Question about Honda Motorcycles

Open Question

CAP.FRONT FORK OIL CG 125 CARGO

CANT FRONNT FORK OIL CG 125 CARGO

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

fastboyz
  • 674 Answers

SOURCE: KX 125 (2003) motorcycle

its 120 mm or 4.7 inches from the top of the fork
Some measure the oil quantity and fill the fork up, some fill the fork up and measure the oil level. The most correct method is to measure the level, I guess, but many guys measure in quantity.. both ways work well.
1dcced6.jpg

Posted on Nov 28, 2008

  • 47 Answers

SOURCE: front fork oil capacity?

Piaggio have a technical help line with a free phone number, try their website

Posted on May 10, 2009

  • 53 Answers

SOURCE: front fork leaking oil from bottom of the seal.

change the oil seals and oil in the fork,and avoid wheelies on the bike and off road biking 

Posted on May 17, 2009

hawk127311
  • 350 Answers

SOURCE: how much 5w oil goes into each fork?

Using 5w oil with stock springs, your oil level should be about 100mm from the top with the fork fully compressed, damper rod pushed all the way down, and the spring out. I hope this helps and good luck. Please vote and leave a message.

Posted on Oct 30, 2009

ollie reece
  • 1167 Answers

SOURCE: fork oil capacity

medium fork oil - 150 mls in each leg

Posted on Nov 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I harden up the front forks on my Honda 125 Varadero please


Measure the diameter of the springs top,cut pipe(Usually stainless steel)and remove the tops of the forks,install the spacers in each fork tube and enjoy-Experiement with the lengths,typically start with 1 1/2~3 inches.....You can also change the thickness of the fork oil...The tubed method does not require higher air pressure to work....

Sep 15, 2014 | 2004 Honda XL 125 V Varadero

1 Answer

2001 Honda CD 125 fork oil capacity


Hi, Anonymous for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing and printing please click on the blue links below. Good luck and have a wonderful day.
Honda CG 125 Job 05
Honda CG125 2001 Fork Oil
manual motor honda cg titan 125 pdf Honda Motor Vehicle Manufacturers
http://www.partsfish.com/page/oem-parts-for-honda
http://mybikemanuals.com/honda

Jul 08, 2014 | 2001 Honda Cd 125T

1 Answer

Hi folks, Was caught out in very heavy rain with my CG 125 and after 15 mins the bike started to backfire and a few minutes later cut out completely, after standing still for a little while it started...


you have water in your electrical system ..the coils on cg are well known fro small cracks ..get a new one fit it should be ok /.....also spray wd40 on all electricals every couple of weeks especially under the tank

Aug 06, 2013 | 2000 Honda CG 125 Cargo

1 Answer

Problem with ignition system.... i check fire from


Try a new spark plug. Also, the plug wire may have gone bad or the plug cap may have a bad connection.

Jul 01, 2010 | 2000 Honda CG 125 Cargo

1 Answer

Changing oil in forks


lower for legs there should be a drain bolt for each leg do one side at a time.
Take the top fork cap off be careful the top cap is spring loaded get a pan to catch the oil,remove the drain bolt let it drain.reolace the drain bolt then you can add your new fork oil,check your owners manual for the proper amount and weight oil you need to replace, replace the fork cap.
repeat steps on the other fork.

May 09, 2010 | 1983 Honda XL 125 R

1 Answer

My honda cg 125 is stuttering as i hit bout 30 mph though iv checked the oil and that seems ok?


Drain the carb folat bowl. Chances are condensation has made it into the bowl causing the sputter. A new spark plug never hurts. The same for a clean air filter.

Dec 30, 2009 | 2000 Honda CG 125 Cargo

1 Answer

Fork oil capacity


medium fork oil - 150 mls in each leg

Nov 01, 2009 | 2005 Yamaha Ybr 125

1 Answer

Front fork oil seal replacement


General intructions for most bikes:

Remove front wheel. Loosen fork tube clamps at top and bottom of triple clamps. Slide fork tubes out and remove. Access to seals is from top of tube. Remove cover and unscrew cap. Shop manual for specific bike is $24-$30. Will show detailed instructions.

Good luck;
Techjoel

May 14, 2009 | 2001 kawasaki KDX 125

1 Answer

2002 kx 125 fork oil level


3.5 inches to 5 inches from the top of the fork with the cap removed.

May 02, 2009 | 2003 kawasaki KX 125

1 Answer

Change oil to Honda nsr 125 front suspension?


A /REMOVE CLIPON HANDLE BARS FROM THE BIKE BY UNDOING ALLEN BOLTS AND SLIDE UPWARS AND OFF
B/JACK BIKE UP SO FRONT WHEEL IS OFF THE GROUND
C/UNDO SLOWLY AND CAREFULLY THE TWO BIG CAPS TOP OF THE SUSPENSION TUBES/
THIS CAREFULLY AS THEY ARE UNDER PRESSURE FROM SPRINGS
C/SLIDE OUT THE SPRINGS ITS BEST TO DO ONE SIDE AT A TIME SO YOU DONT GET THE SPRINGS MIXED UP ALSO REMEMBER WICH WAY UP THEY WERE TOP IS NARROW SPACED
D/ REMOVE FRONT WHEEL
E/ UNDO FORK HOLDING BOLTS AND SLIDE OUT THE SUSPENSION
F/GET A BUCKET AND TURN UPSIDE DOWN SLIDE THE TUBE IN AND OUT TO REMOVE OLD OIL
G/ REFIT TUBES THE GROOVE AT THE TOP OF THE FORK TUBE IS LINED WITH THE TOP OF THE YOKES
TIGHTEN UP ALL BOLTS REPLACE SPRINGS AND FILL FORKS WITH 280ML OF OIL EACH SIDE FINALY REPLACE CAPS AND TIGHTEN DOWN CAREFULLY REFIT CLIPON HANDLEBARS RE FIT WHEEL JOB DONE

Feb 04, 2009 | 2001 Honda NSR 125 R

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...