Question about Suzuki Motorcycles

1 Answer

My 2007 gsxr 600 braklight keeps burning up the leds and the brake light doesnt work but the running light and turn signals work fine

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

  • Expert
  • 39 Answers

U need a resistor something to reduce the power ur board in the light shuld have one built in it may have gone leds run on typicaly around 3v ur bike produces between 12 and 14 v its the same as when u fit led indicators u need to restrict that power down

im asumeing the brake light dont work because the leds are dead not because there is no power to them

best advice i can give is u need a in line resistor similar to the ones used on led indicators they take away some of the power and release it as heat energy with the decresed current the leds shuld be almost just as bright and last a lot longer hope this helps

Posted on Oct 30, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What will make the back running lights not work but the turn signals do and the brake light don't work from the foot pedal but does work from the hand lever on a 2006 1200 sporster


Normally, on most Harleys, the rear turn signals are just that, and not running lights.
If yours DID function as running lights as well as turn signals, then check the bulbs.
If they're incandescent bulbs and not LEDs, they should have 2 elements, and 1 of the elements might be burned out.

As far as the brake light not working from the rear brake pedal, it might be the switch itself, or a wire could have came unplugged.

May 12, 2014 | Harley Davidson XL 1200 C Sportster Custom...

1 Answer

No problem. i have a chance to buy a 2007 600 gsxr with 2500 miles in what appears to be emaculate condition for 4000.00. i wanted to find out if there are any major flaws that will make this bike come...


The biggest difference is that the 2007 GSXR 600 has fuel injection instead of carbs. The FI symbol will alert you that the sensors on the Fuel Injection system have found a problem. When that happens, a dealer will be needed to hook up a code reader to see what the problem is. A dirty air filter is something you can fix. A fuel mapping problem is for the dealer to fix. Minor FI problems still let the bike run. Major problems shut down the fuel system so the engine will not even start. Other than that, just be sure the bike shifts smooth and easy and that all electrics and brakes work properly. How old is the battery? How much life is left in the chain? Does the clutch operate properly? How soon before new tires will be needed? I hope this helps. Please rate my answer.

Apr 16, 2011 | 2007 Suzuki GSX-R 600

1 Answer

I've got a 2007 GSXR 600 with 7454 Miles which I'm looking to sell. It's had a service at 561 miles but i've just noticed that it hasn't had the 4,000 service. Will this effect the price dramatically?


NO. I've never personally had a suzuki gsx-r but as long as it is in good running condition, its not leaking any fluids, has good tires and brakes, and doesnt look crappy, the 4000 mile suggested maintnence wont effect the price. Good luck with the sale!

Jul 07, 2010 | 2007 Suzuki GSX-R 600

1 Answer

2007 gsxr headlight went out...all other lights work,


Low beam switch may be bad. use a meter to check for power to lowbeam side of lamp. cleaning with electrical contact spray may help.

May 05, 2010 | 2007 Suzuki GSX-R 600

1 Answer

Drivers side tillight do;s not work but braklights do how do i fix it


You have a 2 filliment bulb,only the low filliment is burned or broken. This allows both the blinker and the brake lights to work but you have no parking or running light. Change the bulb, should be ok,

Apr 27, 2010 | 1998 Ford Windstar

1 Answer

Everything eletrical shut off


could well be..check the fuse's in the fuse box...its under the seat

Mar 06, 2010 | 2002 Suzuki GSX-R 600 M

1 Answer

My 2004 gsxr 600 turn signals don't work. I have led break light and led rear turn signals. The stock front turn signals are currently off the bike but even when I plug them in they still don't work. Also...


have you changed the flasher relay to run led indicators if not you will need to you cant run standard bulb indicators and led together. and with the brake like sounds like pulling on the cable when on lock causing switch to stay on check that location of the wiring is correct and sufficient freeplay

Nov 23, 2009 | 2004 Suzuki GSX-R 600

2 Answers

Suzuki k6 turn signal and park light dont work .but head light and brake light still does


This is either a ground issue or 2 separate problems. Check the tail bulbs there should be 2 filaments in them unless they are LED. In the case that they are led Check the grounds and the fuses.

Jul 07, 2009 | 2008 Suzuki GSX-R 600

1 Answer

Burning Tail Light 999


I've heard that using plate re-locators and after-market exhausts can cause vibration that'll break the filaments in the bulbs. I just had a turn signal go out this morning. The (very standard and readily available) model 5008 is the direct replacement for the turn signal bulbs and a 2-pack at the auto store (Autozone, etc) is $1.75 or so. 12 volt, 10 watt. There are LED replacements for them that won't break, but since the stock bulb is 10 watts, you'd be hard pressed to find an LED bulb that puts out that brightness. If you go LED, you also have to make sure it has a resistor built in. LED bulbs intended for turn signal use have them, ones for brake lights etc don't. PS: I think the brake/ running light bulb is an 1157, dual filament. I haven't had to replace that one yet though so I'm not sure, check it first!!!

Nov 20, 2008 | 2006 Ducati 999 R Xerox

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...