Question about 2009 KTM 50 SX

Open Question

Rear shock for 2008 ktm 50 sx - 2009 KTM 50 SX

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

dmsr63
  • 2050 Answers

SOURCE: 2006 KTM 125 sx high revving out problem

Look into your power valve. If it doesn't operate freely, you won't get peak performance. They can get gummed up.

Posted on Jul 27, 2009

  • 636 Answers

SOURCE: how do i check the tranny oil level on my ktm sx 125

I would think the it is all one unit, motor oil lubricates that as well.

Posted on Sep 05, 2009

  • 66 Answers

SOURCE: The rear shock on my 2008 125 SX is very squeaky.

i doubt its the shock cartridge, it may be the spring against the shock body or the upper or lower connecting joint. could also be the swingarm. remove the shock with bike on center stand and check the movement of your swingarm while checking for noise. at that time you can check the condition of the shock spring and bushings.

Posted on Oct 03, 2009

  • 66 Answers

SOURCE: how to recharge rear shock

08 needing recharged? if it needs recharged it probably needs new seals. it's cheaper to send it to http://www.factoryconnection.com/index2.htm than to take it to a dealership or buying the equipment needed to do it yourself $$

an alternative......convert it from pds to bladder and make rebuilding easier
http://www.racetech.com/EmailList/News/RTnews-080630.html

Posted on Oct 05, 2009

  • 3567 Answers

SOURCE: I GOT A KTM SX 85 2008. CONSTANT FUEL LOSS OUT OF

The float is stuck open. This causes the overflow and floods the engine.

Posted on Jan 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What type of clutch oil do I use for my 2006 ktm 250sxf


Do you mean brake fluid for clutch pump or oil for the engine?
If you ask about oil for engine KTM recomend Motorex Power Synt 4T 10W-50.
If you ask about the clutch brake fluid you will need brake fluid DOT 4 or DOT 5.1. See link: http://www.manualslib.com/manual/90432/Ktm-250-Sx-F.html?page=36

Oct 20, 2013 | 2008 KTM 250 SX-F

1 Answer

I have a 2008 KTM 105 SX and I don't know how much


Use 50:1 ratio or 2% oil in the mixture.
That means 20ml oil for every 1000ml (1lit) of gas.

Oct 22, 2012 | Motorcycles

1 Answer

Whats the torque specs on the cylinder and head of a 03 ktm 125 sx


Thanks for contacting FixYa. I was reviewing some of the older un-answered questions trying to ensure your issue has been resolved.

KTM Torque settings


  1. Collar screw, front wheel spindle Front axle nut 40Nm 30ft lbs
  2. Brake Caliper front Brake Caliper front Loctite 243 2 19ft lbs
  3. Brake Disk, front Brake disk front Loctite 243 1 11ft lbs
  4. Brake Disk, rear Brake disk rear Loctite 243 1 11ft lbs
  5. Clamping screws, upper fork bridge Top triple clamp 20Nm 15ft lbs
  6. Clamping screws, lower fork bridge Bottom triple clamp 15Nm 11ft lbs
  7. Clamping screws, fork stubs Front axle pinch bolts 10Nm 7ft lbs
  8. Collar nut, rear wheel spindle Rear axle nut 80Nm 59ft lbs
  9. Hex nut swingarm bolt Swingarm nut 100Nm 74ft lbs
  10. Hex collar screw handlebar clamp Upper handlebar clamps 20Nm 15ft lbs
  11. Allen head screw handlebar support Lower handlebar clamps Loctite 243 4 30ft lbs
  12. Shock absorber top Shock absorber top bolt 60Nm 44ft lbs
  13. Shock absorber bottom Shock absorber botton bolt 60Nm 44ft lbs
  14. Sprocket screws Rear sprocket bolts Loctite 243 3 25ft lbs
  15. Ball joint for push rod Rear brake pedal pivot Loctite 243 1 7ft lbs
  16. Engine mounting bolts Engine mounting bolts 45Nm 33ft lbs
  17. Engine brace Engine brace 33Nm 24ft lbs
  18. Screw adjusting ring spring preload Shock preload collar bolt 8Nm 6ft lbs
  19. Spoke nipple Spokes 5Nm 4ft lbs
  20. Other Screws on chassis M6 10Nm 7ft lbs
  21. M8 25Nm 19ft lbs
  22. M10 45Nm 33ft lbs
  23. Other collar nutes on chassis M6 15Nm 11ft lbs
  24. M8 30Nm 22ft lbs
  25. M10 50Nm 37ft lbs
  26. Front Sprocket 44ft lbs

TF

Aug 19, 2011 | 2008 KTM 125 SX

1 Answer

What oil does a 2007 ktm 250sxf take


Hi
Below 0 degrees C use SAE 10W/40 or 10W/50
Above 0 degrees C use SAE 15W/40 or 15W/50
API grade SG,SH

Ride Safe
Bike-Doc

Please rate this answer

Dec 05, 2010 | 2008 KTM 250 SX-F

1 Answer

2009 ktm 125sx torque settings for head and cylinder


Thank you for contacting FixYa with your inquiry. I have been going
over some of the older help requests that have been archieved and
trying to provide solutions for those that didn't get answered. Hope
this information helps.

