Question about 2002 Harley Davidson FLHTCUI Electra Glide Ultra Classic
Use your 20W50 for crank. Use 80/90 Gear oil for tranny and something like 15w40 or 10w30 for the primary.
Posted on Mar 31, 2014
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: engine oil plug
Another way to locate it, is with the bike on the kickstand, look underneath of it from the right (brake) side. The oil drain plug is on the front of the square looking pan under, and to the rear of the engine. The oil drain is the plug on the front of that pan, on the left (shifter) side of the bike. The trans drain is on that same square looking pan, but towards the right side, and faces down. It screws in and out vertically, whereas the oil drain is horizontal
Posted on Apr 30, 2009
Drain the fuel either by siphening or removing the cross over tube at the front of the tank and letting it drain that way or just block off those cross over lines and leave the fule in the tank for removal.
0) remove seat
1) drain fuel
2) undo cross over line (bottom front of gas tank.
3) shut off pet **** and remove fuel line from pet ****.
4)there should only be 2 bolts holding the tank on, one at the top front of the tank and one at the back of the tank.
All in all a pretty easy (but possibloy messy) job.
Posted on Jun 06, 2009
Turn the Bike on and the Radio off and then follow the buttons on the screen. Most people think you have to do it while it is running and this does not work
Posted on Jun 28, 2009
The oil tank is on the bottom of the transmission. There are two drain plugs, one for the engine oil and one for transmission lube. The engine oil drain is the one closest to the left front of the oil tank. The drain that is more in the center is the transmission drain.
Posted on Feb 17, 2010
Your '98 Evo motor is what they call a "head breater" engine. This means that the crankcase ventilation is at the upper end of the heads rather than way down at the lower end of the engine like it used to be. They the first year for the "head breaters" was 1994.
Now, At the top of the heads where the rocker boxes are, there are three pieces. The lower rocker plate with the rocker arms in it, the middle piece and the upper cover. If you take the four bolts out, you'll see an umbrella valve in the middle piece of the rocker boxes. This valve is a replacable rubber piece. Over time and many times of heating up and cooling down, they can get brittle and allow a lot of blowby resulting in oil in your air filter element.
Now there is another part in the cam chest that has a lot of effect on the operation of the crankcase breather system on your bike. This part is called the "breather gear" and is located down in the cam chest to the rear of the camshaft. In you bike, the part is made of plastic if it's the original part. I have seen the teeth break off of the drive gear and the breather gear stop turning. This will screw up the "breathing cycle" on your engine and cause it to "blow oil". Usually, the oil pump locks up when this happens due to the plastic teeth getting in the oil pump but not always. If this eventually turns out to be your problem, have the mechanic or yourself install one of the new S&S reed valve type breather gear replacements. They don't turn at all and work absolutely great. The part is about a hundred dollars but it's well worth it. Solves the old broken breather gear problem that has plauged the Evo engine it's entire life.
There are no "screens" in the Evo engine other than the "tappet oil screen". Just in front of the oil pump is a screw plug that is in the engine cases itself. If you remove this plug, there is a small spring and cone shaped screen that filters the oil prior to it going to your tappets. This should be cleaned every other oil change but it has nothing to do with the oil in your breather.
Now some riders will tell you that if you allow your Harley to sit for any length of time that it will "oil sump" with you. By this, they mean that oil will seep past the check ball in your oil pump and pool up in your crankcase. When you start the engine up, oil will be blown into your oil filter. Not true on your Ultra. The bikes that will oil sump are the Sportsters, Softails, Shovelheads, or any bike that the oil tank is higher than the oil pump on the frame. On your Ultra, the oil tank is on the bottom of the transmission. Your bike will not "oil sump" unless you have a sheared key in your oil pump or the oil has somehow learned how climb. You oil tank is below your pump in other words and oil does not flow uphill.
Posted on Apr 03, 2010
Tips for a great answer:
Jan 29, 2013 | Harley Davidson FLSTC Heritage Classic...
Nov 08, 2012 | 2002 Harley Davidson FLHTCUI Electra Glide...
Oct 24, 2012 | 2002 Harley Davidson FLHTCUI Electra Glide...
Oct 23, 2012 | 2002 Harley Davidson FLHTCUI Electra Glide...
Aug 01, 2011 | 2002 Harley Davidson FLHTCUI Electra Glide...
Jul 27, 2011 | Harley Davidson FLSTF - FLSTFI Fat Boy...
Jun 05, 2011 | 1993 Harley Davidson FLSTF Fat boy
Aug 25, 2010 | 2001 Harley Davidson FLHTCUI Electra Glide...
Jan 27, 2010 | 2000 Harley Davidson FLHTCUI Electra Glide...
Apr 20, 2009 | 2000 Harley Davidson FLHTCUI Electra Glide...
Apr 24, 2018 | Motorcycles
213 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: