Question about 2005 Harley Davidson FLHTCUI Electra Glide Ultra Classic
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
1.cover the tank with towls beachtowls 2.remove switches,unbolt both ,clutch and front brake from bars,leftside grip pry under it with a flat crewdriver and spray under it with hairspray and turn on it to make it come off, right side loosen the bars and move them so when you loosen the rightside it can come right off.unbolt the bars from center of the bars
Posted on Mar 27, 2009
Drain the fuel either by siphening or removing the cross over tube at the front of the tank and letting it drain that way or just block off those cross over lines and leave the fule in the tank for removal.
0) remove seat
1) drain fuel
2) undo cross over line (bottom front of gas tank.
3) shut off pet **** and remove fuel line from pet ****.
4)there should only be 2 bolts holding the tank on, one at the top front of the tank and one at the back of the tank.
All in all a pretty easy (but possibloy messy) job.
Posted on Jun 06, 2009
Turn the Bike on and the Radio off and then follow the buttons on the screen. Most people think you have to do it while it is running and this does not work
Posted on Jun 28, 2009
well the easy way is to jack up bike remove the nut jiffy stand slide it out hook spring slide it back in and tight nut hope this helps
Posted on Sep 30, 2009
Disconnect battery , remove the outer primary case, pull back the lock tab on the starter jackshaft, unbolt the retainer screw, then remove the two starter bolts from the right side, sometimes you need to loosen the oil tank mounts to get at these, slip the starter and coupler out as a unit, replace the coupler and jackshaft the same way they came out when the new starter goes in, install bolts , retighten the jackshaft bolt and bend over the retainer, install and fill primary case, connect battery thats it buddy
Posted on Oct 12, 2009
Tips for a great answer:
Aug 23, 2015 | 2005 Harley Davidson FLHTCUI Electra Glide...
Feb 15, 2015 | 2005 Harley Davidson FLHTCUI Electra Glide...
Feb 21, 2014 | 2000 Harley Davidson FLHTCUI Electra Glide...
Nov 08, 2013 | Harley Davidson FLHTCUI Electra Glide...
Dec 10, 2012 | 2005 Harley Davidson FLHRS - FLHRSI Road...
Jun 14, 2012 | Harley Davidson 2007 HarleyDavidson FLHTCU...
Apr 29, 2012 | 2008 Harley Davidson FLHTCU Ultra Classic...
Jun 21, 2011 | 2000 Harley Davidson FLHTCUI Electra Glide...
Sep 11, 2010 | 2000 Harley Davidson FLHTCUI Electra Glide...
Apr 17, 2010 | 2005 Harley Davidson FLHTCUI Electra Glide...
216 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: