Rate!

Oil Change Reset
A press of the OIL CHANGE RESET switch will allow you to
reset the oil life feature to 100% (or your Personalized Oil Reset
Percentage). After you have the oil changed, you must execute
the following procedure. Press the OIL CHANGE RESET switch
and hold for five seconds as the M/C counts down for five
seconds. After a successful reset the Message Center will display
“OIL LIFE RESET TO 100%.” If you have established a
Personalized Oil Reset Percentage, the display will show that
percentage instead of 100%. To ensure accurate oil life
indicators, perform this reset procedure only after an oil change.
Your Personalized Oil Reset Percentage allows you to establish a
smaller oil change interval than the manufacturer’s
recommended interval. To establish your Personalized Oil Reset
Percentage perform the following procedure:
1. Press and hold the OIL CHANGE RESET switch and press
the RESET switch while the display is still counting down
the 5 seconds to reset. The display will change to “START
OIL LIFE AT XXX%.”
2. Press the OIL CHANGE RESET switch until the displayed
percentage is the Personalized Oil Reset Percentage that you
desire. Your choices are 100%, 90%, 80%, 70%, 60%, 50%,
40% and 30%.

Mar 03, 2009 | 2006 Ford Explorer

4 Answers

2008 Scion TC Warning Light


This is already covered in the owner's manual, but here it is again as a quick reference.

Every 5,000 miles, a "Maintenance Required" light will blink for the first couple seconds after you start your car. It will continue to do so until it is reset. If it is not reset, than it will eventually turn on your "Check Engine" light. The purpose of the maintenance required light is to remind TC owners to change their oil. The factory recommended interval is 5,000 miles, but you can reduce the interval the light will come on to a mileage interval of your choice.

1. Before starting, make sure that the odometer is not on one of the trip mileage odometers but is displaying the standard odometer.

2. With the car off, press and hold down the odometer reset button. While still holding it, start the car.

3. The light should continue to blink for a couple seconds and than disappear. That will reset the light for another 5,000 miles.

4. The following are steps to change the interval in which the maintenance required light comes on. Right after you turn on the ignition while holding the reset button, you'll notice that the odometer display will show 5 bars. Each bar corresponds to a 1,000 miles. As each bar disappears, the interval will increase (0 bars = 5k, 1 bar = 4k). Release the reset button at the interval you desire.

Jan 23, 2009 | 2008 Scion Tc

1 Answer

Can't change fm intervals...


Im not sure if this feature is available as i looked in the owners manual and thats also available here for free if you want it. I would sugest you look at the JVC website as I said I didnt see it in the manual.. Good Luck http://www.jvc.com

May 13, 2006 | JVC KD-G200 CD Player

Not finding what you are looking for?
2008 Suzuki B-king Logo

Related Topics:

2,429 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4497 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...