Question about 2011 Triumph Tiger 800

Open Question

Triumph tiger 800 oil light stays on - 2011 Triumph Tiger 800

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 10865 Answers

SOURCE: Can't start my Triumph tiger 955i 2005

let is sit for a day and dry out. you probably got moisture into the spark plugs, or the distributor, or the wires. if you have a battery charger, charge the battery while you are waiting.

Posted on Jun 19, 2009

DoubleClutch
  • 376 Answers

SOURCE: '04 Triumph Tiger clutch cable

If it is running alone the back bone then yes you will have to remove the tank.

Posted on Oct 16, 2009

  • 2309 Answers

SOURCE: How to adjust valves for a 1970 triumph Tiger motorcyle ?

it's been a while, and there always a different spec depending which manual you got, preset 17 thou for exhaust and 14 thou for intake, run engine till warm , if still noisy let engine cool and tighten a couple of thou each, repeat if necessary, it sound wishy washy but it has worked for me in the past

Posted on Jul 26, 2010

  • 5 Answers

SOURCE: How do I change the oil on a 96 Triumph Tiger?

If you look at the front wheel, now look about six inches behind that. Theres a hex nut right below the exhaust pipe coming out of the engine. Should be at the lowest point on the engine in the front. You have to remove the skid plate.

Posted on Jan 27, 2011

Testimonial: "exactly what i needed in plain english "

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi How long should the service take when checking shims ? Sorry Triumph Explorer 1200 (2014)


Hi, Mark all depends on the mileage but a 20,000 service takes which includes checking and adjusting valve clearance takes about 7 hours for more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Triumph 2012 2015 Tiger Explorer 1200 Service Repair Manual Download... $18
Hermys Tire Cycle Inc 2013 Triumph Tiger Explorer Genuine Motorcycle Parts...
Triumph Tiger Explorer Owner Handbook Manual
Triumph Tiger Explorer 2014
Triumph Tiger Explorer

May 05, 2017 | 2013 Triumph Tiger Explorer

1 Answer

Why wont my Triumph tiger 800 xc (2014) start - headlight lights up though? Cant move it either!


Hi, Glen and the usual suspects are:
1. Fuel tank empty.
2. Fuel supply valve/petcock turned off.
3. Fouled spark plugs.
4. Engine flooded as a result of overuse of the enricher.
5. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
6. Fuel valve/petcock or filter clogged.
7. Fuel line to carburetor or throttle body pinched or kinked.
8. Carburetor float stuck.
9. Fuel injectors clogged.
10. Severely discharged or damaged battery, you need 12.5 volts or better and be able to pass a load test if necessary.
11. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
12. Loose or corroded wire connection at the coil, battery or plug between ignition sensor and CDI box.
Spark plug cables in bad condition and shorting check for leakage in the dark, cable connections loose, or connected to the wrong cylinders.
13. Ignition timing incorrect due to a faulty MAP, CKP, O2, TPS, sensors.
14. Faulty neutral, clutch lever, or kickstand safety switch.
15. Faulty fuel pump or fuse or relay.
16. Faulty CDI box.
17. A stuck bent or burnt valve.
18. Tip over sensor needs a reset.
19. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.triumphrat.net/tiger-800-800xc-mods-and-workshop/229064-wont-start.html
Triumph Tiger Service Manual
Triumph Manassas Shop and save on Genuine Triumph Motorcycle Parts...
Triumph Tiger 800 Owner Handbook Manual

Sep 11, 2016 | 2014 Triumph Tiger 800 XC ABS

2 Answers

Where is the indicator relay?


Hi, Ewan my gut tells me you may have a faulty wire connector for the handlebar wiring harness, corroded, loose or broken pins or a loose ground if all those things use the same ground lug/connection
what you need is a test light and wiring diagram for more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
2007 Triumph Tiger wiring diagram Google Search
05 st1050 Wiring Diagram
WIRING DIAGRAM thread for all sorts of bikes
Triumph Motorcycle Tiger SE Sport 2005 2014 Service Manual Download...

Apr 25, 2016 | 2007 Triumph Tiger

1 Answer

How to check oil level on 2007 955i truimp tiger


Put the bike on central stand, on the right back site of engine is a black cap, unscrew it, take it out, wipe it and put it back without screw it in. You can now check the oil level.

Apr 25, 2014 | 2007 Triumph Tiger

1 Answer

Removed battery. check engine light came on


make sure its at 12.6volts--clean connections too--take bac out try ovr--mite need to scan system

Jan 19, 2013 | 2007 Triumph Tiger

1 Answer

I am looking for a 1993 tiger 900 workshop manual as cheap as poss can you help Paul


Here is a site that offers a 1993 Triumph Tiger motorcycle repair manual.

The price is $ 35 . This seems resonable for a repair manual.

Good luck

http://www.bikebandit.com/1993-triumph-tiger-motorcycle-repair-manual/c/a642315?mg=11964&t=1

Jul 06, 2011 | 1993 Triumph Tiger

2 Answers

How do I change the oil on a 96 Triumph Tiger? Where is the oil plug?


If you look at the front wheel, now look about six inches behind that. Theres a hex nut right below the exhaust pipe coming out of the engine. Should be at the lowest point on the engine in the front. You have to remove the skid plate.

Jan 27, 2011 | 1996 Triumph Tiger

1 Answer

'04 Triumph Tiger clutch cable


If it is running alone the back bone then yes you will have to remove the tank.

Oct 16, 2009 | 2004 Triumph Tiger

1 Answer

I need a complete wiring diagram for a 1998 triumph tiger 885 3 cyl. has no dash lights, brake light tail light, no power to the headlight/taillight fuses.


Become a member (if you aren't already) at tigertriple.com and post a want in the Steamers section. When I see it, I'll PM you with a copy of the schematic.--Sinn'

Feb 20, 2009 | 1998 Triumph Tiger

Not finding what you are looking for?
2011 Triumph Tiger 800 Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Triumph Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Triumph Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...