KTM Torque settings


  1. Collar screw, front wheel spindle Front axle nut 40Nm 30ft lbs
  2. Brake Caliper front Brake Caliper front Loctite 243 2 19ft lbs
  3. Brake Disk, front Brake disk front Loctite 243 1 11ft lbs
  4. Brake Disk, rear Brake disk rear Loctite 243 1 11ft lbs
  5. Clamping screws, upper fork bridge Top triple clamp 20Nm 15ft lbs
  6. Clamping screws, lower fork bridge Bottom triple clamp 15Nm 11ft lbs
  7. Clamping screws, fork stubs Front axle pinch bolts 10Nm 7ft lbs
  8. Collar nut, rear wheel spindle Rear axle nut 80Nm 59ft lbs
  9. Hex nut swingarm bolt Swingarm nut 100Nm 74ft lbs
  10. Hex collar screw handlebar clamp Upper handlebar clamps 20Nm 15ft lbs
  11. Allen head screw handlebar support Lower handlebar clamps Loctite 243 4 30ft lbs
  12. Shock absorber top Shock absorber top bolt 60Nm 44ft lbs
  13. Shock absorber bottom Shock absorber bottom bolt 60Nm 44ft lbs
  14. Sprocket screws Rear sprocket bolts Loctite 243 3 25ft lbs
  15. Ball joint for push rod Rear brake pedal pivot Loctite 243 1 7ft lbs
  16. Engine mounting bolts Engine mounting bolts 45Nm 33ft lbs
  17. Engine brace Engine brace 33Nm 24ft lbs
  18. Screw adjusting ring spring preload Shock preload collar bolt 8Nm 6ft lbs
  19. Spoke nipple Spokes 5Nm 4ft lbs
  20. Other Screws on chassis M6 10Nm 7ft lbs
  21. M8 25Nm 19ft lbs
  22. M10 45Nm 33ft lbs
  23. Other collar nuts on chassis M6 15Nm 11ft lbs
  24. M8 30Nm 22ft lbs
  25. M10 50Nm 37ft lbs
  26. Front Sprocket 44ft lbs

TF

Nov 05, 2010 | 2008 KTM 125 SX

1 Answer

Need setting for 450 sx 08 forks and shock im 16st junor rider


what is that your looking for?? need to know alittle more before i can point you towards your answer

Feb 21, 2010 | 2008 KTM 450 SX-F

1 Answer

I need engine torque settings on my 2008 ktm sxf 250 motorcross bike


Thank you for contacting FixYa with your inquiry. I have been going
over some of the older help requests that have been archieved and
trying to provide solutions for those that didn't get answered. Hope
this information helps.

Try these:

KTM Torque settings


  1. Collar screw, front wheel spindle Front axle nut 40Nm 30ft lbs
  2. Brake Caliper front Brake Caliper front Loctite 243 2 19ft lbs
  3. Brake Disk, front Brake disk front Loctite 243 1 11ft lbs
  4. Brake Disk, rear Brake disk rear Loctite 243 1 11ft lbs
  5. Clamping screws, upper fork bridge Top triple clamp 20Nm 15ft lbs
  6. Clamping screws, lower fork bridge Bottom triple clamp 15Nm 11ft lbs
  7. Clamping screws, fork stubs Front axle pinch bolts 10Nm 7ft lbs
  8. Collar nut, rear wheel spindle Rear axle nut 80Nm 59ft lbs
  9. Hex nut swingarm bolt Swingarm nut 100Nm 74ft lbs
  10. Hex collar screw handlebar clamp Upper handlebar clamps 20Nm 15ft lbs
  11. Allen head screw handlebar support Lower handlebar clamps Loctite 243 4 30ft lbs
  12. Shock absorber top Shock absorber top bolt 60Nm 44ft lbs
  13. Shock absorber bottom Shock absorber bottom bolt 60Nm 44ft lbs
  14. Sprocket screws Rear sprocket bolts Loctite 243 3 25ft lbs
  15. Ball joint for push rod Rear brake pedal pivot Loctite 243 1 7ft lbs
  16. Engine mounting bolts Engine mounting bolts 45Nm 33ft lbs
  17. Engine brace Engine brace 33Nm 24ft lbs
  18. Screw adjusting ring spring preload Shock preload collar bolt 8Nm 6ft lbs
  19. Spoke nipple Spokes 5Nm 4ft lbs
  20. Other Screws on chassis M6 10Nm 7ft lbs
  21. M8 25Nm 19ft lbs
  22. M10 45Nm 33ft lbs
  23. Other collar nuts on chassis M6 15Nm 11ft lbs
  24. M8 30Nm 22ft lbs
  25. M10 50Nm 37ft lbs
  26. Front Sprocket 44ft lbs
TF

Oct 29, 2009 | 2008 KTM 250 SX-F

1 Answer

How do i remove the bushing in the swing arm where the rear shock is connected


put it on a table buddy get a socket that fits in there nicely and just bash the thing hard till it pops out if no good get back to me i have another option

Oct 08, 2009 | 2008 KTM 144 SX

1 Answer

The rear shock on my 2008 125 SX is very squeaky. It is the actual shock that is squeaky, not the point where it goes into the swing arm. Any suggestions??


i doubt its the shock cartridge, it may be the spring against the shock body or the upper or lower connecting joint. could also be the swingarm. remove the shock with bike on center stand and check the movement of your swingarm while checking for noise. at that time you can check the condition of the shock spring and bushings.

Oct 03, 2009 | 2008 KTM 125 SX

Not finding what you are looking for?
2009 KTM 50 SX Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top KTM Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Brian Anderson

Level 3 Expert

356 Answers

Are you a KTM Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...