Question about Motorcycles

Open Question

Dunlop z10 treadmill stop working

Stop working/shuts down after a few seconds, and does not start again for a while.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 38 Answers

SOURCE: Microwave works for a few seconds and then the lights and turn table inside shuts off.

hi the light and turntable work of a common relay located on main pc board.relay probably dry jointed or sticky or check switches behind door catches

Posted on Feb 27, 2007

Ad
MicrowaveSvc
  • 9047 Answers

SOURCE: Samsung MU3250W Shut down

It could have been steam or humidity.

If this is an over the range model, be sure you always use the hood vent exhaust fan when you're cooking on the stove top.

Whether it's a counter top or over the range top, always be aware that the cooling fan is running when it's cooking.

When in doubt feel for air flow through the vents.

Good luck.

Posted on Oct 19, 2008

wigginss80
  • 11 Answers

SOURCE: treadmill shuts off in about 60 seconds.

try calling the techinal number tell them the problem and they should be able to help u

Posted on Jul 10, 2009

co7196
  • 3433 Answers

SOURCE: 1994 Heritage, riding and all the sudden shuts off.

Is the bike key yhe only key? or do you have bunches of keys on the ring? The connector sounds like it's messing with you.. I doubt it's the ignition itself. Check the wiring connectors coming from the ignition switch and the any wires running under your but, Just in case your bouncing got one that was run between the seat and something that would hurt it. (the wire) not your ****. Good Luck.

Posted on Jul 25, 2009

vinzen
  • 217 Answers

SOURCE: aprilia mx50 will kick over then stop after 5

If your bike starts even for 5 seconds you should investigate your fuel delivery system.Check fuel pump,filter,try spray carb cleaners like Gum Out.Most importantly make sure your choke is working.You got your ignition (spark) it is most likely fuel related.Good Luck.

Posted on Sep 19, 2009

Testimonial: "Thanks will try, did speak to bike mechanic he said might be the barrel, wot do you think"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tread climber starts up and shuts down in a few seconds. Starts clicking


Bowflex Treadclimber Shuts down - Questions - Fixya

www.fixya.com > Forum > Treadmills > Bowflex > Bowflex Treadclimber
Bowflex Treadclimber, shuts down related issues. ... After a few times of shutting down due to the heat. Ad ... It shuts down about 60 seconds after it starts.

Customer Reviews: Bowflex TC3000 Treadclimber

www.amazon.com/Bowflex...Treadclimber/.../B000B...

Amazon.com, Inc.The second time I used it I slowed down the speed and worked on getting the ... After researching the TreadClimber for over a year (the cost was a big factor .... We were never able to make the treadles go up and down more that a few inches. ..... a great workout However it continually shut offs while working out and Bowflex ...

Comments for Bowflex TreadClimber Problems

www.treadmilltalk.com/bowflex-treadclimber-user-comments-comments....
Oct 30, 2013 - NOTE: My comment about Bowflex Treadclimbers is also one I left in another area. ... seems like no one sprung the extra few bucks to pay for someone to put the ... In my case , after the initial startup, the machine stops EVERY time at ...nearly spine snapping shutdown at exactly 32 minutes after starting. 5.

[PDF]Bowflex® TreadClimber® 1000, 3000 & 5000 - Nautilus

download.dfxi.com/.../SM/Bowflex/BFX_TC135_SM_RevA_web.pdf

Jan 27, 2016 | Bowflex TreadClimber TC10

1 Answer

Incline stuck at 12


please follow this steps and fix it. Merry Christmas
1 )Locate the reset switch on the underside of the treadmill console. Usually the button is large enough to trigger with a pencil eraser or Q-tip. Plug the treadmill plug back into the wall. Use the Q-tip to press the reset button. It may be necessary to hold the reset button down for a few seconds. "CL11" will appear in the display of the treadmill. ·2
Press the reset button one more time with the Q-tip. "CL21" should appear on the screen. Press the enter key. The display will change again and show "CL22." Keep pressing the enter key until the numbers cycle through to the number "CL26." Press enter one more time. The letter E should appear on the display screen.
·3
Press enter twice more. The letters "SS" should appear on the screen. When this happens, press the start/stop key. Making sure to keep well away from the tread, press enter to start the treadmill. The treadmill will start on its own. The treadmill will stop on its own after a few seconds. When it stops, press the power key two times. Remove the safety key and put in a safe place. Your treadmill is reset

Dec 18, 2013 | Nordic Track NordicTrack - E 7.5

1 Answer

Keeps asking me select user, then it restarts again


Reset it. and follow this steps and fix it. God bless you
1 )Locate the reset switch on the underside of the treadmill console. Usually the button is large enough to trigger with a pencil eraser or Q-tip. Plug the treadmill plug back into the wall. Use the Q-tip to press the reset button. It may be necessary to hold the reset button down for a few seconds. "CL11" will appear in the display of the treadmill. ·2
Press the reset button one more time with the Q-tip. "CL21" should appear on the screen. Press the enter key. The display will change again and show "CL22." Keep pressing the enter key until the numbers cycle through to the number "CL26." Press enter one more time. The letter E should appear on the display screen.
·3
Press enter twice more. The letters "SS" should appear on the screen. When this happens, press the start/stop key. Making sure to keep well away from the tread, press enter to start the treadmill. The treadmill will start on its own. The treadmill will stop on its own after a few seconds. When it stops, press the power key two times. Remove the safety key and put in a safe place. Your treadmill is reset

Dec 09, 2013 | Horizon T203 Treadmill

1 Answer

Why is facebook not working


You must reset the treadmill, and see if you have Internet and if your router is working o.k
God bless you
Instructions 1.
    • 1
Unplug the treadmill. Locate the console key and place the safety or reset key into the treadmill console. Replace any parts that need replacing, or is large enough to trigger with a pencil eraser or Q-tip. Plug the treadmill plug back into the wall. Use the Q-tip to press the reset button. It may be necessary to hold the reset button down for a few seconds. "CL11" will appear in the display of the treadmill.
    • 3
Press the reset button one more time with the Q-tip. "CL21" should appear on the screen. Press the enter key. The display will change again and show "CL22." Keep pressing the enter key until the numbers cycle through to the number "CL26." Press enter one more time. The letter E should appear on the display screen.
    • 4
Press enter twice more. The letters "SS" should appear on the screen. When this happens, press the start/stop key. Making sure to keep well away from the tread, press enter to start the treadmill. The treadmill will start on its own. The treadmill will stop on its own after a few seconds. When it stops, press the power key two times. Remove the safety key and put in a safe place. Your treadmill is reset.move on to the next step.
    • 2
Locate the reset switch on the underside of the treadmill console. Usually the button

Nov 13, 2013 | Exercise & Fitness

1 Answer

I cannot see You Tube on my I Pad


reset the system and try again.God bless you
    • 1
Unplug the treadmill. Locate the console key and place the safety or reset key into the treadmill console. Replace any parts that need replacing, or is large enough to trigger with a pencil eraser or Q-tip. Plug the treadmill plug back into the wall. Use the Q-tip to press the reset button. It may be necessary to hold the reset button down for a few seconds. "CL11" will appear in the display of the treadmill.
    • 3
Press the reset button one more time with the Q-tip. "CL21" should appear on the screen. Press the enter key. The display will change again and show "CL22." Keep pressing the enter key until the numbers cycle through to the number "CL26." Press enter one more time. The letter E should appear on the display screen.
    • 4
Press enter twice more. The letters "SS" should appear on the screen. When this happens, press the start/stop key. Making sure to keep well away from the tread, press enter to start the treadmill. The treadmill will start on its own. The treadmill will stop on its own after a few seconds. When it stops, press the power key two times. Remove the safety key and put in a safe place. Your treadmill is reset.move on to the next step.
    • 2
Locate the reset switch on the underside of the treadmill console. Usually the button

