Question about 1990 Honda CBR 250 RR

1 Answer

Cam timing marks on 1990 Honda CBR 250 RR

I had cams out and need to know their positions of marks on cam cogs@

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Honda Master
  • 43,050 Answers

Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Cam timing marks on 1990 Honda CBR250RR Google Search
Mc22 timing marks
1986 1999 Honda CBR250R CBR250RR Service Manual Moto Data Project
https://www.partsfish.com/page/oem-parts-for-honda
http://www.hondampe.com.au/docs/owning_a_honda/owners_manuals/motorcycles/CBR250R-RA%2032KYJE000.pdf

Posted on Nov 05, 2017

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 3567 Answers

SOURCE: need to know positions for cam and crank

Go to this site and you can download a free PDF service manual.
www.carlsalter.com/motorcycle-manuals.asp Almost all of the manuals are in English but some are not. There is no way to be sure without doing the download. You can always delete it if in a foreign language. You didn't say what year your bike was but the site has them for multiple years. Just get as close as you can and you will be fine since the proceedures don't change.

A “very helpful” rating for this answer? Thanks! < And it doesn’t cost anything either!

Posted on Jun 30, 2009

SOURCE: need to know were timing

I would highly suggest a picture to help you in this endeavor, if off it will make the components collide with catastrophic results posssible and bad outcome assured at best.
A manual or if unavailable, Google the net for pictorial, the required info may not be described well enough to actualy tell you what you need to hear by looking at what youre seeing.

Posted on Nov 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1.6 LITER TIMING MARKS


g16a or b
the cam cog mark is at 12pm matching the same mark
at the back 12pm tins at rear of cam cog.
this mark is TDC #4 firing, number four.
pick 8v or 16v engine.
http://www.fixkick.com/t-belt/tbelt-index.html#Tbelt-main

documented 3 ways, by page new page, by FSM and by instruction sheet that came with all new belts (GATES)

the cam cog has 2 false marks, do no use them
use all E marks. 16v and see 8v for its false marks too.
1995 had 2 engines, 2 EFI and 2 heads. as an option.
fact. G16A or B.

Jun 29, 2014 | 1995 Suzuki Sidekick

1 Answer

I need the timing marks foe a 1999 elantra 1.8


hi from uk the cambelt timing marks at TDC are as follows--the crank gear mark is lined up with mark on front of engineblock at approx 10-30 am position the marks are clear as you look ? the cam coghas a dot/pop mark just below teeth this mark is at top ie 12-0'clock position now on cam cog you will also see s hole drilledon the cog web also at 12-o/clock if you look thro this hole (use a mirror ?) the hole lines up to a grooved vertical line at the rear which is on front of engine at this point you fit belt fron crank pully anti clockwise round cam cig then reset tensioner when marks are rechecked with belt fitted/tensioned ? turn engine manually two full rotations clockwise then recheck all mark line up again ? then re assemble ? c/shaft pully bolt tightens to=170-180 Nm hope you notice that the new belt is marked as to its rotation with arrows hope this helps ?best wishes from uk

Mar 11, 2010 | Hyundai Motor 1999 Elantra

1 Answer

Can you tell me the cam timing for mk 1 renault clio 1.4 m reg thanks petrol 1994


the cambelt timing marks for clio 1.4 are = the crankshaft cog alignes withmark at 6 o/clock position at TDC No 1 cyl and the cam cog alignes with mark on cyl head at rear of cog at 12 o/clock position belt is fitted anti clockwise from crank then w/pump and then cam cog hope this helps ?

Jan 13, 2010 | 1986 Renault Sport

1 Answer

Need to know timing marks when replacing timing belt on 1.6L hyundai


turn engine to TDC No1 cylinder at this point the cam cog has a hole drilling which should be at 12 o/clock position and alignes with a V notch on the cyl head as you look thro the cam drill/hole and when crank pully is at TDC the cog has a marked tooth which should align with mark on engine approx 12-30 pm position these marks are all clear to see and belt change takes around TWO AND HALF HOURS to do

Dec 18, 2009 | 2001 Hyundai Accent

2 Answers

Changed the water pump on my 1997 passport & now the timing is off.


I assume you are talking about valve timing not igntion timing. If that is the case your water pump maybe run by the timing belt. If it is you would need to completely disassemble the timing cover and set the number one cylinder to TDC (top dead center) on the Compression stroke not the exhaust stroke. Once you do that line the timing marks up on cam gears with marks on the side of the head. Then install a new timing belt and tensioner. It is a good idea to always change the pump and belt together. I would suggest buying a manual for your specific vehicle for specific torque specs and exact locations of components and procedures.

Dec 03, 2009 | 1997 Honda Passport

1 Answer

Need to find timing marks for camshaft on 2002 hyundai sonota dohc


hi from uk the camshaft marks at TDC should be both cams at 12o/clock positions in line with pointer on on rear of cams on engine? the crankshaft at TDC marks lined up at approx 11 o/clock thebalance shaft/cog must also aligne with marks on cog and engine these are at 9 o/clock position ? the oil pump cog also is market to aligne with engine mark on engine at approx 11 o/clock all above is prior to fitting new belt+tensioner hope this helps ? best wishes from n/west uk

Nov 08, 2009 | Hyundai Sonata Cars & Trucks

1 Answer

I need to know the timing points


hi from uk the marks i assume are the timing belt marks ?? to st up turn engine to T D C number 1 cyl fire check the cam cog and view the hole in the cg is at top and the vertical line mark on cam bearing cap are lined up along with the crank mark which should line up with the point on engine this mark is approx at 11 o clock position when viewed if not rotate engineanother rev till both marks line up release tensioner (renew it !) fit new belt from crank anticlockwise to cam then round tensioner push tensioner against belt firmly and torque 43-55 Nm turn engine by hand till marks re aligne ok ?check tension ? ok ? torque crank pully bolt 170-180 Nm reassemble engine hope this helps ?

Nov 01, 2009 | Hyundai Motor 2003 Sonata

1 Answer

I need to know where the timing marks are on a 2002 dodge intrepid with a v6 motor.


the timing marks are located on all four cam cogs and the crank cog. there are also timing marks on the chain itself. there are three gold colored links on the chain. these corospond to the three cogs. good luck.

Sep 01, 2009 | 2002 Dodge Intrepid

1 Answer

Fitting cam chain after replacing piston/rings.


Here's the deal > the chain position on the crankshaft cog makes no difference. No timing is done on that end. The timing is done when mounting the chain on the OHC. Run the piston up to TDC. Put the cam in a position where the cam lobes are pointing downward. Look at the cam gear. There should be two marks on one side of the gear. You should be able to see the marks from the left side of the engine. The cam is in time when the marks are parallel with the top gasket surface of the head and the gear is bolted to the cam. Now you have TDC compression stroke (good). If the cam lobes were pointing upward you would have TDC exhaust stroke (bad). Just to help you a bit in the future, I have a web site below where you can see a parts fitch for your specific bike.

You will select the actual brand, year, model, etc., once you go to the site. Part numbers and prices are also shown. You can order parts from this site. In the event no price is shown on a particular part, the part is not in stock.
www.babbittsonline.com/pages/parts/viewbybrandand/parts.aspx

Post a comment if you need to get back to me.
Please top rate this solution. Thanks!

Jun 06, 2009 | 2002 Honda XR 200

1 Answer

Fitting of new cam belt


bring numb 1 piston up to top dead centre on cam cog should see dots on wheel an one on engine

Dec 11, 2008 | 1996 Ford Escort 4 Door

Not finding what you are looking for?
1990 Honda CBR 250 RR Logo

Related Topics:

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...