Need manual to trace wiring. One wire unconnected
SOURCE: wiring diagram
The Haynes Service and Repair Manual ISBN 1844252787 has the wiring diagrams for GZ 125 Marauders from 1998 to 2005.
SOURCE: Looking for an Owners Manual
Hi, not sure if this will help. Click the link and choose your model. All in PDF format and can be downloaded for free.... http://www.manualz.info/Manuals_pdf/SUZUKI/
SOURCE: how does the tank come off on a 2001 suzuki vz800 marauder
first take off the seat
when the front seat is removed you will clearly see 2 10 mm bolts holding down the tank...
you must also disconnect the fuel lines at the fuel shut off switch, i plug them with golf tees
perfect fit.
SOURCE: How many quarts of oil does my 2001 VZ800 Suzuki Marauder require
the bike should be straight up and down and the oli level should be in the middle of the glass you bike should take around 4 qts
SOURCE: I need to know the oil capacity of the front
FORK OIL
• Place the front fork vertically without spring.
• Compress it fully.
• Pour specified front fork oil up to the top level of the outer
tube.
Capacity (each leg): 490 ml (16.6/17.3 US/lmp oz)
99000-99044-L01: SUZUKI FORK OIL L01
or an equivalent fork oil
• Move the inner rod slowly with the special tool ten times and
more until no more bubbles come out from the oil.
09940-52841: Inner rod holder
NOTE:
Refill front fork oil up to the top of the outer tube so that bubbles
are visible while bleeding air.
• Refill specified front fork oil up to the top level of the outer
tube again. Move the outer tube up and down several strokes
until no more bubbles come out from the oil.
• Keep the front fork vertically and wait 5 – 6 minutes.
NOTE:
* Always keep oil level over the cartridge top end, or air may
enter the cartridge during this procedure.
* Take extreme care so as to pump out air completely.
• Hold the front fork vertically and adjust fork oil level with the
special tool.
NOTE:
When adjusting the fork oil level, compress the outer tube fully
without the fork spring.
Fork oil level: 153 mm (6.02 in)
09943-74111: Front fork oil level gauge
177 views
Usually answered in minutes!
×