Oct 16, 2013 | Exercise & Fitness

1 Answer

Horizon t207


follow this steps and fix it. God bless you

1.
    • 1
Unplug the treadmill. Locate the console key and place the safety or reset key into the treadmill console. Replace any parts that need replacing, or is large enough to trigger with a pencil eraser or Q-tip. Plug the treadmill plug back into the wall. Use the Q-tip to press the reset button. It may be necessary to hold the reset button down for a few seconds. "CL11" will appear in the display of the treadmill.
    • 3
Press the reset button one more time with the Q-tip. "CL21" should appear on the screen. Press the enter key. The display will change again and show "CL22." Keep pressing the enter key until the numbers cycle through to the number "CL26." Press enter one more time. The letter E should appear on the display screen.
    • 4
Press enter twice more. The letters "SS" should appear on the screen. When this happens, press the start/stop key. Making sure to keep well away from the tread, press enter to start the treadmill. The treadmill will start on its own. The treadmill will stop on its own after a few seconds. When it stops, press the power key two times. Remove the safety key and put in a safe place. Your treadmill is reset.move on to the next step.
    • 2
Locate the reset switch on the underside of the treadmill console. Usually the button

Oct 08, 2013 | Horizon Exercise & Fitness

1 Answer

Fitstride t920 treadmill faults


Reset the machine follow this steps and fix it. God bless you

1 )Locate the reset switch on the underside of the treadmill console. Usually the button is large enough to trigger with a pencil eraser or Q-tip. Plug the treadmill plug back into the wall. Use the Q-tip to press the reset button. It may be necessary to hold the reset button down for a few seconds. "CL11" will appear in the display of the treadmill.

· 2
Press the reset button one more time with the Q-tip. "CL21" should appear on the screen. Press the enter key. The display will change again and show "CL22." Keep pressing the enter key until the numbers cycle through to the number "CL26." Press enter one more time. The letter E should appear on the display screen.
· 3
Press enter twice more. The letters "SS" should appear on the screen. When this happens, press the start/stop key. Making sure to keep well away from the tread, press enter to start the treadmill. The treadmill will start on its own. The treadmill will stop on its own after a few seconds. When it stops, press the power key two times. Remove the safety key and put in a safe place. Your treadmill is reset

Oct 07, 2013 | Exercise & Fitness

1 Answer

Norditrack a2550 model stopped working while I was on it. The control panel will beep then light up like a Christmas tree but just goes into a nonperforming demo mode. Treadmill wont work! Help


follow this steps and fix it. God bless you

1.
    • 1
Unplug the treadmill. Locate the console key and place the safety or reset key into the treadmill console. Replace any parts that need replacing, or is large enough to trigger with a pencil eraser or Q-tip. Plug the treadmill plug back into the wall. Use the Q-tip to press the reset button. It may be necessary to hold the reset button down for a few seconds. "CL11" will appear in the display of the treadmill.
    • 3
Press the reset button one more time with the Q-tip. "CL21" should appear on the screen. Press the enter key. The display will change again and show "CL22." Keep pressing the enter key until the numbers cycle through to the number "CL26." Press enter one more time. The letter E should appear on the display screen.
    • 4
Press enter twice more. The letters "SS" should appear on the screen. When this happens, press the start/stop key. Making sure to keep well away from the tread, press enter to start the treadmill. The treadmill will start on its own. The treadmill will stop on its own after a few seconds. When it stops, press the power key two times. Remove the safety key and put in a safe place. Your treadmill is reset.move on to the next step.
    • 2
Locate the reset switch on the underside of the treadmill console. Usually the button

Oct 06, 2013 | Nordic Track NordicTrack Treadmill, A2550

1 Answer

I have a Reebok Competitor RT8.0 treadmill less than 2 years old. Consistently, every 4 minutes and 10 seconds it will stop & then in a few seconds resume the same speed? I have replaced the...


this happens to do the lack of maintenance schedule, and the machine shut down, for to protect the electronic system.
LUBE inmediately the DECK belt, maybe you have a WORN deck belt, time to replace the deck belt.
Try again, and test it
God bless you
10_16_2012_12_05_55_pm.gif

Oct 15, 2012 | Reebok Exercise & Fitness

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

yadayada
yadayada

Level 3 Expert

76051 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...