Question about 2007 Yamaha DT50X

1 Answer

I got yamaha DT50 sm 53 plate, is there a manual for this and what are the gears(1down, 4up?)

I cant find no info on this bike, plate is 53 registered start 2004

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Yamaha Master
  • 42,951 Answers

Hi, Clive the vast majority of service, parts, and owners manuals on the internet are "FREE" to download and all service manuals contain wiring diagrams in the back pages. The rest usually charge a modest fee around $10 sometimes more and there is a handful of obscure, rare, obsolete, and very old models that are no longer or never were available, then there is eBay where you may be able to find what you need at a very high price because of its age and rarity. Most of the "FREE" manuals will cover your exact make, model, and year otherwise one will be provided that comes as close as possible to your bike and will have most of the same info that an exact manual would have. To download your manual please click on the links below. Good luck and have a nice day.
Yamaha Motorcycle Manuals
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-dt

Posted on Feb 06, 2017

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
goofduck
  • 490 Answers

SOURCE: '95 Yamaha YZ 125 clutch - stays in gear when clutch is pulled in

the plates will stick to each other because of oil
check the clutch lever at the motor and make sure it is moving the arm that pushes the pressure plate and make sure it is moving

Posted on Apr 15, 2009

  • 4 Answers

SOURCE: dt50 2004 engine dies after a couple of miles.Will

you should check the cooling system if you don't have one then your gonna have to deal with it unless its something else its a different problem but that happens to my 3 wheeler that has no cooling system

Posted on Apr 27, 2009

  • 200 Answers

SOURCE: Yamaha DT50 MX Kickstart doesn't work

i assume the MX is a 2 stroke engine ! Those can be tough at the best of times but let's get it going 1st...This is a tiny lite bike sooo,turn igntion on, shift into 2nd gear and push that little devil until she pops sputters and starts. Now only use premium gas, clean spark plug regularly and use a premium oil, don't overmix....run that baby out in the field for an hour to clean her out...good Luck to you friend...Tim

Posted on May 14, 2009

  • 8404 Answers

SOURCE: how do youfind a serial number on a yamaha 125 dirt bike 2004

Should be stamped on the neck of your motorcycle or on the left hand side lower rail. Look on the neck, right side, under the dirt.

Where is the neck? It is the place where the front wheel assembly is fastened to the rest of the motorcycle.

Thanks for your interest in FixYa.com

Posted on Feb 20, 2010

ckoira57
  • 267 Answers

SOURCE: the only info I have is that it is a yamaha

5V1 is 1982 SR 250 J http://www.cmsnl.com/yamaha-sr250j-1982_model8871/partslist/.5aff3e5.jpgThis link will give you specifications and complete bike in exploded view diagrams. Pic courtesy bikepics.com. Cheers.

Posted on May 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My clutch is slipping,my bike want even pull itself. Someone told me to change my slave cylinder first befor I tear into the clutch plates,so would the bike even go into gear if the slave cylinder is


clutch plates need replacing , I would replace the steels as well and also change the oil and filter as it will be polluted with clutch dust.
Would also help to flush clutch fluid as well.

Mar 19, 2014 | 2004 kawasaki VN 1500 Vulcan Classic...

1 Answer

Engine shaking when stopped 53 plate megan


Megan, Please we need INFO on your car year, make, engine, miles on car, transmission automatic or manual !

Feb 09, 2014 | Chevrolet Malibu Cars & Trucks

1 Answer

Fzr 600 wont start


What is the condition and age of the battery? I would start with charging it and checking for holding the charge first if unsure. Then check for other suspects like starter relay/solenoid or starter itself.

Nov 21, 2013 | Motorcycles

1 Answer

I need wiring digram for lights front and rear lights /plate light


Go to Autozone.com site and register your vehicle for free wiring diagrams to download.

Please rate my info.

Nov 13, 2012 | 2004 Kia Sorento

1 Answer

My vehicle has this option but the fuse or relay #49 is missing. The blade fuse #53 is there.


That info is in the owners manuals. If you do not have the owners manual you can download one free HERE after you register at the GM site.

Nov 08, 2012 | 2004 Chevrolet TrailBlazer

2 Answers

I bought a yz250(1984) with-out ownership, to have ownership I must have the vin number but there are 4 numbers missing where the clutch cable has worn them away over the years, would there be another vin...


Can't you "forget" about ownership and just ride the bike without a title? After all, you bought it that way. Some states have a "rebuilt from parts" option for bikes and cars. Check with the state and see if you can get title that way. The 10th digit would be "E" if the bike is a 1984. The 9th digit is the key. It is a verification digit tied to a mathematical formula using the prior 8 digits. Any chance the vehicle division in your state could run the existing license plate and locate the needed info that way? How about the registered owners contact info? Yes, I know how freaky the state can be when asking for information. Probably the best thing to do if you must have a title is to go to a cycle junkyard and buy what is left of a YZ250 that has a title and then use that frame, or at the least, re-number your frame to match the junkyard bikes title.

Mar 13, 2011 | Yamaha YZ 250 Motorcycles

1 Answer

Have to hold clutch to keep bike from dieing


clutch plate adjusment or cable adjustment, it sounds like the clutch is staying engaged, try loosening the cable on the clutch until there is lots of slack init and try to start the bike, if it jerks forward then you are going to have to adjust/replace the internal clutch plates hope this helps

dan

Mar 11, 2010 | 2004 Triumph Daytona 600

1 Answer

Thought i burnt the clutch out on my wr,at a recent t and t,the bike wouldnt move when in gear with the lever released,so i replaced the clutch plates and oil,i can start the bike ,put in gear,when i let...


Please pardon my response if it is too simple, but did you correctly align the pressure plate (Center part that tops the clutch plates and has springs bolted through it.) with the inner clutch basket (the part inside the clutch basket that the pressure plates spline onto)? If this is not aligned, the pressure plate will not fully engage the clutch plates. Both parts usually have an indicator mark that shows proper alignment.

Nov 09, 2009 | 2004 Yamaha WR 450 F

1 Answer

2004 chevrolet trilblazer


There is a plate underneath the engine that is held in by 2 flat head screws. All you have to do is loosen both screws and slide the plate around. The plate just slides around. The drain plug and oil filter are then exposed and easily accessable. The 2004 Trailblazer takes 7 quarts of oil and uses an ACDelco PF61 or Fram PH3675 oil filter. I've read in this FAQ site some info about other filters, so I went down to the local Chevy dealer and talked to a mechanic. He told me the ACDelco PF61 was the correct filter. The Fram PH3675 is the exact same as the PF61.

Mar 31, 2009 | 2004 Chevrolet TrailBlazer

1 Answer

Cant get off road tyres for beta supermtard 4.0 2004 rim size


best way to find a wheel would be go to race meetings and ask around ! take bike with you !! or you mite get a small rear tyre off a junior crosser to fit ! ? .. not really set up for offroad !

Feb 22, 2009 | 2004 Beta Motard 4.0

Not finding what you are looking for?
2007 Yamaha DT50X Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...