Question about 1998 Honda CBR 600 F(3)W

1 Answer

1996 CBR 600 F3 Removing Spark Plugs

I have two F3s, and cannot get a spark plug wrench in the head of one of them. The plug camber is tapered. It seems to guide the plug wire in, yet there is no clearance for the socket to fit around the plug nut. The tapered wall does not seem to be an inserted piece of metal, but maybe it is.

How do I get the plugs out?

Posted by on

  • 1 more comment 
  • longjump76 Jan 02, 2009

    Thanks! I was starting to think I was doing something wrong. The special wrench is on order from my local Honda shop. If it works it will be worth the $16.

  • longjump76 Jan 12, 2009

    The Honda socket worked great. Accessing the 2nd plug in from the starboard side was a trick, but the Honda tool worked.

  • myrocco1141
    myrocco1141 Feb 28, 2012

    thanks i thought the plug was stripped

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 83 Answers

There is a special plug wrench for this. The socket is very thin and narrowly fits in the hole. The plug cap has a rubber grommet that seals the tube.

Posted on Jan 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Having problemas after changin my spark plugs


Check the plug gap to be sure they are correct and make sure the insulator are not cracked.

May 03, 2013 | NiceCycle Honda CBR 600 F3 1998 "Front"...

1 Answer

I don't know which spark plug wires go to which cylinders in my honda cbr 600 f3. Can you please tell me which ones are for which cylinders?


If you look on each plug lead, there should be a number 1, 2, 3 4.

Put them onto the relevant cylinders . !

Sep 07, 2011 | 1998 Honda CBR 600 F(3)W

1 Answer

Any good tips how change spark plugs on 00 cbr 600,have tank and air box off,But its hard to get in at them. cheers


get some good flex adapters and u can pretty much get any bikes spark plugs and modify a 1/4 in socket wrench to a 3/4in

Feb 15, 2011 | Honda CBR 600 900 929 954 1000 RR KEYCHAIN...

1 Answer

How to change spark plugs on a 1998 Honda CBR 600


Remove spark plug cable from top of spark plug and use a socket set to remove spark plug and then place new spark plug and tighten it to required Torque which is specified in Repair manual for your bike

Jun 23, 2010 | 1998 Honda CBR 600 F(3)W

2 Answers

Do i nee a certain tool to get to the spark plugs in a 2001 chevy metro


There are no "special" tools required. Here is how you would do it:

NOTE: This engine is equipped with an aluminum cylinder head. Allow the engine to cool before removing spark plugs. Removing the spark plugs from an engine at operating temperature may damage the spark plug threads in the cylinder head. Also be sure to clean any dirt or debris from around spark plug holes prior to removing spark plugs.

I also recommend putting a small amount of anti-seize compound on the threads of the spark plugs when installing. Be careful not to under or over-tighten because cylinder head damage could result. If you have access to a torque wrench, the specification is 11 foot pounds.

  1. Disconnect the ignition coil electrical connectors.
  2. Carefully release the number 1 spark plug wire from the clip on the number 2-3 ignition coil.
  3. Remove the 2 bolts from each ignition coil.
  4. Remove the number 1 spark plug wire and the number 1-4 ignition coil from the spark plugs.
  5. Remove the number 2-3 ignition coil and the number 3 spark plug wire from the spark plugs.
  6. Remove the spark plugs from the cylinder head.
  7. Reverse proceedure to install.

Nov 08, 2009 | 2001 Chevrolet Metro

1 Answer

My 1995 cbr 600 f3 has no spark


Change the spark-plug.If don`t work check the induction coil.

Aug 25, 2009 | 1995 Honda CBR 600 F(3)S

1 Answer

97' cbr 600 rr f3 doesn't start


check to see if fuel switch is on...when was the last time carbs were checked?

Dec 24, 2008 | 1997 Honda CBR 600 F(3)V

3 Answers

CBR 600 F3 1996, stored for 4 years


It might be a good idea to flush everything out with clean oil. And maybe clean the oil filter. And clean the crankcase and stuff.

Dec 03, 2008 | 1985 Honda XR 250 R

2 Answers

Bike wont turn over


I have a 1996 cbr 600 f3 and when I first bought it used it would not turn over for the life of it. It turned out that a major problem was the spark plugs needing to be replaced. Thats the first thing to do. Next clean out those carbs with some good carb cleaner.

Nov 10, 2008 | 2005 Honda CBR 600 F

Not finding what you are looking for?
1998 Honda CBR 600 F(3)W Logo

Related Topics:

1,811 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

70365 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...